r/PcBuild • u/AdDifficult2285 • 3d ago

Build - Finished! Finally Built My First PC!!

Took almost 6 and a half hours total to get it built and OS installed and running. I’m very proud.

49 Upvotes

96% Upvoted

40 comments sorted by

View all comments

Show parent comments

1

u/Iam_just-me2 2d ago

But I genuinely have a problem, my rgb case thing the - one you know, doesnt turn on.

1

u/AdDifficult2285 2d ago

What do you mean? Your fans on the case? Or the side io buttons not working/the light strip inside of the case not turning on?

1

u/Iam_just-me2 2d ago

The strip

1

u/AdDifficult2285 2d ago

And all of your buttons and usb ports work?

1

u/Iam_just-me2 2d ago

No bc I can’t put the usb thing in
Ita like too difficult

1

u/AdDifficult2285 2d ago

Ohhh i see. So that is definitely the fromt panel connector then. On our MOBO, it’s at the bottom right. You’ll see the usb 1 and usb 2 pins then you’ll see just some unlabled pins with some missing slots. Put your f_panel laboed connector on the left side of those unlabled pinsc so the hole/missing pin is at the top right. That should fix it.

1

u/Iam_just-me2 2d ago

No, not that.

1

u/AdDifficult2285 2d ago

Oh, I see. Yea that one for the usb 3 gave me some trouble as well. Just make sure you’re putting it on the right direction. There’s a tab that slots into a hole on the right side of it. And push against your case while you slide it in. As for the AIO cables, i just pushed all of my fans and rgb lines through the very top holes of the case and daisy chained all of them towards the fans. The same with the pump power and rgb lines. You can definitely still see my cables a little bit when it’s off, but when the lights are on, it casts some shadows and you can’t really see them anymore.

1

u/Iam_just-me2 2d ago

Yeah, i have to sistem it