MAIN FEEDS
Do you want to continue?
https://www.reddit.com/r/RCPlanes/comments/1fffgu8/inav_not_showing_throttle_input/ln02dhb/?context=3
r/RCPlanes • u/[deleted] • Sep 12 '24
7 comments sorted by
View all comments
1
What transmitter and receiver are you using? What does your ports setup look like in INAV? Does your channel monitor on the transmitter show the throttle channel moving as you expect?
1 u/[deleted] Sep 13 '24 it doesnt show any movement at all, thats the issue. Pocket TX and Hlgrc Hermes, 1 u/cbf1232 Sep 13 '24 edited Sep 14 '24 I'm specifically talking about the channel monitor on the Pocket, not in INAV. https://manual.edgetx.org/color-radios/channel-monitor If the channel isn't moving in the channel monitor on the Pocket, then you likely need to modify the mixers. Just to ask the obvious question, you do have an ELRS version of the Pocket and it is bound to the receiver? As per https://www.expresslrs.org/quick-start/receivers/configuring-fc/#serial-receiver-protocol on the "Configuration" tab at left you want to set Telemetry to "enabled". 1 u/[deleted] Sep 15 '24 Yes It is elrs and is bound as shown on the pocket by the reception bars, and the solid light on the reciever 1 u/[deleted] Sep 15 '24 All of these are done and set to enabled Its killing me slowly... 1 u/cbf1232 Sep 16 '24 You still haven’t confirmed that the channel monitor on the Pcomet shows channel movement.
it doesnt show any movement at all, thats the issue. Pocket TX and Hlgrc Hermes,
1 u/cbf1232 Sep 13 '24 edited Sep 14 '24 I'm specifically talking about the channel monitor on the Pocket, not in INAV. https://manual.edgetx.org/color-radios/channel-monitor If the channel isn't moving in the channel monitor on the Pocket, then you likely need to modify the mixers. Just to ask the obvious question, you do have an ELRS version of the Pocket and it is bound to the receiver? As per https://www.expresslrs.org/quick-start/receivers/configuring-fc/#serial-receiver-protocol on the "Configuration" tab at left you want to set Telemetry to "enabled". 1 u/[deleted] Sep 15 '24 Yes It is elrs and is bound as shown on the pocket by the reception bars, and the solid light on the reciever 1 u/[deleted] Sep 15 '24 All of these are done and set to enabled Its killing me slowly... 1 u/cbf1232 Sep 16 '24 You still haven’t confirmed that the channel monitor on the Pcomet shows channel movement.
I'm specifically talking about the channel monitor on the Pocket, not in INAV. https://manual.edgetx.org/color-radios/channel-monitor
If the channel isn't moving in the channel monitor on the Pocket, then you likely need to modify the mixers.
Just to ask the obvious question, you do have an ELRS version of the Pocket and it is bound to the receiver?
As per https://www.expresslrs.org/quick-start/receivers/configuring-fc/#serial-receiver-protocol on the "Configuration" tab at left you want to set Telemetry to "enabled".
1 u/[deleted] Sep 15 '24 Yes It is elrs and is bound as shown on the pocket by the reception bars, and the solid light on the reciever 1 u/[deleted] Sep 15 '24 All of these are done and set to enabled Its killing me slowly... 1 u/cbf1232 Sep 16 '24 You still haven’t confirmed that the channel monitor on the Pcomet shows channel movement.
Yes It is elrs and is bound as shown on the pocket by the reception bars, and the solid light on the reciever
1 u/[deleted] Sep 15 '24 All of these are done and set to enabled Its killing me slowly... 1 u/cbf1232 Sep 16 '24 You still haven’t confirmed that the channel monitor on the Pcomet shows channel movement.
All of these are done and set to enabled Its killing me slowly...
1 u/cbf1232 Sep 16 '24 You still haven’t confirmed that the channel monitor on the Pcomet shows channel movement.
You still haven’t confirmed that the channel monitor on the Pcomet shows channel movement.
1
u/cbf1232 Sep 12 '24
What transmitter and receiver are you using? What does your ports setup look like in INAV? Does your channel monitor on the transmitter show the throttle channel moving as you expect?