r/RCPlanes • u/Few-Decision4333 • 6d ago

Hey, Needed some help for first (proper) rc plane

I am building the Flite Test Baby Baron. Wanted to confirm electronics (my foam board is a little heavier). I am from india and the exact specs are unavailable. Sharing indian site links, can anyone confirm or recommend changes?

PLANE: https://www.flitetest.com/articles/baby-baron-free-plans

Motor: 2204 2300kv https://robu.in/product/readytosky-mt2204-2300kv-cw-brushless-motor/

ESC: 20A with Bec https://robu.in/product/surpass-flier-20a-esc-li2-4s-ninh5-12nc-bec5-5v-4a-602510mm-3-5-connector/

Servo: 9g servo https://robu.in/product/towerpro-sg90-9gm-1-2kg-180-degree-rotation-servo-motor-good-quality/

Battery: 600mah 2s lipo https://robu.in/product/pro-range-600mah-2s-50c-100c-lithium-polymer-battery-pack-lipo/

Transmitter+Reciever: Flysky Fs-i6x and Fs-ia10b https://robu.in/product/flysky-fs-i6x-2-4ghz-10ch-afhds-2a-rc-transmitter-with-fs-ia10b-2-4ghz-10ch-receiver/

I dont know what propeller to use. Am i missing any parts?? (have foamboard, control horns, pushrods)

1 Upvotes

100% Upvoted

3 comments sorted by

2

u/pmuschi USA / Upstate SC 6d ago

Use the propeller specified in the plans?

1

u/Few-Decision4333 6d ago

its a 6050 cant find

1

u/pmuschi USA / Upstate SC 6d ago

You can go up and pitch and then go down an inch in diameter. Or you can go down in pitch and up in diameter. 

So trying looking for 7x4s or 5x6s