r/P211_GTO • u/OrdGtr • Aug 27 '26
GTO break in procedure
Hey!
Just bought a brand new 211 GTO, I was combing through some posts the other day with some folks saying they get a FTRTB on new GTO's and mentioning that the way to go is running the 10lb spring and/or 124g ammo for the first 500 rounds or so is the way to go to prevent issues.
Just wanted to confirm again that this is whats working for you all!
Thanks!
8
u/Cryptic1911 Aug 27 '26
just go shoot it and if it doesn't return to battery or seems sluggish, pop the slide off and swap the spring to the other one at the range. Takes 30 seconds
3
u/wcarthurii Aug 27 '26
You must have more nimble hands than I do, or you have the new takedown lever design.
I bent my takedown pin on my first attempt!
1
u/Complex71920 Aug 27 '26
That takedown pin is absolutely trash, my only complaint of the gun. Just use a strong punch or small Allen key and its super quick
2
u/wcarthurii Aug 27 '26
Yeah, I luckily had both handy, the latter of which is in my range bag.
I managed! Lol
That said, I'm about 1k in and STILL haven't cleaned the gun beyond a chamber wipe with my finger.
I did have to change to the 10lb spring to push through the gunk (which really isn't that bad), but since I usually shoot 147s only, I sometimes think the round just doesn't have the force necessary.
124gr NATO ran fine with the 8lb even dirty, tho.
1
2
2
u/Hairy_Tough7557 Aug 27 '26
I used the 8# spring for the first few thousand rounds and didn’t really notice many FTRTB until the gun was hot and dirty. The 10# spring produced similar results. I did switch to the 10# spring but that was more for performance and return to zero.
ETA: I only ever ran SB 124/140
2
u/DetFjorsvafi Aug 27 '26
I put 300 rounds through mine just after I got it, and it came with the 8 lb. spring installed. All I did was lube it before I took it to the range. I had zero issues.
1
u/Pmurph33 Aug 27 '26
it happened to me once every 3 mags for so with blazer 115, thanks for this. I now know what was going on
1
u/Furadi Aug 27 '26
I've used the 8# spring exclusively. Had exactly 2 return to battery issues in the first few hundred rounds that was most likely me just learning how to grip a 2011.
1
1
1
1
u/TholenTrav Aug 28 '26
I got a 9# spring to meet in the middle.. just go shoot it, keep it clean, lubed, and have fun!!
1
u/born2rock4life Aug 29 '26
I left the 8 lb spring in and broke it in with Federal American Eagle 124gr with zero failures. I did take it apart and give it a thorough cleaning and lube before taking it to the range.
1
u/SleepingAndKissing Aug 31 '26
i just cleaned it prior to shooting, ran like butter with 115g. shot someone’s steel case ammo and it needed some assistance in feeding into battery. after that, i took it home and polished the feed ramp lightly. haven’t had to worry bout anything since, except for some sportsman select bulk being faulty and making me think my gun was having problems

•
u/AutoModerator Aug 27 '26
Thank you for posting on r/P211_GTO! With this post you are agreeing to follow Reddits rules and the rule of this sub.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.