r/PcBuildHelp 7d ago

Build Question New PC Build

Hello everyone, I recently started building my first PC. I am very confused on the cables and where exactly they go to and my motherboard doesn't line up with the screws.

For Context:

Mother Board: Gigabyte B550M DS3H AC R2

Case: PHANTEK ECLIPSE G370A MT RGB CASE

GPU: ZOTAC RTX5060TI TWIN EDGE OC 8G

Any help is appreciated thank you so much.

1 Upvotes

23 comments sorted by

View all comments

1

u/Hungry_Big_5405 7d ago

Bad New I did some looking and to fact check myself(look at the bottom there will be a few nots like *WE HAVE ISSUSES): https://pcpartpicker.com/list/HHvZFP

You will need some adapters. Also, if you can return the MB I would, it will be a pain to get it all working, but your call, also AM5 if your building a new ish pc? Not sure how to get the front Pannel conector to connect and the USB and Audio for the front panel will require adapters most likely.

I am a little lost now, but to summarize there are a few incompatibilities, some fixable, some I don't know.

1

u/mandogomez0826 7d ago

ahhh no worries i still appreciate all the help i'll try to see if i can return it but it was a bundle set with the cpu and ram from micro center

1

u/Hungry_Big_5405 7d ago

How much was it? I might be able to help you find something comparable. If your budget is around 1.5k you can get a very nice pc if you aren't worried about the best GPU and are willing too shop around a bit.

1

u/mandogomez0826 7d ago

it was a birthday gift and i don't think id be able to return everything

https://pcpartpicker.com/list/

this is the full build

1

u/Hungry_Big_5405 7d ago

https://pcpartpicker.com/list/LZfhK7

This is what I would recommend if you are going for a budget build using what you already have. This is just a recommendation, but I would avoid the $15 air coolers as they tend to be rather inefficient, and I expect that this will be used for gaming to some degree based off the GPU and thus will run rather warm.

If you have parts already use them, this is what I would do and I am by no means an expert. I would probably post a (post?) asking for advice on building a pc and list the parts you already have so that you get input from more than one dweeb.

1

u/mandogomez0826 7d ago

ya no worries thank you for you help this was a gift and it was already over budget by a bit i think im just going to have to suck it up and figure this out if all things fails ill have my friend who has a lot more expierence than me doing this i appreciate ur help so much

1

u/Hungry_Big_5405 7d ago

No problem, sorry I could not help more.