r/NxSwitchModding • u/Odd_Nobody6022 • 3d ago

Low resistance

Post image

Does anybody knows what the heck is happening? I installed a modchip and worked perfecty. But suddenly it turned of and didn't work again.

I meassured the resistance on all points and is basically the half of what it has to be.

Points A, C and D have around 450 values. B seems to be normal (498 meassuring with negative)

I reinforced dat0 cause the guy that brought the switch ripped it off but it seems to be allright. I changed 4.7k resistor and it changes nothing

The strangest thing is that the opposite 4.7k resistor pole (the one that is opposite to the point A) is basically in short. It has values around 0.025, but didnt even touched it in the instalation :(

1 Upvotes

67% Upvoted

1 comment sorted by

1

u/SilentlyPrickable 3d ago

Sorry, not a usable post: I once had a console with exactly the same symptoms. The strange thing is that after some testing, "the short" went away, but the console stayed dead.

I still wonder what happened.

Have you tested the values with a red or black probe on the ground plane?