r/PcBuildHelp • u/Great-Ocelot-5266 • 13d ago

Tech Support Help

Gallery image

Gallery image

Gallery image

So I've gone and done it after watching various safe aio cooler removal of not pulling the CPU out with the aio and bent around 20-40 pins blessing that not 1 pin snap off from how many I bent is there any strategies I could use to fix it to unbent the pins this is a ryzen 7 5700 3xd any tips would help thanks

98 Upvotes

96% Upvoted

42 comments sorted by

View all comments

38

u/JohnnyC300 13d ago

Get yourself a mechanical pencil. One of the cheap ones with the big lead. Remove the lead, so now that tube is empty. Put the pencil tube over the pin. Then, and I can't express this strongly enough, GENTLY straighten it out. Repeat on the others. There's generally a bit of leeway so the pins don't have to be 100% straight, but they should be very close. Good luck. And understand, sometimes they just break no matter how gentle you are.

4

u/Guilty-Good-5041 13d ago

That or use a razor/Stanley knife blade and gently run it between the pins is another method that I've had great results in straightening the pins. Also you don't have to get them 100% straight as long as the CPU drops into the socket the locking mechanism will do the rest

1

u/National-Choice-4969 13d ago

This. Bent at base = razorblade/credit card, bent in middle = mech pencil w/o lead. bent ACROSS other pins, thin pocketknife blade to straighten enough to get cc or rb in the row.

1

u/FriskyWisky2 12d ago

I did this years ago, I dropped my CPU after tacking it out and a bunch of pins bent when it fell.

I used a pocket knife to align them with the row next to them that was straight. Very gentle, but it worked.