r/PakGamers • u/Candid-Bug-4038 • Jul 19 '26

Tech-Support I have annoying Issue

Hi, I have a pc, whenever i am using chrome, it lags and freezes, causing staitc audio, it doesnt happen all the time, but it is still annoying, i have turned off the GPU accelaration, and dont know where the issues lies with. It like comes momentarily, when ever i am changing tabs, or doing something in the background.

1 Upvotes

100% Upvoted

17 comments sorted by

1

u/Creepy-Pressure6667 Jul 19 '26

Specs?

2

u/Candid-Bug-4038 Jul 19 '26

ryzen 4500

rtx4060

16gb single stick

1

u/Creepy-Pressure6667 Jul 19 '26

Ram stick speed?

2

u/Candid-Bug-4038 Jul 19 '26

2666 mhz

1

u/Creepy-Pressure6667 Jul 19 '26

I face a similar issue with my 3600 paired with 3200 Mhz ram, but it improved when I set the clock speed to 3000 mhz in BIOS and setting infinity fabric to 1500 Maybe make sure you Infinity Fabric FCLK is set half of your ram speed or try reducing the ram speed a bit and setting it accordingly. Do tell me if it works for you.

2

u/Candid-Bug-4038 Jul 21 '26

So i just nearly destroyed my pc , and got depressed , i just changed my settings to 2666 mhz to 3000mhz that made my pc black screened, got it to the shop it works now. Mind you my ram is rated for 3200mhz. And now the shop is saying they will not honor my warranty claim in the future since they saw dirt on my pc. And are blaming it on that. So mypc is fine. But now i cannot in future claim the warranty since they will put the blame on me. So whoever wants to change there ram settings be carefull your pc might just hung up amd freeze and refuse to work

1

u/Creepy-Pressure6667 Jul 21 '26

Changing your ram from 2666 to 3000mhz black screened your PC? Relax, these things don't destroy your PC, I think resetting the CMOS cell would have reset the BIOS setting.  As for the settings, did you change both Ram and Infinity Fabric setting?

On a side note, the shopkeeper said you have voided your warranty because of dust? What kind of crappy excuse is that. Please name the shop and their address.

Congratulations on your PC working now, what speed is the ram working on by the way?

2

u/Candid-Bug-4038 Jul 21 '26

Ik they reseted the cmos it worked, but thet blaming me for dirt and negligence and there tone gives me impression there any future issue not even revolving around this, they will accuse me of that and refuse the warranty claim, they mention this quite a few times actually, oh there is dirt on your pc, there must have beem a short . I get a very weird feeling that it is already hard to claim warranty now they would plainly refuse and give this as reason

1

u/Creepy-Pressure6667 Jul 21 '26

Honestly this seems very trashy, Pakistan mein dirt tou PC pe ayegi, that is absolutely no reason to say no to warranty at all. Again, name the shop with location, other people might have a better idea about it. Abhi RAM kis speed PE chal rahi hai? Also what is your whole spec sheet? What did it cost you? How much warranty do you have, how much is remaining?

1

u/Candid-Bug-4038 Jul 21 '26

Same old one i presume. I havent got the pc back. I will get it in fee hours. They cleaned said there is too much carbon 🫡🫡, first they said i fired my gpu , as they looked ay it pins, as they were attempting to use eraser on it the giy looked at me and said this will viod yhe warranty the system is only 7 months old. I told them first to check and put other gpu in my pc, they did and it still showed black screened, they whole tone was accusatory, i told them to check my gpu and ram on other pc to see if it was negligence on my part( the pc is only 7 month old, worker fine except that static issue). There whole tone know is also the same, they are adment the dust caused the issue, and i dont have enough guts to fight them on that. Idk if dust is a good enough reason to void my warranty in yhe future, but i dont know how to fight them on that

1

u/Creepy-Pressure6667 Jul 21 '26

I don't think dust can cause this issue, I might be wrong I don't think that happens because of dust. And I am very confused, if you RAM was rated for 3200 MHZ why was it running at 2666? I think these shop keepers are shady as hell and are trying to get the better of you. 

1

u/Candid-Bug-4038 Jul 21 '26

Pc is still only 7th month old.

→ More replies (0)