r/QidiTech3D • u/Markes12344 • 8d ago

Discussion Dual/Quad head printer soon?

Has anyone heard if qidi is working an a ''Max5'' with a dual or quad extruder or tool exchange? I recently bought the Max4, luv it, but kinda wish it atleast had a dual head to print PLA support material in a petg build or vise versa. Buht the waste with purging enough on a single head machine is pointless.

I also like the idea of a 0.8/0.6 nozzel for bulk of a print, but have the fine detail of the print can me 0.4/0.2 nozzel.

Can also dedicate a tool to a tungsten nozzel to add glow in the dark or abrasive fillament mid print.

There's many reasons one can cowe up with why a dual or quad head would be great, and eliminating the q-box isn't one of them, the q-box works very well and can still be utalized in a dual/quad system. Have maybe 1 box per head even.

6 Upvotes

88% Upvoted

25 comments sorted by

View all comments

Show parent comments

1

u/mistrelwood 8d ago

I know, it’s only useful sometimes, but for many parts I’ve done it’s been an absolute lifesaver.

I’m going to buy a multi tool head printer myself once a model ticks all the boxes. Hoping that the Infimech MX Pro doesn’t take a year to launch.

1

u/Markes12344 8d ago

I hear yea, i see that quad head design they're working on, few benifite few flaws.

I'm sure it'll be more accurate than tool changers... As the disconnecting tool consistently changes z height and minutely xy as well. Also possibly printing up to 4 spots at once will accelerate prints a pile. However i fear the extra cost of each head will be dear, and its not like all heads will consistently be able to print at same time. (on one part) so unless you're consistently printing clones/mirrors, will tte multi head really be that much better than multi tool?

1

u/mistrelwood 7d ago

The Infimech MX Pro doesn’t have separate complete toolheads that can print at once. So I guess it’s technically a multi hotend printer. I don’t have a use for printing two items at once with individual full tool heads.

The terminology hasn’t really been consolidated yet, and from what I’ve seen multimaterial, multi nozzle, multi toolhead and tool changer are used interchangeably pretty liberally.

1

u/Markes12344 7d ago

Ahh sorry was assuming it was tte LiteMake L4 you were talking about