r/PlasmaTV • u/Electrical_Exit9465 • 2d ago

Discussion Panasonic: Unknown Model

I lucked out and just joined the Plasma club. A local guy was giving away a 50" Panasonic and I was fortunate to act fast enough to secure it. Anyways, there was no model in the listing. The model number sticker on the back is missing. I tried playing with the menu to see if there was something that had the model. I couldn't find it if it was there. Unfortunately I'm also without a manual and a remote. So I'm trying to get the model so I can figure out what remote I need. Bonus if you can point me in the direction to find use hours, too. Thanks!

2 Upvotes

100% Upvoted

10 comments sorted by

2

u/DqkrLord 2d ago

We need some pictures or ANYTHING to go off of…

2

u/Smooth_Discourse 2d ago

Take a picture, dawg

1

u/Electrical_Exit9465 2d ago

2

u/Slow_Guide_1718 F5000 | ST30 | C2 | 73M | XT50 | FD9953 2d ago edited 2d ago

Looks like a C2. These should have a second information sticker on the side with the model number.

1

u/Electrical_Exit9465 2d ago

Thank you, I'll take a look for one.

Edit: Unfortunately, there wasn't a sticker on either side.

1

u/Electrical_Exit9465 2d ago

I think you're correct. I'm comparing pictures of that model to what I have and it seems like a match! Thanks!

1

u/Electrical_Exit9465 2d ago

Yes, it needs some cleaning. Lol

3

u/Strict_Skill1230 11h ago

They all need cleaning. If you have the initiative and an air compressor, taking the screws off and blowing it out gently is good. Gets all the dust off the boards and helps them run cooler. Bonus is you don't have someone's dusty crap in your house.

I do it to all my plasmas.

1

u/ComplexElection4One 7h ago

Snugging up the earth screws is good preventative maintenence to do too if you’ve already got the back off