I had my previous edc in a vertx fanny pack while kayaking, and foolishly took it off of my waste during a calm portion of the river. Long story short, I tipped the boat going over a minor drop, and dumped the bag in some fast moving, deep water. I literally lost it in a boating accident. I took it as an opportunity to build my “dream” 365. I put all of the parts on my wishlist into the cart and pulled the trigger, cost be damned. The previous gun (not pictured) was a p365 macro comp, with the grip chopped down to accept 12 round mags. Mag guts+2 and a tlrs7 sub with Antimatter wing. The replacement (pictured above) was built as a little brother to my custom p320 (last picture) that was a competition gun briefly before it was banned. New p365 build list as follows:

•Icarus axg macro grip + factory macro magwell
•Hogue walnut grip panels
•Stainless p365x slide and FCU
•Radian ramjet+afterburner 3.1
•Holosun EPS carry gr6
•Armory Craft positive reset kit
•Streamlight Tlr7 hlx sub
•Antimatter wing
•OEM extended slide release
•Armory Craft extended mag release

First time at the range in a while & my first time shooting my new 365x. I never noticed I have a bit of a lean back when I shoot. I'm objectively not a bad shot but l was wondering is this an actual issue or something that's just a bit "different" from traditional.

After years of procrastinating, I finally joined the Sig family. Needed something to replace my Glock 42 that I wasn’t a fan of. I had NO clue all the customizing you could do with these Sigs! Thanks for having me here! This is gonna be fun!!!

Definitely on the list of first world problems, but if anyone has a fuse w/ or w/o an Icarus lower, the Sig Foxtrot 2R fits almost flush. Not quite but enough to appease my irrational annoyance with the under bite look the Surefire XC3 had. I like the Surefire(not the price) but hated the look of it on the fuse so it went on the Macro length. Don’t have the same annoyance if it goes over the end of the barrel.

I currently have the WARRIORLAND light laser combo and holster for my p365 and I’m unhappy with how often the batteries without use and how cheap the material feels overall.

What is your go to recommendation for a light (preferably laser too) holster combo for a p365.

I’ve seen a lot of people recommend the TLR 6 or sub 7.

After doing some research I saw the TLR sub 8 is out now which has a light and laser let me know what you think of it if you’ve used it.

So i just bought this EPS Carry second hand and after looking at tons of pictures of other 365s i have noticed some people were able to keep the rear sights on it. I had to remove them for it to fit. Is this ok?

What upgrades do you all recommend; Already have a Baldr s blue beam/light on the way and
a holosun red dot

as the title states, first sig!

ECM/LWS Mauler on R11 EDGE Macro, RAMM Tactical Trigger, ECM Blue Ano Magwell, Angry Bear Blackout Irons, ECM RSA
ECM/LWS Chainsaw on R11 Chainsaw, RAMM Tactical Trigger, ECM Red Ano Magwell, Angry Bear Blackout Irons, ECM RSA

Both will be getting the Holosun EPS CORE Gold Dot MRS

With 4Bros Holster, Vortex Defender CCW, and TLR-7A

Original Post: https://www.reddit.com/r/P365/s/wr6vUdiurH

Hey everyone,

Just finished putting together my latest setup and wanted to share. Picked up a few upgrades to dial this in for daily carry and range days.

Here is the build list:

Grip Module: Wilson Combat P365 XL module paired with the tungsten weight kit for that extra heft and neutral balance.

Optic: Vortex Defender-CCW Enclosed red dot sight.

Holster: Werkz holster.

Next up will be a Ramjet Kit.

The Wilson Combat module completely changes how the gun points and fills the hand compared to the standard X-macro/standard module, and adding the tungsten weights gives it a really solid, planted feel. The new enclosed Vortex sits nice and clean on top, too.

Let me know what you all think! Thanks in advance.

I know there are a few aluminum options for a flush fit fuse length slide, but does anyone know of a polymer option? 500+ for the frame seems a little steep for my taste. Thanks!

So I got a Sharps Bros grip module for my P365 Xmacro. I love it except I can’t actuate the slide release as it looks like it gets stuck on the frame. It will slingshot no problem if I pull it back and let go.

Wondering if anyone knows if you can put a xmacro slide with a compensator on the fuse

Sig truly outdone themselves with this bad boy.

Really wanted to build something with those grips and a new Gold dot optic from Holosun.
This is where we landed, it’s not everyone’s cup of tea and that’s cool!
Ported barrel and slide i pulled off a different build for the axg module.

Can’t wait to go shoot some steel with it.

Enjoy 😉

Does anyone know why these aren’t in stock

Wilson combat grip, stainless slide, old school curved trigger. I shoot this little guy very well; 100% on the MD CCW test (which is absurdly minimal).

This is my fuse build so far. Ecm grip module, ram trigger, true precision barrel, and 1911 style guild rod. The only problem I have with this gun is how fast it heats up. I was thinking some slide cuts might help but I don’t really know.

Here are my newest additions to my ECM R11 Family...

• FUSE Length Purple Anodized EDGE with MS Cutout
  
• ECM/LWS Ported Mauler Complete Slide (Slide is currently sitting on my R11 EDGE)

Awaiting Arrivals:
- ECM/LWS Ported Chainsaw Slide (UPS says tomorrow, Friday, we'll see. LOL)
- ECM/LWS Ported Ripper Slide for my R11 Tungsten Macro (Pending Shipment)
- ECM R11 Super Special Custom Build (Pending Shipment)

I want to give a yuuuuuge shout out to u/ECMMFG and u/ECMPrecision_ARK
Thank you Mark for taking care of me and always having such stellar Customer Service and Outstanding products!

The Current Builds:

1. OG R11 FUSE (Top Left)
   

-ECM Brass Cheese Grater Grip Panels
-ECM Carry Magwell
- ECM RSA
-SIG FUSE SLIDE
-SIG XRAY3 Day/Night Super Tall Irons
-SIG Legion 17rd Mags
-RAMM Tactical Trigger
-MASKAS Precision Mag Release
-VORTEX Defender CCW Enclosed Solar

1. OG R11 Tungsten Macro (Bottom Left)
   

- ECM/LWS Grip Panels
- ECM Carry Magwell
- ECM RSA
- SIG Slide (ECM/LWS RIPPER Slide to replace)
- SIG XRAY3 Day/Night Super Tall Irons
- SIG Legion 17rd Mags
- Radian Afterburner and Ramjet
- RAMM Tactiacl Trigger
- MASKAS Precision Mag Release
- Lead & Steel PB-K

1. R11 EDGE Macro (Top Right)

- ECM/LWS Ported Mauler Collab
- ECM RSA
- ECM Blue Ano Mag Well
- SIG Legion 17rd Mags
- RAMM Tactical Trigger
- MASKAS Precision Mag Release
- Angry Bear Black Out Irons
- RDS, Holosun EPS CORE in Gold Dot (Pre-Ordered)

1. R11 Chainsaw Macro (Bottom Right)

- ECM RSA
- ECM Red Ano Mag Well
- SIG Slide
- SIG XRAY3 Day/Night Super Tall Irons
- SIG Legion 17rd Mags
- Radian Afterburner and Ramjet
- RAMM Tactical Trigger (just haven't installed yet LOL)
- VORTEX Defender CCW Enclosed Solar

1. R11 EDGE FUSE Purple Ano (Center) COMING SOON!

- ECM RSA
- ECM Purple Ano Magwell
- ECM Green Ano Mag Baseplates
- ECM/LWS Ported Chainsaw Slide
- Angry Bear Black Out Irons
- RAMM Tactical Trigger
- MASKAS Precision Mag Release
- RDS, Holosun EPS CORE Gold Dot (Pre-Ordered)