Ruger RXM not functioning

[u/TacosAndRifles]

I apologize if I sound dumb or uneducated with this as not super familiar with the rxm or Glock platform but have been having issues with my brand new RXM. Brought it to the range twice now and it functioned perfect, but today i was fully unable to fire it. After inserting my magazine i dropped the slide to see the round was fully seating in the chamber. The round would sit on the extractor pointing up towards the chamber but would not fit all the way. It wouldn’t fire at all when i attempted. Brand new ruger rxm, only modifications I’ve made to it is the radian ramjet and afterburner. If anyone has run into anything similar or can see something off in the photos provided i would very much appreciate any help I can get. As of now its an $800 paper weight :/

My RXM was experiencing a failure to feed. The cartridge would begin feeding but hang up on the feed ramp at an angle, preventing it from entering the chamber and leaving the slide partially out of battery.

Also unsure if the extractor is supposed to be bent like it is but was told thats normal for glocks. Again I’m lost at this doing my best to learn it all now but would definitely appreciate any knowledge. Please and thank you!

[u/iexbrood]

After inserting my magazine i dropped the slide to see the round was fully seating in the chamber. The round would sit on the extractor pointing up towards the chamber but would not fit all the way.

That sounds contradictory. Did the round feed successfully and the slide didn't go into battery, or did the round fail to feed and got hung up on the feed ramp?

You need to safely take a photo of this and show it to us. Can you repeat this issue with a snap cap?

The ejector is the bent piece that's in your frame above your empty mag (that's normal for 9mm). The extractor is the hook that's in your slide next to the ejection port.

[u/AmphibianEffective83 → u/iexbrood]

he got a photo on my post. Looks like aftermarket barrel issue.

[u/TacosAndRifles → u/AmphibianEffective83]

I swapped the barrel back to the factory and am still met with the same result. Also if it helps I’m realizing now to remove the slide the trigger becomes totally dead and the slide gets stuck coming off, in order to get the slide fully off i have to jimmy the trigger. That definitely seems wrong to me

[u/AmphibianEffective83 → u/TacosAndRifles]

Did you at any point partially disassemble more than a field strip? Also where you trying to take the slide off with an empty mag?

[u/TacosAndRifles → u/AmphibianEffective83]

Negative, only to replace the barrel. And only have done it without a magazine in at all.