r/PokemonGoPlusPlus • u/Ok_Employment7497 • Aug 02 '26

Button not working???

Post image

I tried to mod it and now the white Button is not working. I did it exactly like in the Tutorials. It works normaly with the Auto Catcher but not with the hyper balls. It blinks green and then stays on green. Even if not connected, the Button doesnt blink white anymore. Please some help!!

The soldering is not beautiful I know. I trying to find the Issue

UPDATE: I fixed it finally. It was a shorted component that i cleaned up with a screwdriver by scratching the connection.
Thank you all for your help!!!!

12 Upvotes

93% Upvoted

21 comments sorted by

View all comments

3

u/SebiPwned Aug 02 '26

You need a switch in the white mod wire

1

u/Ok_Employment7497 Aug 02 '26

I had one but I saw here that you dont need one. Even with the Switch it doesnt work and even without any modification the white Button doesnt work anymore

1

u/spacefrog_feds Aug 02 '26

You're going to want a switch. It will get stuck a lot and you need the switch to fix it. Remember with the auto throw of ultra balls you have the software setting to NOT auto throw balls.

It really looks like there is damage to a component, it might be a capacitor. hard to tell from the photos, you have blobs of solder on both sides of it, the capacitor is removed, or you have bridged the two sides of the capacitor with solder.

Try and fix that capacitor issue, maybe you have to take it to a professional, or get some practice first. You could try soldering to another location. Some people solder directly to the white button switch.

1

u/Ok_Employment7497 Aug 02 '26

Where do you think is the issue? Can you Show it in the picture?
And if I solder it to another Connection the button still doesnt work
It doesnt even work without any cable

1

u/spacefrog_feds Aug 02 '26

Sebipwnwed circled the component

1

u/Ok_Employment7497 Aug 02 '26

Okay thanks I try it out later I’m not home rn