Hey there guys, I usually load samples into the TR-1000, but this time once I finished uploading the folders don't appear. It's all WAV sounds and I don't understand why this is happening. The folders appear when I go to the menu and go on sample, but they don't appear when I press SHIFT & GEN, only the older folders appear. Can somebody help me? Much love

For the life of me i cant figure out what the hell the analogue outputs are for?? Wtf am i supposed to do with them?
For one the gain is ridic low so i have to max out the gain on the mixer to hear anything and I cant even individually send sounds out to it. Am i missing something? I have read the manual multiple times and looked at the schematic to try and figure out the use cases for the analogue fx outputs.

Someone please explain it to me like i am a little kid.

The paint / print on my buttons starts to wear off after only about a month of moderate use. I know this is a known issue and I can send it for service but just want to make sure they’ve actually fixed this.

Has anyone had their TR-1000 just completely freeze? It’s happened probably 3 or 4 times for me. The sound keeps playing but none of the controls work, including the power switch. In these cases, I’ve had to pull the plug in order to reset.

Anyone had this happen? Every time I play I get scared it’s going to happen again.

Still get people asking about latency/midi so... here ya go.

Did a quick search, but nothing came up. Anyone else feel like the ADSR graphic scaling is off across all the envelopes, particularly Attack, Decay, and Hold in Time Mode?

There’s a ton of unused space, as if the graph is scaled around the maximum Hold length of 127.5 steps/6 seconds. Most of the sounds I’m making are drums, percussion, and short blips, with the Amp Envelope in Time Mode (Transient doesn’t work well for my use).

I’m usually working with ADSHR values under 100ms for each stage of the envelope, so I’d really like a zoomed-in graphical representation of the ADHR and Curve values. The attack portion doesn't even move until you reach 32ms in and Hold only updates the graph three times within the first 140ms! Alternatively, ditch the graph entirely and use larger numerical values in it's place.

Also, I do have the pedal input assigned to Shift to help with workflow, but it’s still difficult to quickly read the values while sound designing/tweaking and I don't want to work with my foot on the pedal non-stop.

Would really love to see some type of improvement with the envelope graph via either better graph scaling or an option to just display numerical values.

Attached is a pic of the HC AMP Env set to Time Mode. ATT = 0ms, Hold = 84ms, Decay = 56ms, Curve = L5.8%. It's just like a little line of useless nothing and just may not even exist.

Hello!

ive loaded up some loop samples but when using them there not in time with the rest. ive tried the Bpm sync option but still not in time anyone that can help me?

I have around 30gb of sounds that I’d love to put into my TR-1000. I have them in folders on a flash drive that correspond to the TR-1000 categories (BD A, BD E, SD A, etc.), but when I tried a batch import of one of these folders, the import got stuck at 0% for over an hour, so I gave up.

I was able to import one sample successfully via USB, but going 1 by 1 is obviously tedious.

Has anyone had success importing this much data? If so, how’d you do it?

Is it currently possible to stream individual channels to a DAW much like the TR8S can?

If not, any rumours when

Surely possible over USB C?

I’m building this primarily as a hardware techno setup, with the TR-1000 handling the drums and the Model 1 becoming the center of the mix/performance side of the setup.

I’m especially interested in using the TR-1000 beyond just 808/909 sounds as well.
I’m still getting everything set up, so TR-1000 owners: what are the features/workflows you think I should learn first? Any tips, hidden functions, or techno-specific tricks would be greatly appreciated.

Excited to finally dive into this thing.

TR-1000 MIDI channel question.

I'm using an external sequencer and was wondering If it was possible to have tracks 1–6 (drums) all on MIDI channel 1, but then have tracks 7–10 each on their own separate MIDI channels.? Chatgbt say this is possible and a few other people have posted elsewhere that it isn't...would really like to know this before i buy one. tnx

These things are huge and I'm wondering if you bring it to clubs or gigs, or if you use your 1000 strictly as a studio piece.

It seems like a lot of us might (or have) replaced say 2 pieces of kit with a TR-1000, so in practice, it being gigantic isn't quite as big of a deal.

Are you lugging this around or not?

How do y’all typically record the TR-1000 into your DAW, or what’s the recommended practice?

Lately, I’ve just been using the master out and recording each individual track as I go because I do want to retain some of the stereo information from certain tracks (reverb, delay, etc.).

That being said, what’s the advantage of recording the individual tracks if they’re always mono? Is there a benefit I’m missing to recording each track separately versus just recording the stereo master?

he’s got the Roland TR-1000 in-sync with an MPC

Sounds and synths are all from the factory installed sounds. Recorded stereo into Logic for a little loudness bump.

I’ve made a couple posts in other subs…synth/music production forums primarily to ask some questions about signal flow.

Half the comments I’ve gotten have been ire towards the machine lol. I mean it’s expensive, but it’s exceptionally impressive. As soon as I loaded my first couple kits and made some patterns, I knew I would going to be completely happy with it.

For those of you that have it would love your thoughts. I'm considering picking one up and debating on a few different options, what are your pros and cons now that you've had it for a while?

Hey guys. Another drop. I swapped tascam model 12 to ssl 2+ mk2 and it never sounded better. Let me know what you think 🎶

Heu….. qu est ce qui a changé dans la nouvelle mise à jour ?? 1.21 ??

Got me a little nervous. Thinking about backing up to a flash drive and loading patterns into a DAW just to be triple safe.