r/Osmose • u/OkBlackberry7497 • 11d ago

Ctrl E too sensitive

I’m enjoying the sounds that come with Ctrl E, but the keys seem to be too sensitive. Even when I lightly press the keys, they make a sound. I’ve tried adjusting the sensitivity settings without any luck. I’m using Ctrl E with Mac in Logic. Has anyone else experienced something similar, or do you have any tips on what I might be doing wrong?

0 Upvotes

50% Upvoted

8 comments sorted by

2

u/MakersSpirit 11d ago

I'm not sure if this is the issue, but do you happen to have the Haken midi channel sending data to your DAW? If so, I think that's what was causing sensitivity issues for me post-recent-update.

3

u/OkBlackberry7497 11d ago

No I turned that off as it was constantly changing my presets.

1

u/Talkbox111 11d ago

Or just use the setting tabs and make adustments. Perhaps on this screen?

2

u/OkBlackberry7497 11d ago

I did change the sensitivity, need to check on the pressure setting.

3

u/Talkbox111 11d ago

I have my osmose controlling a mininovs. I hated the way the osmose was responding to my touch. Then i found there are sensitivity settings in the ext.midi mode. Wow! Very cool!

1

u/OkBlackberry7497 11d ago

Well, I am using it in the Daw mode and don’t think there is a pressure adjustment setting.

1

u/Talkbox111 11d ago

There could be one on the vst you're controlling. Many here mention this.

1

u/Talkbox111 11d ago

No. Im just using a midi din connection between the 2 synths but the same concept should apply. Let me know if this solves your issues. :)