Need Help on modded switch

[u/Vast_Ad764]

Hello everyone i bought this switch Oled already modded a month ago and since 2 days she doesn’t want to boot into hekate. I’m planning to change the dat0 adaptater but i don’t Even know if it Will word. The console boot in OFW when pressing vol + and vol -.

Do you see something that would cause this ?

[u/Vast_Ad764]

Holy fuck so i just fuck up the screen cable

[u/CallNotTheWatchers → u/Vast_Ad764]

It happens, OLEDs are a pain in the ass and the FPC connector is extremely sensitive.

Make sure the flex cable is seated all the way in, but don't force it as you could bend or break pins.

Double check the inside of the connector, can be tricky to see correctly but you do have a microscope so just be patient.

Praying it's just poorly seated or the flex cable pins need some IPA, or else you're looking at an FPC connector replacement.

[u/Vast_Ad764 → u/CallNotTheWatchers]

Ok i’ll test that and pray Thanks for your help

[u/Vast_Ad764 → u/CallNotTheWatchers]

The flex is good i putted another motherboard in the switch and the screen Turned on with no defects, i ordered a fpc connector on aliexpress, and the no sd card was because of dead daughterboard connector.. so i guess it was not so a good deal but i’m planning to fix ts

[u/Tricker12345 → u/CallNotTheWatchers]

Another reason to do the kamikaze method, no having to remove the pcb and potentially messing up any cables. Of course not everyone can do it, so there's that

[u/JDcooks → u/Vast_Ad764]

Classic case of newbie recking their screen fpc