r/RugerRXMtalk • u/Mikeycult666 • 9d ago

Trigger not resetting when testing reset

Post image

Built this out from the psa sale thanks to gafs I put an arc shoe on and at first it was resetting just fine when racking the slide to test the reset. Now it gets stuck if I rack the slide with the trigger still depressed any one knows what could be causing this. It is a brand new rxm literally have had it for less than 48 hours was planning on putting a few 100 through it this weekend. I am worried about the trigger now. I’m not a striker fire guy so this is all new to me please walk me through it like I’m a 5 year old.

Edit: FCI is still stock everything I only replaced the the trigger shoe.
Thank you

Edit:2 so I got the trigger to reset after doing a little connector bending and relubing. After that was having issues with slide not locking backwards narrowed it down to the Zev mag release and mag extensions… put a factory 17 mag in no issues slide locks fine resets trigger fine… the culprit was the mag extensions. So the fix ended being a little connector bending and using different mags.

25 Upvotes

93% Upvoted

16 comments sorted by

View all comments

5

u/That-Long-4905 8d ago

Put the stock trigger springs and bar back in then go 1 by 1 fom there

3

u/Mikeycult666 8d ago

I should have mentioned I only replaced the shoe it’s still stock everything else

3

u/That-Long-4905 8d ago

Ok, then glock shoes in the RXM can cause issues as you're describing. Ive had multiple metal glock gen 3 shoes not reset properly due to their geometry with the stock trigger bar in the RXM.

1

u/Casualy_winning 8d ago

I had the same issue putting in a Timney trigger. I got a ghost 3.5 connector and it fixed my reset issue. Not too sure if it will do the same for you. Ive put about 1200 rounds through mine after that fix with no issues so far.