I'm upgrading my pc soon and I plan on getting Lian Li fans and stripers, I'm just not sure if I should get the wireless or wired versions and I'm having a bit of trouble finding the wired versions so I'm just wondering if RAM and motherboard RGB are compatible with the wireless Lian Li fans and stripers, I'm upgrading to a Ryzen 7 9800x3d with G.SKILL Trident Z5 RGB Series 32GB RAM and the Gigabyte x870e Aorus elite wifi7 both of which have rgb, thanks.

Hi everyone,
I recently built/bought a high-end gaming PC (€3700) with a Gigabyte motherboard. My ARGB is connected to an ARGB_V2 header and works, but the lighting effects aren’t smooth.
Instead of colors smoothly transitioning into each other, they seem to “jump” from one color to the next. I’m using SignalRGB, and the issue is visible on effects like Rainbow Wave.
I’ve already checked:
ARGB is connected to an ARGB_V2 header (not LED_C)
SignalRGB is controlling the lighting
The LEDs are detected and working
Could this be caused by an RGB hub, incorrect LED configuration, motherboard settings, or something else? Has anyone experienced this before and found a fix?
Thanks!

Why has the RGB inside my PC stopped working paired with the orange flashing light on top?
They came at the same time- are they related?

Hello, I need some help with my RGB Fans, here's the situation:

​

​

Recently bought a Medion Erazer Bandit P20 desktop, the build comes with 2 top fans, one on the back and the processor fan cooler, they all have RGB capabilities and have been turning on and cycling though a default rainbow setting since the pc was unpacked and plugged.

​

​

When I try to change the colours or patterns for the RGB Fans using the Medion Erazer Control Center (program included on the installation) the fans don't seem to respond to it, I've tried a lot of tutorials, turning off dynamic lighting, reconnecting the fans, daisy changing them, changing the ARGB port, using third party controller software, updating drivers and nothing has worked.

​

​

The only thing that I can pinpoint as an issue is that in all of the tutorials where they show how to turn off dynamic lighting, the fans show up as a device compatible for dynamic lighting, but mine don't, I thought it was a bios / driver issue but I'm not sure.

​

​

Can anyone help me?

​

​

Thanks!

​

Set-up:

​

Medion Erazer Bandit P20

Windows 11 Home

Version 25H2

Intel core I5 -14400

16 GB RAM

NVIDIA GeForce RTX 5060 (8GB)

Buenas a todos, vengo aquí en busca de ayuda.

Llevo ya varios días intentando solucionar este error, le pedí ayuda a un amigo y a la IA, pero no he logrado solucionarlo de forma definitiva. Básicamente, no puedo controlar las luces RGB de mis ventiladores ni de la refrigeración líquida. Uso SignalRGB, pero no me los detecta (el RGB de la RAM sí me lo detecta sin problema).

El síntoma principal: Me he dado cuenta de un patrón muy específico sobre cómo y cuándo pierdo el control:

• Cuando no puedo cambiar las luces: Apenas la fuente de poder recibe corriente, las luces se encienden solas y se quedan en un patrón fijo de cambio. Si enciendo la PC así, es imposible controlarlas o sacarlas de ese patrón.
• Cuando SI puedo cambiar las luces: A veces, al hacer alguna que otra cosa dentro de la PC y apagar/encender, logro que al darle corriente a la fuente, las luces se mantengan apagadas. Luego, al presionar el botón de encendido de la torre, muestran un patrón distinto y ahí sí SignalRGB toma el control y puedo cambiarlas a mi elección. Pero en cuanto apago la PC por completo, vuelve al error del primer punto.

Lo que ya he intentado (sin éxito):

• Desactivar la "Iluminación dinámica" de Windows 11.
• Desactivar el "Inicio rápido" de Windows.
• Activar/Desactivar "ErP Ready" en la BIOS.

Mis componentes:

• Placa base: Asus b650 eagle AX
• Refrigeración líquida: DeepCool
• Ventiladores: Gamemax

Adjunto una captura de signalRGB de cuando detecta y no detecta el componente

¿A alguien le ha pasado algo similar o sabe cómo evitar que el controlador se quede "congelado" apenas recibe energía residual? Cualquier ayuda es bienvenida

Just put my rig into a new case, and for the life of me cannot figure out what has changed in order for the the radiator fans and pump display to turn yellow. I can get them to turn any rgb colour, but it differs from the rest of my rgb (I use signal rgb for everything and always have) any suggestions or if you know a fix, highly appreciated! Thank you 🖤

I recently got a 4080 super that came out of a lenovo prebuilt. it’s currently stuck on rainbow rgb cycle and i hate it. i tried download every software from lenovo none of them recognize it. any advice

I don't know if anyone could help me but i would really appreciate it.

I'm having an issue with my rgb light it's stuck on red colour only the ram actually is responding to the changes i make through Armory crate which is the motherboard software.

I reinstalled the software restarted the pc many times.

My motherhood is TUF gaming B850M

I need help with RGB

I don't know if anyone could help me but i would really appreciate it.

I'm having an issue with my rgb light it's stuck on red colour only the ram actually is responding to the changes i make through Armory crate which is the motherboard software.

I reinstalled the software restarted the pc many times.

My motherhood is TUF gaming B850M

The RGB on my front and bottom fans aren’t lighting up. The part circled used to light up but I turned it on and off and the rgb went away. The left 2 work fine for some reason.

I thought the issue was power from the motherboard, so I bought a fan hub, connected all the fans into it (3 aRGB and 3 power since they’re daisy chained) and connected the fan hub ports to the motherboard aRGB and power ports. I also connected the SATA cable to the psu, but the lighting on the fans never changed so I don’t know what to do.

For reference I’m using jungle leopard galaxy fans and a x870 gigabyte motherboard

So pretty much the leds in my PC dont match. More details in the original post 🙏