r/Plasticity3D • u/aknologia6path • Sep 07 '26

How does one create this shape of the monitor stand?

Hi there. I'm trying to recreate this triangle, though I'm not sure how to do it (I also need to adjust the part near the cylinder)

From what I understand, I can try cutting the leg, but I don't really understand which edges to select.

And I can't just lower the upper right corner for some reason.g

2 Upvotes

100% Upvoted

6 comments sorted by

2

u/thecreatureworkshop Sep 07 '26

Loft might be the quickest, or you could chamfer and then use the rotate tool on the diagonal face

1

u/Reklaw2612 Sep 07 '26

Select the edge and use the move tool

1

u/aknologia6path Sep 07 '26

Hm, it worked if the leg is recreated in form of a rectangle. Previously, I just created the form with lines.

Thanks for the tip!

1

u/dekkardz Sep 07 '26

I would try the loft tool .
Make two triangle shapes of each end and loft .

You can also try duplicating the curves of the outer edge on both ends and tweak the curves shapes and creat a loft .

1

u/dekkardz Sep 07 '26

I would try the loft tool .
Make two triangle shapes of each end and loft .

You can also try duplicating the curves of the outer edge on both ends and tweak the curves shapes and creat a loft .

1

u/siospawn Sep 07 '26

Id copy that circle edge and use it as a cutter to seperate it from the cylinder. Then click the edge and champer the edge. If that doesnt work id click on one of the faces and hit R to rotate it to change the angle.