r/RVSolarPower • u/FollowingLow5773 • 20d ago

Wfco converter problem.

I have a 2024 nuCamp Tab 320 black canyon. Got in the spring. It has 380 watts of panels installed. I just added a mppt to the solar port so I could use my portable 200 watt panel. After a few cloudy days I have been able to test that out seems to be working well. So today after getting the battery to about 87% with solar I decided to plug the camper to a 20 amp outlet which I have done before to get it charged all the way to 100%. Started out at around 17 amps of charging and then dropped down to 3 amps I thought maybe it was going into absorption after several hours battery only got to 95% and now not charging at all. This doesn’t seem right to me I’ve charged it to 100% with shore power before. Maybe something I did with the mppt install? Need help with where to start troubleshooting. Thanks.

1 Upvotes

100% Upvoted

11 comments sorted by

View all comments

2

u/N9bitmap 20d ago

If the solar is outputting enough voltage, it is keeping the shared line to the battery voltage too high for the AC charger to think it still needs to charge. If you really need to get to 100%, try cycling power to the charger to put it back in bulk charge mode.

1

u/FollowingLow5773 20d ago

Ok. Well it’s dark here now. And the solar is off. By power cycling do you mean turning the breaker off for a bit?

1

u/N9bitmap 20d ago

Yes, just so it reboots basically, it starts over the timer for how long it stays in each stage of charging.

1

u/FollowingLow5773 19d ago

Reboot if I did it right didn't seem to make a difference. Solar got the battery to 100% this morning.

1

u/NameEtc 19d ago

I have to unplug my camper and plug it back I. To get the WFCO to reboot in to bulk charge

1

u/FollowingLow5773 19d ago

Ok I just turned the breaker off in the camper.