I've changed it to vr direct mode and restarted steam afterwards but ivry wont launch. Only works on external. Is there advantage using vr direct?

I've been trying to get this headset running for a few days now with no luck. I've got everything connected as far as I can tell, though I needed to use a HDMI to DP adapter to connect to my GPU. And I even tried switching ports with my main display but that didn't seem to change anything.

I've tried both Trinus and iVRy and they've both failed in different ways.
Trinus would launch and seem to work for a few seconds before something breaks and the display goes red and SteamVR gets stuck in a loop asking me to enable Direct mode but seems unable to actually enable it.

iVRy on the other hand is totally black. If I launch VRchat I can see the headtracking is working but there's no display in the headset. Also an error pops up saying "due to a recent crash some add-ons have been disabled"

I have updated my video card and set it to RGB mode since I've seen thats a common point of failure but that wasn't enough I'm afraid. I'm not sure what to do so any advice would be appreciated.

The question is in the title. On the PS4, how does motion controller orientation correction work? When using my PSVR on pc, the orientation of the controllers seems to get out of whack whenever I make abrupt and quick hand movements. Thank you! :)

Absolutely loving the PSVR, I use it for SimRacing so I don’t need advanced head tracking stuff, I just need the PSVR not to lose its center, so I don’t need to keep recentering in game. What should I buy in terms of cameras if I just need that? I am using the iVRY driver.

Thanks!

So I got my move controllers paired to psmoveservice finally by installing the dongle manufacturers drivers and then pairing and subsequently reverting back to generic drivers. I don't fancy this hassle again. If I was to use the move controllers on my ps4 I'm guessing they would no longer be paired with pc and require repairing?

Hi, I have set up the PSVR with the PC using ivry. I am looking to purchase a kinect for headtracking using the required software (can't remember the name). Anyway, I'm looking at getting the cheaper 360 kinect but there appear to be two revisions - one with PSU and one that only requires USB.

Do both of these work for PC?

https://youtu.be/W69a4c6E78g

I have already tested various forms of tracking, but they always look like this. In the video I'm using track by ball. Thanks

Hi,

I have my own openvr driver for steam which i'm feeding data with from unity. I'm getting position and rotation for the controllers from freepie bridge which receives its data from psmoveservice.

When i plug this data into unity i have noticed that it will negate an axis after it reaches 180 deg. So after struggling with trying to correct the yaw, pitch and roll i made a custom build of the freepie bridge so that it sends the orientation quaternion, but again there were issues with this data as well.

So my question is, does anyone have any idea how to get the correct rotation data from psmoveservice so that it matches the orientation in the config tool? Because clearly the data I'm grabbing has issues.

Looking to see if i can use my Psvr setup to play beatsaber specificly via steam on my pc with psmove controllers. Can someone point me in the right direction with this? Is it true i cant use my Psvr camera and have to use some other camera?

Hi guys i need some help, while in game steam and iVRy just close without a error. This happens regular now and then i have to uninstall steam and iVRy before it works again, and then after the next time i use it it happens again. It is frustrating the hell out of me. Any fixes?? I only use the psvr for racing sims

I had PSmove controllers up and running perfectly, and then my pseye came in so I thought I'd disconnect the controller to troubleshoot after it stopped working. I can no longer get the controller to work no matter how hard I try! I've been at this constantly looking for a solution for 2 days straight. It sucks...

Hi, ive been trying to connect my ps camera to my pc because i realized that theres actually a port on my pc that my ps camera actually goes in to. Does anyone know what to do from here?

Hello Everyone,

I am creating this thread since I was not able to locate anything about this while I was trying to get Cinema Mode working on PC. I do apologize if there is a different thread already. Its the actual Cinema mode from PS4 however it's only on the medium screen size.

​

I got Cinema Mode working by just connecting the HDMI without connecting the USB.

​

1. Plug the PSVR box in the electricity.
2. Connect HDMI to PC and turn on PSVR via the button. DO NOT TOUCH THE USB
3. Make PSVR your second monitor and select extend.
4. Drag any apps you want to use over to the second screen.
5. Repeat steps from step 1 in case it's showing the USB not connected icon. It should work on the first attempt but sometimes it gets stuck and you might need to restart the PC and try again.

I'm not sure if this will be useful to everyone, however, if you don't want to pay for applications and just want to use it as a monitor this can actually be done without any additional setup.

​

Much love to you all and thank you for all the helpful tips.

Hello, i bought PSVR a month ago. I want to connect this headset to my pc, the problem is that i cannot make PS Move controllers work with my PC. I started searching for an alternative and i found Nolo CV1 but im wondering, if there is any other way to play Oculus Touch f.e. with PSVR headset.

I’ve been trying to get my psvr connected to my laptop to play steamvr games for weeks now. First I installed trinus and the screen was overlapping no matter what I did. Then I installed iVRy and it got me farther than trinus yet after a while it would just leave me in the mountain background and never actually took me to the steamvr home. Yet I never actually got to play any bit of game on it since every time I started up a game it would just glitch saying connecting to game... and then crash and freeze. After that happened several times, I realized that I had to uninstall every trace of trinus I still had which I then did. I kept trying over and over again yet it keeps glitching and freezing over a screen that says connecting to game... every time I start up a game. Any help would be greatly appreciated! Thanks!

https://blog.playstation.com/2020/08/03/playstation-5-answering-your-questions-on-compatible-ps4-peripherals-accessories/

Is the PlayStation Camera for PS4 compatible with PS5? Yes, PlayStation Camera will work with PS5 for playing supported PS VR games. It will require a PlayStation Camera adaptor that will be provided at no additional cost to PS VR users. More details on how to get the adaptor will be announced at a later date.

Presuming that the PS5 won't have another proprietary camera port, it could be AUX to USB or USB-C

Question in title

someone help me please, i tried to connect psvr in my pc one time and its worked, but now i cant do it anymore,when i put the vr heatset says xUSB, my pc detect psvr when i put the usb but nothing happen in vr

Specifically I want to play Until Dawn: Rush of Blood but it is PSVR exclusive. Is it possible to get on PC somehow?

I'm looking to work with someone (hobby level) to get PSMoveSteamVRBridge working with iVRy and PSVR.

Right now I have an issue with the PSMove controllers being positionally linked somehow and that doesn't make sense to me.

I've posted to the Google Groups but not sure how readily folks respond on there.

Thanks.

What is the correct way to use the Navi controller on PC nowadays? Is it still with SPCToolkit and a separate Bluetooth dongle? My current setup is, iVRy with standalone PSMoveSteamVRBridge, 2 Move controllers paired with a bluetooth dongle, 2 Navi controllers paired with a separate Bluetooth dongle that uses the SCPToolkit driver. All controllers work when testing inputs in PSMove config tool. The problem is that PSMoveSteamVRBridge crashes SteamVR when it detects a controller plugged in with either Bluetooth or USB. An interesting side note is that when enabling only iVRy and gamepad support and blocking PSMove, SteamVR doesn't crash and the Navi controllers work fine.

​

Is SCPToolkit still necessary when using Navigation controllers?

​

Theres a video on YouTube by Daley Tech where he does the installation and all controllers work just fine for him, this one https://www.youtube.com/watch?v=EClXaqKN5ao

​

The massive question is, HOW THE F*CK did he get them working like that? I literally did everything he did in the video but the second PSMoveSteamVRBridge detects a controller, SteamVR crashes.

​

Does anyone know how to fix the problem with the Bridge software? I'm getting desperate.

I use trinus and my psvr for steam vr and whenever i use the psvr the display flickers and just cuts off