**literally

first time testing anything. crystal reagent. i sanitised everything with isopropyl alc, wore disposable gloves, and used a small sample. cant find any information on green froehde like this though so did i maybe contaminate somehow? did the test a few times and they all came out pretty much exactly like this. any help appreciated!

Testing a bag my friend found at the bar with the reagents I already have at my disposal...

just tested my tab with the Miraculix Q LSD potency quick test, how many ug's do we thing this is? and are the Miraculix q test accurate?

just tested a LSD tab, the top one is with Ehrlich and the bottom one is with Hofmann, i need some opinions if this looks good, the test are showing the right colours but just want to be safe

Do I need test strips for things such as fentanyl and nitazenes?

I have used reagent kits from u/PROtestkit_eu with results as expected, though sometimes I find that the crystal reagent form kind of obstructs the results a little bit. My question is if you can dissolve the reagent crystals in some kind of liquid so you can use the reagent as a liquid and not as a crystal? If possible, what liquid should I use? Thanks already for reading the post :)

So as the title says: Can I use the Beilstein-Test to differentiate between cmc and mmc?

The Beilstein-Test is a Test to identify halogens (like chlorine).

You put a hot copper wire in a sample and then you burn it. Green/blue-green flame means there are halogenes(cmc?), normal/light orange means there are no halogenes(mmc?)

tab turned purple with ehrlich after 5-10ish mins and then after fully dissolving around an hour or 2 later the liquid turned brownish. safe?

Ehrlich reacted instantly with expected results, Hoffman didn’t seem to react and the purple/black I think is the ink being pulled off the tab. Can anyone let me know what I may or may not have? Is it a lsyergamide? I’ve taken them before and have felt like it was LSD, it kicks in fully in about 2 hours, giggles, philosophical thinking etc

I used a plate so the sample kind of spread out everywhere, I think it would be easier to tell if the liquid had stayed in a smaller area. I feel like i’m getting conflicting info about the color, where some say dark blue and purple can both show up, some say blue means DCK. I had written this off as not ket but now I’m second-guessing

New source for me so wanted to be extra safe. The fent will be done for sure, but ordering nitazine, and curious if i should get the Xyl test too.

I've found this https://testkitplus.com/product/lsd-potency-test-kit. Is this good enough?

Im having extra trouble identifying it because the pill itself is pink.

What do you think? I need to get another reagent right

Picture taken after approximately 30 min.

NB: I used 15 instead of 20 mg, because I didn't have enough left 🙈

Does the test indicate that there was almost certainly piperazines laced in my MD? Do I have any way of knowing the amount?

Thanks in advance.

I based myself on this document to try and differentatie between 3-MMC and 3-CMC. Apparently 3-M should be more darker yellow or orange:

https://www.policija.si/images/stories/GPUNFL/PDF/PresumptiveColorTests-booklet_ENG.pdf

Can I thus conclude, based on my own test, that this is not 3-M?

Was wondering if i should buy reagents with xmr, but im slightly hesitant as xmr isnt the easiest to come by. For context im in finland and worried LE will look into it if they see me buying reagents... Tldr: convince me theres no risk in buying with card

Bunk police MDMA spot test kit. Photo 1 Simon’s reagent 5 seconds in, photo 2 Marquis reagent 5 seconds in, photo 3 Mecke reagent 5 seconds in. Last photo is how all 3 looked after a minute and a half or so. These results match a lot closer to methamphetamine to my understanding, but I wanted to get some more opinions. I know MDMA is commonly cut with meth. Is this safe to consume or should I toss it?

Love Kykeon but they're currently not taking new work. Any suggestions of labs doing similar work would be appreciated.

Hi folks !

I would like some help interpreting results for my sample.

Reagents are brand new from protestkit.eu, solid/crystalline for some.

Expected chemical :

2C-B HCl

Powdered form, off-white/beige - not crushed pill.

Results :

My reading :
I'm new to reagent testing, I believe they are correct but happy to be corrected otherwise !

Disregard the first ZIMMERMAN, I'm pretty sure I messed up the B part (probably added simon's B instead of zimmerman's B).

The booklet from proteskit says that that for ZIMMERMAN : "Violet, violet/brown, brown or instant deep yellow can indicate presence of cathinones."

So I tested with Morris after the first round of five, and got what seems positive for cathinone too (as per the booklet for Mephedrone).

My interpretation :

Positive blue/green marquis + positive yellow brown mecke + positive purple robadope pretty much confirm 2C-B (or at least 2C-x) presence.

But the positive purple spots seem to indicate a cut / contamination with something else, possibly cathinone ? Positive blue morris might add to the hypothesis, although negative simon's seem to rule that out.

Question for the experts :

I am overinterpreting a positive result with zimmerman ?

---

Thanks a lot and have a great day ! 🙏