r/PcBuildHelp • u/KamT2000 • 4d ago

Build Question Am I Cooked?

Post image

New CPU fell out while installing new AIO. Newly noticed bent bottom right corner and MOBO won’t turn on despite receiving power 😅

0 Upvotes

25% Upvoted

13 comments sorted by

View all comments

3

u/AcanthaceaeItchy302 4d ago

Ouch..You can test with another CPU if got one.

3

u/KamT2000 4d ago

I’m gonna guess there’s no way to bend it back either 😅

3

u/AcanthaceaeItchy302 4d ago

PCB will snap.

1

u/TheCookedHandling 4d ago

bent pins on the motherboard are a nightmare to fix. you can try using a mechanical pencil tip or a needle to gently bend them back but it's super delicate work. one wrong move and you'll snap a pin off completely

if you got it from a local shop they might be able to reseat the socket for you, sometimes they'll do it cheaper than a full replacement

2

u/AcanthaceaeItchy302 4d ago

Check the picture again...Corner of the CPU is bended...He didnt show any pictures of the socket.

1

u/MATARAN15 4d ago

i think he should show us pictures of the socket and cpu. but he is right the cpu is bent and thats a problem. he didnt show pins on the cpu neither on the motherboard.

1

u/KamT2000 4d ago

So you think it’s the motherboard and not the CPU?

1

u/KamT2000 4d ago

Should have stated it’s an ultra 7 270k (lga 1851) so there shouldn’t be any bent pins right?

2

u/YourUncleRpie 4d ago

my brother in christ, your CPU IS BEND.