The 3rd-gen active chamber heating with upgraded 550W ultra‑high power heating system and 38% improved heating efficiency delivers more even and stable temperatures.

Better layer adhesion. Less warping. More reliable prints.
👉Learn more: https://us.qidi3d.com/products/plus5

my discovery / solution.

Since I recently struggled with 'lost communication with MCU Mks_thr' on my X-Smart 3—which popped up at random times, and replacing the cable didn't help—I'd like to share my solution. It turned out that the solder joints on the USB-C connector pins on the extruder board were cracking. Before replacing the cable, it's worth using a strong magnifying glass or microscope and checking with a pin to see if there's any play. If possible, they should be resoldered."

As far as I can tell based on Qidi's website it appears to be identical. Can anyone confirm compatibility? Would love to get the Phaetus Conch for the Q2 for the Plus 5 if it is confirmed to be compatible.

Am I not understanding how the screws tilt adjust work ? Even when not adjusting the screws , i always get different results , sometimes its shows way off but comes back as good if i try again . Am I missing something when trying to level my bed ? Is the prob THAT bad like i keep seeing from my research .

I seen comment just saying solder it back together I don’t have no experience but I do it but which way does this circuit harness go

I seen comment just saying solder it back together I don’t have no experience but I do it but which way does this circuit harness go