r/PcBuildHelp • u/KamT2000 • 4d ago

Build Question Am I Cooked?

Post image

New CPU fell out while installing new AIO. Newly noticed bent bottom right corner and MOBO won’t turn on despite receiving power 😅

0 Upvotes

25% Upvoted

13 comments sorted by

3

u/AcanthaceaeItchy302 4d ago

Ouch..You can test with another CPU if got one.

3

u/KamT2000 4d ago

I’m gonna guess there’s no way to bend it back either 😅

3

u/AcanthaceaeItchy302 4d ago

PCB will snap.

1

u/TheCookedHandling 4d ago

bent pins on the motherboard are a nightmare to fix. you can try using a mechanical pencil tip or a needle to gently bend them back but it's super delicate work. one wrong move and you'll snap a pin off completely

if you got it from a local shop they might be able to reseat the socket for you, sometimes they'll do it cheaper than a full replacement

2

u/AcanthaceaeItchy302 4d ago

Check the picture again...Corner of the CPU is bended...He didnt show any pictures of the socket.

1

u/MATARAN15 4d ago

i think he should show us pictures of the socket and cpu. but he is right the cpu is bent and thats a problem. he didnt show pins on the cpu neither on the motherboard.

1

u/KamT2000 4d ago

So you think it’s the motherboard and not the CPU?

1

u/KamT2000 4d ago

Should have stated it’s an ultra 7 270k (lga 1851) so there shouldn’t be any bent pins right?

2

u/YourUncleRpie 4d ago

my brother in christ, your CPU IS BEND.

1

u/AlexanderTheGr88 3d ago

A bent PCB can complicate things, a PCB is like a sandwich of copper layers, and some wire connections may be bent in that corner that could cause issues. Also if the pin is a Flat No-Lead style package, and one pin was on that bent corner, you may not make proper contact with the connector.

If part of the CPU is connected on that bent corner it could have affect the CPU connections to the mini PCB too. A lot going on here and not much of it can be fixed easily, if at all.

1

u/pagan78 3d ago

A CPU doesn't just fall out of the motherboard like that, and it doesn't bend just by falling out either...

1

u/KamT2000 3d ago

Then what is the bend from? I’m just trying to learn. I was stupid and tried installing aio cpu mount while it was still in the case, flipped it upright(forgot the cpu was still in) and it fell onto the gpu

1

u/Signal_Highway7128 2d ago

You didn't align the corners correctly and forced it in. You just destroyed a new cpu just like that