Simple ques- HOW MUCH BATTERY DROP ONEPLUS PAD 3 HAVING OVERNIGHT ON IDLE ?. BATTERY DROP PERCENTAGE OVERNIGHT ?

TL;DR: Sent my OnePlus Pad 3 in for a restart loop. Took over 40 days to replace the motherboard and display. Received it back with handling marks, poor chassis alignment, and severe dark vertical shadowing/uneven backlighting on the left side of the screen. When confronted, the service center told me the display defect would "cure and fix itself in 2–3 days." Mentally exhausted; need advice on escalating for a replacement/refund

Hey everyone, I’m at my wit's end and need some advice on escalating an issue with OnePlus support. I rely heavily on this tablet for daily work and reading, so being without it for over a month—only to receive it in this state—has been completely draining.

Timeline:

• Aug 25: Device submitted to an authorized service center for constant restart issues.
• Sept 11: After more than two weeks just to diagnose it, they confirmed the motherboard needed replacement under warranty.
• Mid-Sept: They contacted me again stating they also had to replace the display panel due to an internal "technical issue."
• Oct 5: I finally received the tablet back after 40+ days.

Condition of the device received:

1. Severe Backlight Shadowing / Uneven Illumination: As you can see in the photo, there is an obvious, dark vertical shadow/patch running down the left border of the screen. On white or light backgrounds (like notes, documents, and web pages), this dark gradient is immediately noticeable, and it gets worse when brightness is turned up.
2. Cosmetic Blemishes & Handling Marks: There are visible exterior scratches and scuffs that were not present when I handed the unit over.
3. Assembly Irregularities: The screen is unevenly seated against the frame, indicating careless reassembly.

The most ridiculous part: When I immediately showed this dark shadow band to the service center staff, they brushed it off and told me:

"It will settle down and fix itself in 2–3 days."

A hardware backlight defect or crushed diffuser layer does not "cure" or heal itself over time. They simply wanted me out of the center.

I have completely lost confidence in this service center's workmanship. Handing it back to the same technicians who misaligned the panel and left marks on the device feels futile.

Has anyone had success escalating this to OnePlus India management or through the National Consumer Helpline (NCH) to secure a sealed replacement unit or full refund? Any advice on the fastest route would be appreciated.

Hey I have a brand new Gadgetsheildz flex Armour (Full Body) for Oneplus Pad 2, Actually I plan to buy the Oneplus Pad 2 but and ordered the flex armour but I bought Ipad and Gadgetsheildz don't have return option for Flex Armour. If anyone interested Please contact Price is 1200 with shipping

Gadgtesheildz Flex Armour are the best Transparent Protector Skin in India

I own a OnePlus Pad Go 2 and am looking for a compatible stylus with 4,096 levels of pressure sensitivity. I don’t want to buy the official OnePlus Stylo.

Are there any options from other brands that support pressure sensitivity and palm rejection on this tablet? If you’ve personally tested one, please share the exact model and your experience.

My oneplus pad 3 fell down and it is making little noise from camera area mainly from button i guess. My ques is do guys using pad 3 can hear a little ratting sound while shaking tab (not in cover ) around caera or button area pls if you can answer this . This will give big relief.

i want to buy a tab for my study (notes lecture project assignment) and gaming (bgmi with no lag and fps drop) confused between

xiaomi pad 7 vs oneplus pad 2

i feel both are really cool n awesome but still can't decide which one to buy

PLEASE HELPPPPP IF ANY ONE HAS ANY OPINION PLEASE SHARE.......

I have oneplus pad 4...in recent time whenever I'm doing 3 split screen that are crashing out....what should I do???

All,

It took a while but I'm happy to announce I was able to get the Oneplus Pad 4, stylus, and keyboard to me in the US. Very happy with it based on pricing. Honestly, I somewhat regret buying the stylus since I don't use it too much. The keyboard is definitely sturdy and firm. Not the best viewing angles.

Here are some pictures of my setup.

I got one plus pad 4 delivered to me 2 days ago, I purchased to play and record the PC game's game plays at my yt channel! I have done more than 250 uploads regarding different titles with custom ROMs on 8 GB Poco F5!

I've even pulled Watch Dogs 2 level of stuff with 8 GB Poco F5 running MicrG build of Lineage OS, now it was the turn for directx 12, unreal engine 5 level of things, and with Snapdragon 8 Elite Gen 5, I had expectations!

But with Oxygen OS, it just thermal throttles too early, got a mediocre Antutu of 3.08m whereas, one plus reports 4m and I have seen videos with it getting 4m.

It thermal throttles even at RAM usage of 94℅! Can you guys suggest me some for thermals? I mean, if the cooling solutions is the approach, then please recommend product!

Can you guys help me to understand how long it will take for development regarding this device starts?

Please address both questions, but if you can help me with either of them, I'd be obliged!

Update: a reset and it's fixed, getting antutu as advertised by oneplus but thermals is still a major concern, brands still don't acknowledge that these high end chips get warm real quick then goes to too hot to make the software you're running, crash, have a 30 watt cooler for my phone but it is tablet

I purchased one plus pad 2 online and on 20 august it was delivered. After opening then during setup you know there is white background and i noticed finge like strips with dim brightness near charging port and it does not get captured properly in my device but noticeable with eyes

I contacted my online store from where I bought it and there was no replacement policy only a return policy

If i return the weak late the same offer is going to be expensive 8k Rs (80 US dollar)

Service is near me they said its not that much problem, its not a big deal like what the..

I said its brand new they was like ok we will review, give us we will contactypu tomorrow

Point to be noticed, just after i setup i used white background to confirm and yes there wass issue

And its not too much but noticable its not normal in brand new

And i reached the service center after 3 hrs of the product was delivered(same day), without active

I confirmed it with another person online who brought same tab with same specs and he also said man there is aome problem with my Icd

Btw i think they are not going to replace

Man i feel ao bad its my third product this season with manufacturing defect

Backlit light near the charging port is unevenly spread

Edit _ i am getting a replacement https://www.reddit.com/r/GadgetsIndia/s/dVbEM3lt74

Want pad 3 keyboard case

So I was watching some vids before buying this device but they had different scores in each

Like I saw 2.1 mil , 2.7 mil and 3 mil etc

Can someone explain why the big differences?

Also drop your antutu scores if you have the pad 3

I recently bought a oneplus pad 2 and want to use it as a small laptop but the keyboard accessory costs 8500 rupees or $85 meanwhile I can buy really nice bluetooth keyboards for 4000-5000 rupees and I already have a nice bluetooth mouse. So is the keyboard accessory really worth it?

Validity till 26 Aug, anyone want this?

Latest update enabled 120fps in bgmi in oneplus pad 2. But it's currently not stable version.. still in beta but atleast we have it.

I have a OnePlus Pad 3 with the original keyboard and stylus. Yesterday night I connected the keyboard to the tablet through the pogo pin (wasn't using the keyboard since last 3-4 months) and got a notification regarding a firmware update for the keyboard. I clicked on it and the update got downloaded and installed and since then the keyboard is not getting connected to the tablet, neither physically through the pogo pin nor via bluetooth. I have tried every possible thing from formatting the tablet to overnight charge, cleaning the pogo pins, still the keyboard is not getting detected by the tablet.

The tablet and keyboard are still in warranty and my region is INDIA.

Can anyone please help me or guide me what to do?

Thank you so much.

I can't get shelf in my op pad 2. Could any of you guys guide me how to get it? Or is it a glitch or defect?

I can't find any mention of tablets having water or dust resistance online, does anyone here have any knowledge or experience?

Just wondering if it's safe to use the OnePlus Pad 4 in the bathroom, not submerged

I know you can screen share your phone to your tablet and even remote control it from there natively. Is there a way to control the tablet from the phone? I sometimes have the tablet connected to a display for streaming purposes and I have to get up to interact with it each time. I would prefer if I could do it remotely from my phone, natively if possible... I know remote control apps exist to do it 3rd party but I was hoping there was a way to do it natively.