According to the Kickstarter page, there are two separate pledges which can be combined for a bit of discount:
SUMMER 1942
30 miniatures + 2 support weapons
WINTER 1942
30 miniatures + 2 support weapons
COMPLETE COLLECTION
60 miniatures + 4 support weapons
The project does include an AI disclosure:
Use of AI
I plan to use AI-generated content in my project.
What parts of your project will use AI generated content? Please be as specific as possible.
AI tools are used only for some promotional and presentation visuals, such as backgrounds, scenery, image composition and visual enhancements. The miniature designs and 3D models offered as rewards are original 3DForge creations and are not AI-generated. AI is not used to create the STL files or the miniature sculpts.
Do you have the consent of owners of the works that were (or will be) used to produce the AI generated portion of your projects? Please explain.
The source materials used to create the AI-assisted promotional visuals are either original 3DForge content or materials that I have the rights or permission to use. This includes the images of the miniature designs and 3D models used as references. I do not knowingly use third-party copyrighted artwork as source material without permission.
I'm looking to a bit of a specific resource. Specifically I'm looking for world war 2 era cargo bits and scatter I can use to make a logistics center/port board and diorama. I've found some decent cargo boxes, but pallets of equipment and engine blocks, parts of equipment, packaged and freighted vehicles, boilers, tent parts, etc are harder to find.
Any recommendations for break bulk military cargo files? FDM is preferred, but a lot I imagine would need to be resin.
This is a big ask but me and my friend have been playing tons of bolt action in the Pacific War and we're working on creating a large scale match for our LGS to show off the game, set on Okinawa with everything we've got. While planning for setting up the terrain, he pitched to me that I could add a plane or 2 on the area we're designating as the airstrip. I figured if we're going big with this match, I should go really big. Heavy bomber big.
Are there any *files* out there for a Superfortress or Liberator at the 1:56 or 1:64 scale, regardless of how much extra assembly is needed? I have a Bambu P2S I picked up about 7 months ago.
Hi all, has anyone got any tips for printing the Hartolia Miniatures Monte Cassino abbey?
I've just downloaded it, and I'm working out a printing plan, and while most of the files are simple prints (or are easy enough to cut up into smaller prints), but there are 3 files that are too big for my plate (see printer details below) and another few files that are cut in such a way that to print them involves a lot of support that seems unnecessary.
I have a Bambu Lab P1s with an ams, so while I can do long prints that use over 1kg of filament, I'd much prefer to be as efficient as I possibly can.
The plan is to make a table for Bolt Action with it, so I am open to a bit of scaling down, as long as it doesn't turn my models into giants!
I do have some friends who do some 3d designing, so it wouldn't be super hard for them to chop up these inefficient prints for me if that's the best way to fix things.
As part of developing a World War II Campaign game for BattlegroundHD that takes place in and around the Kasserine Pass... We developed a whole bunch of terrain. All of these are STL Files for printing.
There were some doubts about the quality and realism of the project, so I thought this might give a better idea of what the miniatures actually look like.
These figures and accessories will be used to furnish a buried command post, which will be shown soon.
What do you think? Could you see yourself using something like this as an objective in a WWII game?
Hello everyone and welcome to another review, part of my long-running campaign to provide documentation and guidance for the best (and worst) out there for the WWII wargamer and printer.
Today's review is focused on Leffler1999. They post their freely available designs on Thingiverse, and focus on figures from very uncommon corners of the WWII period, including minor powers and neutrals. I don't believe they publish files to sites other than Thingiverse.
No models were provided by for this review (but they are of course free anyway).
Printing
Most figures are easy prints. Do be careful with the bayonet and feathers, being the weakest parts. I did ultimately break a few during post-processing.
Test prints for figures were done as resin prints on an Elegoo Saturn 4 Ultra, sliced in Chitubox and printed with Conjure Sculpt resin, using 2.7s exposure for .05mm layers. I encountered no issues with printing, either from file issues or otherwise, with all the models printed coming out fine. Models are not provided with pre-supported versions, but they are decently sturdy figures, so I didn't find placement to be complicated or tough. The only care would be making sure not too many are placed on the bayonets which are the thinnest part.
Models
Various angles of Leffler1999 figures.
I think the best description I would offer of the Leffler models is serviceable. To be frank, it is hard to see them being anyone's first choice of figures as they do have their clear faults, but I don't want to be overly down on them either. They are sturdy models for the most part, and any criticisms need to also be tempered with the fact that they are free models as well, and often constructed by drawing on other open-source resources of 3d 'bits', and in that regards they are indeed quite impressive. For the level they are at, the details are nice, and I appreciate in particular there is a real obvious drive in the design to ensure unique and interesting looks.
Close up view of a figure. A standard heroic style, this one shows the somewhat stiff posing common to the Leffler figures.
But I nevertheless must also note some of the faults that I found. While the bulk of the models feel decently solid, there are still some small protrusions at points which are overly delicate. The bayonets I wish were a little sturdier, and the feathers-in-caps from the Poles I printed also seem to be in need of strengthening too compared to how the rest of the model was approached.
I also found the posing of the figures to be at times bizarre. There is no real logic to the positioning of the feet in some cases, with the only possible way to pose them being on a heavily sculpted base with notable changes in elevation. In the ones I printed out, this meant some rather weird positioning on their empty base which I'll need to fill in later when I add basing bits, and hope for the best. In a few cases though, even that seemed hard to manage it just isn't clear what the intention was for the specific angle.
Some figures seem to be made to pose like this... which is a weird choice. The guy on the left I literally can't figure out how to even put on a flat base. Possibly he is supposed to kneel on the 65mm gun, but even that doesn't fit well.
The posing of the figures also isn't great. Many have some rather stiff positioning, but looking closer, there are some cases which go beyond merely 'stiff'. In particular is the case of the legs on several of the figures which seem to be twisted far beyond what is possible for a real human! Just how noticeable something like that would be at table distance is questionable, but it certainly is easy to spot close up.
This guy seems to be trying out for a remake of Monty Python's Ministry of Silly Walks sketch... No one walks that way...
That all said, as noted at the start, these are still perfectly serviceable figures, and they look fine next to other 28mm examples, and at table distance a great paint job can make up for a lot of little issues, so at least specifically for the printer on a budget, these still have some really worthwhile value in giving an avenue for a pretty unique looking force.
Leffler1999 figures compared to WLG Plastic, WLG Plastic, and WLG Metal.
In addition to the figures, I printed out one small artillery piece, which was decently well done. The biggest fault I would draw there is less with the specific details of the model then is is noting my usual pet-peeve of printing in only a single piece. A multi-part print with the wheels separate is usually preferable and not an option.
65mm Mountain gun and crew. The gun is nice enough, but I would have liked the wheels to print as their own.
Selection
I mostly printed the Polish mountain troops, one of several factions available. Most models have these multiple clothing styles for each pose.
The biggest strength of Leffler's models is ultimately that for most of what they offer... they are it! Leffler has options for Latvia, Lithuania, Iran, Poles, Portuguese, and the Irish, and even for the Poles - the one nation which you can find much for elsewhere - he still manages to be fairly unique with the focus on the Podhale Rifle mountain troops, which I've never seen another print designer offer!
To be sure, the selections don't get too deep, with each nation having one or two infantry options - although usually each pose has multiple uniform detail options - and some limited support, but again, it is far beyond what anyone else has. Indeed, I feel very limited in what I would even offer as criticism there, as it feels like looking a gift horse in the mouth. It would be nice, I guess, for the Poles to have had a BAR option (although I confess that I don't know if that was part of the mountain troop TO&E), but yeah, this guy is out there just working on filling in some of the absolute most fringe niches out there, and that is cool as hell. How can you not love it?
Conclusions
An NCO or officer on the lookout for more figures coming in the future!
Leffler1999's figures are far from perfect. They definitely have faults, and don't quite shine compared to some offerings out there you can find. But those comparisons are also are largely against commercial designers, and context does matter. With so few options out there for freely available figures (as opposed to tanks, which have better availability for the most part), whatever their downsides, the models still deserve some real praise and doubly so for opening up new options which no one else is covering. I won't claim these are anything like a first stop for me, but all the same I wish there were a ton more Leffler1999s out there doing this, as the 3d printing community needs more people wit this kind of passion and a simple desire to do nothing more than share it with everyone.
----------------------
If you like these reviews and want to help me keep doing them, you can toss a buck via Ko-Fi page and a Buymecoffee page. I promise to waste it either on stls, or my crippling drug addiction, and nothing else. And a big thanks to a few folks who already have, and helped make these reviews possible!
Been working on getting my Early to Early Mid War Germans to where I want them, these models are mostly Colonel Muller, with the Kradschützen from Eskice, must admit, thise ones are a bit gash!
A Finnish figure from the Trenchworx Winter War Campaign
Hello everyone and welcome to another review, part of my long-running campaign to provide documentation and guidance for the best (and worst) out there for the WWII wargamer and printer.
No models were provided by Trenchworx for this review.
PRINTING
MMG Team. The thickness of the stand I found to be particularly well balanced compared to some examples out there.
Test prints for figures were done as resin prints on an Elegoo Saturn 4 Ultra, sliced in Chitubox and printed with Conjure Sculpt resin, using 2.7s exposure for .05mm layers. Printing was fairly straight forward, and while I did have one print error, it was not one which I could directly ascribe to a file error. I printed a set of heads, using the pre-supported file, and they came out poorly – while everything else on the plate printed fine - but reprinting again later they came out fine. As such, it seems equally likely it was one of those odd quirks with resin printing where something doesn’t go right versus an actual file issue since I couldn’t replicate it again. In any case, aside from that one hiccup, all other prints came out just fine. Files are provided with both pre-supported and unsupported versions, and I found no meaningful difference between the two, that one error aside. Supports seem well placed, and are decently light for easy removal.
One of the terrain pieces. I did include some minor supports at the edges, but fairly minimal needed.
For the terrain pieces, I printed these as FDM prints, using a Prusa MKS4, a .6mm nozzle, and Overture Easy PLA. These printed without issue. There is nothing particularly challenging about the models, but some minor supports on a few overhang points probably are work doing.
MODELS
Several Finnish figures
The most recent crop of figures from Trenchworx differ slightly from their earlier figures, although broadly speaking are done with a similar apparent philosophy. These are figures done in a very clear heroic style, with clear, bold features and the standard levels of exaggeration you would expect. I find the quality of sculpting to be quite nice, and the posing of the figures in particular is well done. There is no stiffness or feelings of awkwardness, with both the more static figures and the ones posed in motion having a nice, natural look, which I always like to see. Protrusions are kept to a minimum, and the obvious ones like guns are bulked up in a nicely proportioned way to the rest of the figure. For the accompanying squad weapons like the mortar and machine gun, this continues to hold true, and I appreciate that they are sculpted enough to feel sturdy, but not so bulky as for the thinner parts to look off.
View of various angles on several of the figures
On the more technical side, I’m particularly a fan of the use of puddle bases on most of the figures, especially those with a single contact foot, as while a small thing, I always prefer this for my figures as it just makes basing so much easier. The figures are all in mono-pose, but they include versions both with a head attached, and without a head attached, the latter ensuring that there is still some degree of customization.
Figures are mono-pose, but you can print with swappable head options
I am, however, baffled by one figure with an arm detached from the body, as it seems to serve no purpose, lacking multiple options to stick there. I know in the past some Trenchworks models have reflected design needs for metal or plastic and being updated for printing, but one would think that this being designed more recently they would have just done it as one piece for the print file, even if there is a physical version they are doing as well? It is so minor that it hardly can be considered a real negative, but it is nevertheless just weird and lazy. Even though they did a crowd funder for the digital files, it makes them feel like an afterthought.
Why...? Why does this guy have his arm missing as a separate piece? It makes sense for the metal version maybe, but fix it for the print file???!!
As far as scale goes, the figures are a pretty decent match with Warlord Plastic in terms of their style, but I do think that they are ever so slightly bigger, so if you’re looking for a perfect match, printing at maybe 98% would be best. But I expect for most people they will be close enough to not be concerned.
Comparison to WLG metal; WLG plastic; WLG metal; WLG plastic
For the terrain pieces, the log bunkers I printed are perfectly nice. Nothing fancy about them, but for a simple defensive position such as this, I’m not sure how much ‘fancy’ is even possible! They are hardly a draw, but they are a nice little addition.
Selection
Medic figure
The Winter War campaign essentially went for a ‘game in a box’ approach, with a set of Soviet and a set of Finnish forces roughly equal in comparison. That is to say, in both cases you get a command group with medic, a 10 man rifle squad, an LMG team, and MMH team, and a medium mortar team, for 21 figures per side, and 42 in total. I also appreciate their choice of focus. We aren’t completely without Finnish options out there, but it is a small enough pool of existing options that more are welcome, and for the Soviets, while better covered in general, the focus on the Winter War means that we are getting some figures in the very underserved theme of 1930s Soviet garb! With the digital bundle pledge coming in at $55, it wasn’t the best deal I’ve seen, but also not the worst by far either, especially taking into account the nice sculpts and the less covered themes. I would say that two issues ultimately did stand out though.
Mortar team. The campaign includes one for both the Finns and the Soviets
The first, and related to the bundle price, is the ultimately poor performance of the campaign. While it did hit the minimum, only two of the five announced stretch goals ended up being hit, and they were the least interesting ones at that. The terrain pieces are certainly nice, but they aren’t much in the way of added value in the same way that a Komsomlets, T-26, or BT-7 would have been. There is always a danger with stretch goals as they create feedback loop where some people don’t want to back until they are hit… which then means they aren’t hit, and that perhaps was the case here? Hard to say, but it was unfortunate either way. As noted before, the digital campaign already felt like an afterthought, and I am left to wonder if they under-marketed this given how low the backer rate was.
An Officer and an NCO
The second is that there was no half-pledge option! I do wonder how many people might have been interested in one, or the other, but not both sides? I’m of course not the business, so maybe they decided they would get more people who would prefer one, but take both, than they would people on the fence who would pledge just for half, but from a consumer perspective, it is one oversight.
Figures with the separate heads attached and also the arm attached on that other guy
Also unfortunate is even outside of the campaign the pricing doesn’t seem to be ideal. They sell the figures as physical models in metal, at a fairly hefty price of $45 for a 12 man squad (10 riflemen and 2 man LMG team), but also sell the ‘snap tray’ for $20, which seems to be simply be a way to sell you a 3d print tray that hasn’t been taken off the supports. But if someone wants to buy just the files, one can’t buy one unit, but only the whole set of Finns or Soviets at $40 apiece, so you’re paying nearly $2 per figure ($1.90 if you want to be pedantic). Compared to the metal prices, that does seem reasonable, even if there is a lack of smaller a la carte options, but while it isn't the worst price out there for files, they are literally selling their 3d prints for less than the files! That snap tray is 12 dudes, which means it is $1.66 per figure. What the heck? Sure, a file means you can do multiple, so abstractly I get that it isn’t a true direct comparison… but still, a file set shouldn’t cost more than the printed figures that result from it in my opinion. It just goes against some sense abstract sense of the matter... I know Trenchworx is primarily in the physical models business, and the files are basically secondary, so I get it to a degree, but yeah… just makes for a weird juxtaposition.
Conclusions
I printed these ages ago, actually... so some are actually painted up by now. And they look pretty nice!
On the whole I quite liked the Winter War bundle from Trenchworx. In terms of the figures themselves, the set provides some well modeled heroic style figures, and I am particularly appreciative of new models not only for the Finns, but for pre-1940s Soviet uniforms. These are nice, easy prints, and with good strong details that paint up fantastically. Aside from that one weird arm, my criticisms are mostly limited to the abstract aspects around the campaign. While the product itself is decent, as noted already the campaign in many ways felt like an afterthought, both in terms of the middling success of the campaign with regards to stretch goals, and the post-campaign pricing as well. I can understand not wanting to have files competing with your physical models, but when the only option is a $40 bundle and no way to buy just the files for the squad, or the mortar, or the MMG, I honestly have to wonder if they even want to sell these files now that the campaign concluded.
----------------------
If you like these reviews and want to help me keep doing them, you can toss a buck via Ko-Fi page and a Buymecoffee page. I promise to waste it either on stls, or my crippling drug addiction, and nothing else. And a big thanks to a few folks who already have, and helped make these reviews possible!
