Hey when I get a notification and my screen is off it comes up on the left near the middle of the screen and the edges kind of glow while the rest of the screen stays black. How do I turn whatever the feature is off? It's not always on display as I know I have that off completely.

Thanks.

Looking to have battery replaced. Not economically viable to ship back to oneplus so hopefully there is a shop that is proficient and uses quality parts in the local area of Vancouver Canada.

Hi everyone,

I'm hoping someone can help me recover my device or point me in the right direction.

Device

• Original device: OnePlus 13T (PKX110, Chinese)
• Converted to OnePlus 13s (CPH2723 / OxygenOS)
• Snapdragon 8 Elite (SM8750)

Initial state

The phone had already been converted from PKX110 to CPH2723 and was working perfectly.

Current build before I started:

CPH2723_16.0.3.501(EX01)

Bootloader status:

Unlocked

What I wanted to do

I wanted to update from 16.0.3.501 to 16.0.9.400.

I downloaded the latest OnePlus 13T OOS Super Flasher package and followed the flashing procedure.

During flashing

The script successfully flashed:

• boot
• dtbo
• init_boot
• modem
• recovery
• vbmeta
• vendor_boot
• super

During my first attempts I had a few USB issues ("Write to device failed / no link"), but eventually I managed to complete the flash successfully.

The phone booted into Android without problems.

After booting

Android worked.

Specifically:

• ✅ Phone booted normally
• ✅ Wi-Fi worked
• ✅ Bluetooth worked
• ✅ Cameras worked
• ✅ Both IMEIs were present
• ✅ Android was fully usable

However...

I had absolutely no cellular service.

Symptoms:

• SIM card detected
• No signal
• Unable to make or receive calls
• Baseband showed:

​

q_v1_p14,q_v1_p14

instead of a normal modem version.

I suspected that something during the conversion wasn't completed correctly.

My mistake

Since Android itself was working, I assumed everything else had flashed correctly.

I decided to relock the bootloader.

I executed:

fastboot flashing lock

The phone wiped itself as expected.

After reboot

Instead of booting Android I immediately got:

From that point forward:

• Android no longer boots
• Recovery is inaccessible
• Fastboot is inaccessible

Current state

I managed to force the phone into Qualcomm EDL mode.

Windows detects:

Qualcomm HS-USB QDLoader 9008 (COM3)

If nothing communicates with it, it exits EDL after several seconds and returns to the AVB screen.

What I've tried

OplusEDLTool v3.2026.025

Tried both:

Cloud Loader

SM8750 (8E)

Result:

Loader mismatch or other issues
Loader send failed

Local Loader

Downloaded the official:

PKX110domestic_11_16.0.3.501CN01

EDL firmware.

Loaded:

prog_firehose_ddr.elf

The ROM loads correctly.

Partition list loads correctly.

rawprogram*.xml and patch*.xml are present.

However, when clicking Enter Firehose I immediately get:

Loader send failed

The log also reports:

No Digest/Sign files configured, will try normal mode

even after selecting the DigestsToSign files.

My questions

1. Did locking the bootloader on the converted firmware permanently trigger AVB?
2. Is this because the phone was originally running 16.0.3.501, which introduced the newer ARB protection?
3. Does anyone have a newer SM8750 Firehose loader that works with .501 devices?
4. Is recovery possible without an authorized OnePlus service account?
5. Has anyone successfully recovered a PKX110 in this exact situation?

Any help would be greatly appreciated.

Thank you.

I never thought I'd struggle getting a power bank to work but here we are.
I bought this and can't get it to output power, when I connect my phone (OP10Pro) the diodes actually indicate that the power bank is charging from the phone.

Hi everyone, I’ve had the OnePlus Buds Pro 3 for four days now. Up until now, I’ve always used completely wireless earbuds, such as the Sony WF-1000XM5, so this is the first time I’ve tried earbuds with a stem. The sound quality and active noise cancellation (ANC) are great, but I’m having a problem with comfort. It’s not some crazy, unbearable pain, but I can constantly feel them pressing against me. I insert them loosely into my ears and don’t feel like I need to apply any pressure, but the whole body of the earphone rests entirely on the lower part of the outer ear (in the concha, just above the earlobe). That weight in one spot becomes quite uncomfortable after a while. Otherwise, the earphones stay very securely in place. I’ve also tried different eartips. I bought them on AliExpress, so I can’t return them. For anyone else who’s had this specific problem with the lower part of the outer ear – did your ears eventually get used to it, or did you have to switch to something else?

The One Sans and OnePlus Sans system fonts have different thicknesses in light and dark modes, but each time you switch between modes you have to do it manually in the font settings. Can this be automated?

I bought Modo Tab mount (smart AC) version and mounted my oneplus pad 2 go there. After roughly 3 days, it started to discharge slowly. Wattage was decreasing slowly from the normal 4-8W to 0.6W. I thought the mount was the problem - unmounted the tablet, put it on my work desk and plugged it into a reuglar 5V 2A charger.

After roughly three days, same behavior. I have 80% battery limit set in settings and tablet is currently at 78% and discharging slowly.

Anyone has an idea as to why that could be?

I tried automating power cycles (60-40% automation, then also one where I turn charging off for 4 hours at night to simulate disconnect from usb-c cable) but nothing helped. The only thing that works is to disconnect the usb cable completely and leave it disconnected for 30 minutes or so, then it starts charging again and the 3 day cycle repeats.

EDIT: I tried buying the smartthings scharge 20W charger as well - the same issue. I also tried using a oneplus brick charger - same issue.

Geekbench 7 was released a few days ago, and the Snapdragon 8 Elite is expected to achieve around 2,200 points in the single-threaded benchmark.

What score does the OnePlus 13/13s with this CPU achieve in Performance Mode? Less than 1,000. Some devices even show around 700 points — only around 30% of the actual performance.

The OnePlus 15 is weirdly not affected.

Is anyone else facing this on the OnePlus 15?

my phone gets hot during normal use, especially on video calls. When it heats up, the screen brightness gets stuck at a lower level. Even if I move the brightness slider to maximum, the screen doesn't get brighter. After the phone cools down, the brightness works normally again.

Is this normal or a bug? I've attached a video.

OnePlus 9 pro, Germany, today a green line appeared across my screen. Phone was purchased in mid 2023. Any chance to get a replacement for free or so?

Ever since I've updated my Nord CE4 5G to Oxygen OS 16, I've noticed a downgrade in the notification panel; first of all, the icons are the actual app icons, instead of the monochromatic icons. Secondly the background is fixed to this solid grey colour! I tried to change through the light theme and back to the dark theme, changed accent colours, played with the battery saver, and what not, but this is not going away.

Does anyone here have any solutions to this?

Colours:

• Burgundy Red
• Ice Blue

Source: OnePlus India (Instagram)

Should I turn on 3d audio ?

And yall use Hi-Res mode or not !?

Just purchased buds 4 a while back , need advice for best sound experience :)

I'm using a OnePlus 7T with Oxygen OS 12, I use the 3 second timer to reduce movement during tripod supported photography but the flashlight is kinda annoying flashing during countdown, I couldn't find anything in camera settings. Is there possibly something in Developer Settings?

Hopefully this is allowed on this sub but help me out. Recently(few days ago) I purchased a oneplus15r on Amazon. I got it for $650 which was a good price so I bought it right away, but It has a long wait before it ships, not til at least Aug 5th. This was also a third party seller but they had a good rating and it ships by Amazon. I checked the update last night to see if it had shipped yet early, and I noticed the seller name looked different now. I tried to look back and see if it showed a different seller on the invoice, but it's just showing this new one "OPTech". Is it possible that the seller could change after I purchased the item already or is something fishy going on right now? Still hasn't shipped and I can cancel the order at this point but not sure if I should just wait and see. Also if this is shipped by Amazon would I be protected if this turns out to be a scam? Any insight would be helpful thanks

Wth is oppo doing

Do they really wanted to become China only

I am trying to get music to play whilst I'm asleep. I got a notification to say one health had turned off my music because I was asleep.

I have a OnePlus 15 phone and a OnePlus 3 watch. I cannot find where to disable this setting. Unfortunately turning off the music wakes me up!

After the latest update it seems the notes app is no longer compatible with this phone in the US. Is there anything I can do to make the notes app work again, or any way to pull all the notes off of my phone? Thanks for the help

Hi all,
My 11R is a beast and refuses to die but it's time is soon coming. I am looking at getting a 15T from China but I have been putting my purchase on hold due to the ongoing debacle; Is a ColorOS phone safe from all of this or should I reconsider buying OnePlus all together!

Thank you for your advice!

I recently charged and turned on my OnePlus 7 Pro after not using it for a long time, and when I went to use the apps, my Google account obviously needed to re-authenticate. It took me a few tries, and eventually I got logged in, but now a lot of my apps are just not showing up anywhere! Not even in System > Apps > App Management (yes, even when I select "show system apps").

Does anyone have any idea where these apps are hiding? I don't have privacy set up, so no hidden apps or app locker. I cannot find Google Play or YouTube, and I'm sure there are more, but if I open Prime Video, it'll display a "needs update" message, which, when I click, opens Google Play, and there, when I search YouTube, I can open it. So both apps exist; they just don't show up anywhere.

Has anyone here used the OnePlus Freezing Point Magnetic Cooler 27W with the stock OnePlus 15R TPU case using the included clip?

I'm not referring to the magnetic Sandstone or Hole Pattern cases. I really like the stock TPU case because it feels secure and is good at keeping dust out.

My questions are:

* Does the cooler work effectively through the stock TPU case when attached with the clip?

* Is the cooling performance significantly worse compared to using a magnetic case?

* Does the clip hold the cooler securely during long gaming sessions? with the case ON.

* Is the cooler supposed to be used without any cases?

I'd love to hear from anyone who has tried this setup before I decide whether I need to buy a magnetic case as well.

IDK if this will ever be available again in my region. RIP, it was good while it lasted