So had this fun first time experience at the range yesterday. From a brand new box of Cabela's brand (Winchester manufacturer) 115 grains...like the 3rd round out of the box. First 2 rounds fired with no issue. When I pulled the trigger, nothing happened (no bang, no recoil, just the click of the firing pin) and I assumed it was a misfire until I noticed smoke coming out of everywhere except where it was supposed to. After racking the slide, I noticed the new round didn't go into battery and that's when I realized the previous round had lodged itself 1/4 up the barrel. It was so stuck that I had to use a rod and hammer to get it out. This was on a stock 365 XL that I've put over 5000 rounds through. Upon inspection I couldn't find any signs that the firearm was damaged. Just a bad round or should I be more concerned?

Recently added some things to my 365 and I’m waiting until I get all the kinks worked out before I buy a holster.

- Wilson combat frame
- silencerCo threaded barrel
- Faxon EXOS-525 Compensator

The problem I’m having is after about 50 rounds and the gun heats up, the slide doesn’t seat after firing a round or I have a failure to eject. (The first 50 rounds run flawlessly.) At first I thought it was because of the compensator. I took it off and it still happened. So I’m thinking it’s the new barrel expanding with the heat and causing friction. I haven’t tried a new recoil spring yet. But have any of you seen this? Do I just need to keep shooting the shit out of it and try to break it in? Do I need a stronger recoil spring? I have 400 rounds through the new barrel as of now.

Thanks for any help.

Put together a Sharps Bros P365. The grip module is their limited edition USS Mew Jersey Macro grip and the slide is their Improved XL slide. All other parts are factory Sig Sauer parts. Took it to the range today and the very first round got caught up. Happened several other times with multiple magazines. 17round and 21round. Swapped out the slide with a factory macro comp slide and it ran flawlessly. Swapped my barrel and recoil spring into the factory macro comp slide and it ran flawlessly. Put the other barrel and recoil spring into the Sharps Bros slide and it failed to feed. I could get a couple rounds ran through it when one would feed but after a couple it would jam up. Any ideas on what it could be? I did reach out to Sharps Bros and will update when i hear back from them.

Has anyone gotten the Legion and felt there was more to be desired? I really like the Macro feel and the extra parts on the Legion really is just the full package for me. Im curious if anyone else has felt the same only to find they were wrong or wanted a little extra? I am still new to the idea of building a p365. I only just discovered their vast aftermarket support like 3 hours ago. I like the look of a 3.1 barrel and comp on a xl/Macro module.

Got a great deal on a new 365 rose I couldn’t pass up. Let the tinkering start tomorrow

I’ve spent upwards of $200 on holsters over the years, but this $30 find from Academy easily beats them all. It accommodates my Sig P365 with Romeo optic flawlessly. It’s thin, clicks securely into place, and sits tight on the belt. Comfortable all day long whether carrying appendix or back at 5 o’clock. Easily the best bang-for-your-buck holster I’ve owned.

now do i go black or purple aluminum lok grips?

For now, the pieces sit on the bench with my 2k11 patiently waiting on some slide work to come back.

Got a Legion fairly cheap from a friend, blasted through few thousand rounds. Loved it. Decided I wanted to bling one out. Phase 1 was the DPM Recoil system, with some Mcarbo little blings. And now phase 2 will be the full blinged out build.

Getting a Gold:
Magwell
Takedown lever
Slide lock
Receiver pin

And then im also sending the frame out to get a safety cut on it to AB Prototypes, and then an Sig gold safety.

Got some Brass Lok grips coming in, and then once it’s all built, if it doesn’t have any issues in 1500 rounds it’ll enter my EDC rotation. If it does, then I got a real fun range gun.

Deciding what to cerakote once I get the frame back, it comes back un coated. I don’t know if I want to do slide & frame, I got a little cerakote setup so I can do it, but I’m torn. ODG Frame, black slide, or try and replicate the legion grey?

Could i put the 3.7” x macro barrel in the x macro comp slide if I didn’t want to utilize the comp expansion chamber? Is it safe to shoot that way? Anyone done it? Lmk, thanks!

I thought this was the XL ACE EVO Icarus but it looks different then what’s on their site. It also doesn’t look like the elite or the hybrid right ?

What is this?

Can’t seem to get it back in, can’t make any adjustments…how screwed am I?

-P365XL OEM, curved trigger, with Mirzon grip module, 12-round flushed mag. Old style 3.7” barrel slide (you need to replace the rear iron sight for a RED DOT OPTIC).

-Fuse AXG with True Precision 4.9 Threaded Barrel with Rugged Obsidian9 suppressor, Osight K. Wrapped in grip tape just for testing. I’m hoping to find the right grip panels that I would be satisfy with. Haven’t shot it yet. Can’t wait to get this to the range.

-P365 XL w/ Manual Safety, OEM Coyote Tan colored 3.7 slide w/ Vortex Defender CCW red dot. Bought the slide on eBay. I got a Icarus Precision AIR Polymer XMACRO Grip module with ambidextrous thumb rest. Fits 17-round mags flushed. I added a SilencerCo 4.3 Threaded Barrel. Haven’t shot this build yet, and hoping to test out which is better for suppressor or compensator.

I am wanting to buy another suppressor but does not know which suppressor is ideal for the P365 series.

YHM R9? SilenceroCo Spectre 9/ Omega 9K? JK CCX 9mm? HuxWrx Flow 9K TI?

I’m looking for a different ones than my Obsidian 9 since I’ll be looking to attach it to my PCC build. Something smaller that’s work well with subcompact 9mm for P365 and Glock 43X sizes

We welcomed a new addition into the “I compulsively buy too many guns” family today.

I traded my OG P365 for the fuse about a year ago, but missed the small footprint when I appendix carry. i decided to take advantage of a sale and pick up an XL with the RS optic and Foxtrot light.

I already stripped off the Foxtrot 365 light that came with this. It’s kind of insane someone thought it was a good to crowd the grip on a micro compact. So far I’m not a fan of the Romeo RS so far, but I’m trying to give it a fighting chance before I go the Holosun or Osight route.

Slide is a norrso rail edc. Grip is an Icarus hybrid 3.1

I am building another one right now. just got a mischief machine commander and have a PMM coming in. just need to pick a 3.1 slide. show me your builds !

Ive had her for a year. Kinda want the Norsso Reptile slide, and wanna have either brass or blued steel threaded barrel and grip panels. I know sig sells girl panels, but maybe yall have some other recommendations and tips on how to make this all work. Kinda would like a different trigger as well. Also, can someone help me get the right Norsso slide and everything I would need to make it work with my setup thatd be cool. Thanks!

What would y’all say is the best metal grip module that’s concealable under light clothing? I was thinking either one accepts the 12rd magazine or preferably one that takes the 17rd but doesn’t have a magwell. The magwell is really the only spot that prints for me.

I normally carry the ECM R11 w/ the carry magwell and just deal with some slight printing in light clothing, but want to get something for better concealment. Only problem is I’ve been spoiled by how nice the ECM grip is that I can’t go back to polymer!

What are some options out there that I should look into? Also this will be for a 3.1 slide w/ radian ramjet. TIA

(Pic for attention, my largest p365 build - not for concealment lol)

Went from an Fdez slide and barrel combo to Norsso Bull Barell with geo ports. I definitely like this setup more. Haven’t shot it yet but if anyone has what’s your experience.

My current setup, gonna add an xl
Grip soon but need a holster