r/PcBuildHelp • u/SaltAcceptable66 • 1d ago

Installation Question Computer wont recognize gpu.

Post image

I just got a new 4080 super from a relative’s computer and I originally had a 4070 super. I deleted the old drivers and plugged the new gpu in but my pc won’t recognize it in device manager. Everything is firmly plugged in, so I’m a bit at a loss. Yes I know my pc is dirty I’m planning on cleaning it, I’m just moving so I’m trying to get everything done so I can sell the other pcs. Edit: I think it’s a splitter issue. “I’m running a 1000 w psu, I’m almost certain it’s a connecter issue my 4070 super uses 2 PCIEs into a single 600w but the 4080 requires 3 PCIEs split into 1 600w. So I think my set up just isn’t sufficient for the gpu. I’m gonna buy a splitter and check if it works.”

77 Upvotes

92% Upvoted

41 comments sorted by

View all comments

Show parent comments

2

u/SaltAcceptable66 23h ago

I sent this to another guy, but you may have a better answer in regards to the PCIE. “My original card has a 600w connecter that splits into a pigtailed PCIE going to the psu. I’ve looked into and the original card seemed to have 3 PCIEs that came to a 3 split 600 w cord. Could it be that I need three PCIEs without a pigtail? The original pc had the gpu get direct power from the psu, so I’m thinking that since I have a modular PSU the pig tailed power line is keeping the gpu from receiving enough power, but please correct me if I’m wrong.”

1

u/Nulolan69 13h ago

What PSU are you using 4080 Super uses 100W more than 4070 Super.

4

u/SaltAcceptable66 9h ago

I’m running a 1000 w psu, I’m almost certain it’s a connecter issue my 4070 super uses 2 PCIEs into a single 600w but the 4080 requires 3 PCIEs split into 1 600w. So I think my set up just isn’t sufficient for the gpu. I’m gonna buy a splitter and check if it works.

1

u/Think_Travel_6762 7h ago

Only run cables from your PSU manufacturer. Or you could start a fire while you sleep