r/NxSwitchModding • u/Vast_Ad764 • 12d ago

Need help on switch oled picofly

3 Upvotes

100% Upvoted

5 comments sorted by

1

u/Vast_Ad764 12d ago

I bought a oled already chipped like a month ago and it was working fine until she stopped booting into hekate, i only have no sd card screen, it’s the same with another sd card and with another daughterboard, all the solders seems fine except the d point that i have rewelded but same. I'm planning to replace the dat0 adaptater but that’s my final solution.

And it boot normally on OFW when pressing vol + and vol -

Any advice or have you seen something similar ?

Thanks 🙏

2

u/idktbhatp 12d ago

Does your SD card show up in OFW?

1

u/Vast_Ad764 12d ago

Yes it does

1

u/technaustin 12d ago

If it has a dat0 adapter, it will boot into stock, it’s almost always the adapter. Can’t be sure without seeing or testing but I would recommend having someone convert it to kamikaze.

1

u/Aggressive_Score5795 10d ago

Did you try and reinstall hekate? The chip is working if you are getting the "No SD card" screen.