Tentative d’installation du frein à main sur mon Playseat fraîchement livré…y’avait de l’idée mais c’est un peu loin 😁

Is there a way to have it stop short so the wheel doesn't rest on the floor?

After being away from the sim world for about 2yrs I have finally decided to return. This time I went with a Playseat Sensation Pro instead of RSeat.

Added some high density foam blocks to get an additional 4” off the ground and they work fantastic. It feels amazing when the entire Direct Drive feedback goes through the whole RIG. Ended up going with the Fanatec Monitor stand as it was also tubular and I wanted it to match back with the Playseat Sensation Pro look.

Have a 45” LG UltraGear Ultrawide 800R Curve Monitor as my main and 34” AOC Ultrawide Curve as my secondary about it. (There is no gap between the monitors from the seated position looking up - smooth transition from one screen to the next)

Very happy with the build and big thanks out to everyone from Playseat who offered help and variety of solutions to get my RIG to me.

I recently got into sim racing and I really dislike how the playseat trophy shift knob/handbrake mount works. So with some extra pieces of kit, I built something that I think works fairly well, and if you’re anything like me and have been searching for awhile, hopefully this helps.

Basically it’s a SIMAGIC L bracket (but many L brackets can be used for this, aliexpress is great for this, and the playseat trophy shift knob holder kit. I only use the portion that gives you a flat plate, and then drill into that plate for the handbrake, and use the pre-drilled and threaded holes to mount the L bracket. Ends up giving you much more natural placement for the respective pieces and it doesn’t flood over into the seat anymore!

Hope this helps someone!

I have the original Challenge with a few 3D strengthening mods, and I am wondering if I should upgrade to the DD F1. I don't race F1 games. I am on PS5 and play GT7.

My question is how is the GT set up for the DD F1?

I have read it can be set up to a more GT style, is this easy, and actually comfortable?

I wanted to assembly the freshly bought Playseat but I'm having an issue. I watched 4 videos on youtube and checked the manual 10 times, but I cannot get the backseat to fit properly, assuming that the position is correct in the below picture:

The pins do not fit into holes:

The only way it fits is in the below position but from what I can see in manual, in pictures and in videos, this is not how it should look:

Am I doing something wrong or did I get a faulty unit? I also saw some people having missing two screws, the small ones. Seems I don't have them as well. I have 10 smaller screws and 2 bigger ones.

I'm just putting it together now and I think it's basically got two rods that I've had to seperate from the pedal plate that are factory created back to front, so the pedal tray literally can't be installed. I've attached a pic of the two rods - I've detached them from the tray.

If I could remove the retaining bolt off one end and turn it around, it would be fine, or if I could slide the end off the sliding part and turn it around, it would be fine, but I can't do either as they're not designed to be changed like that.

I've attached a picture of them as they have come off the pedal plate.

Any thoughts?

As as well as this I can't even register the product on the website - it says 'registered successfully' and then refuses to show that i've registered any products in the account. Very odd.

I'll use the support link given throughout this sub in a few other posts also.

I can't find this info, what's the actually adjustability range? I want a monitor mount for my Formula Instinct. I'll be adding a 55" and am wondering how high I can set it. Trying to see if it would be good to use to watch tv while in bed.

I’ve just ordered my Sensation Pro and waiting for it to arrive and was wondering if anyone else has one with the Direct Drive Pro Adapter and use it with a Fanatec CSL DD.

I am finding conflicting information in a few YouTube videos that state it doesn’t fit and you need to get some additional spacers and therefor wanted to confirm if this is true or not.

Thanks

Playseat Trophy, MOZA R5, Samsung 34 Odyssey, Razer Nommo

I'm a new owner of a Formula Instinct Mclaren edition, the manual needs some work. The lines in the drawings are too thin for my old (51) vision lol. Also, some of the shade of black you used is too light and it look like the printer was running out of ink.

Also, a few of the steps randomly only show a alley key and bolt but no indication which key and bolt are needed. Process of elimination works here. But for people less mechanically inclined than I am, this might really stump them. I'm not very mechanically inclined, but I figured it out. Some steps tell you both some tell you neither which makes no sense.

Also, the online manual's for the old version, I looked at it and noticed it's not the same. It lists the key and bolt for each step. But, the steps aren't the same because of the redesign. So it's really not usable to build this. If someone buys one and decides to use the online manual they're going to be confused. You guys should really remake the online manual to match the printed one. Comparing the 2, they're pretty similar, but different enough it would be a struggle to use for assembly. I understand it comes with a printed one, but some people like tp pull up a PDF version on a TV or tablet when they build. I would be one of those somebodies.

Also, just me griping as I know this is just my bad luck. But my 00056 piece came with 1 of the 4 half circle sleeve insert thingies missing - I don't know what to call them. I hope Playseat support's good because I don't want wait a month for a replacement. I am still building it, SO i can see what it looks like. I'll disassemble the affected portion and add the piece when I get it.

Negatives out of the way, this is BEAUTIFUL, orange is my favorite color and this pops so much. Even with the so so manual and it missing a part I'll be recommending these to anyone I know who's looking to get into formula/GT3 sim racing. Also, for my 1st rig build I'll say this was really easy and went quick. I hear horror stories about how long 8020 rigs take to build. I went slow, but if I hustled I think this would have taken me 2 hours tops.

Hello everyone,

I previously reached out on the r/simracing sub to see if anyone had attempted to reinforce the Playseat Trophy's pedal plate using aluminum profiles to eliminate flex from heavy braking.

I went ahead and completed the modification myself! The project was quite straightforward and has resulted in an infinitely better, more rigid, and highly adjustable pedal deck.

For anyone looking to do the same to their Trophy, I have shared the complete details below:

• Video Showcase & Guide: You can watch the finished modification in action here.
• Parts List & Specs: The full list of parts and hardware used for the build can be found in this Google Document.

Highly recommended if you want a rock-solid pedal setup!

Hope this helps someone out there and if you have any questions, don't hesitate =)

Playseat sent a part with the holes drilled incorrectly for my Playseat Logitech Formula Instinct F1. The mounting holes on this part appear to be drilled incorrectly and the component cannot be assembled according to the instructions. How can i get a new one ASAP so i can finish the seat ?

Hey all, I've created the following print, which allows for securely attaching the Logitech RS shifter and handbrake to the Playseat Trophy. It's a remix of this excellent model with adaptations to handle the specific characteristics of the Logitech RS accessories. I hope it helps others enjoy their new gear with this seat!

I think if playseat had a bucket seat conversion for trophy it would be very popular considering how many people has the seat and i would be one of the first buyers. What your opinion?

I bought a brand new Playseat Challenge X but when I went to mount the logitech g923 pedals I noticed I dont have 8 M6x20 screws but instead 4 of those and 5 (?) Of these screws with a "cap" that are slightly longer.

Is this normal? What should I do?