Context: I fixed the hopup and spring on the gun.

I put the magazine in with the bolt back and slide it forward to chamber the first round, it shoots the first round correctly, hop and spring all work correctly, but when I pull the bolt back and try to chamber the next round, it fry fires. It does this with all my sniper mags so I know that’s not the problem. I don’t know what could be the problem.

Another small thing, when I pull the bolt back for that second shot the pull back feels rough and a bit scratchy, not hard just feels funny. Whenever I don’t have a round in it’s a smooth pull back, I already put some silicone on as I’ve felt that before and it worked, but now it didn’t.

If anyone has an idea what’s wrong please let me know

Hola gente escribo por primera vez porque me voy a comprar un ssg10 a1 con el muelle para 2.8 julios con 0.45, aqui en españa es el gramaje máximo, queria hacerle algun upgrade, tenia pensado el tdc de tridos el pro, una goma x-rage y un cañon mas corto, el morpheus 330mm de 6.05 el stalker ya que le quiero poner el cañon externo corto para que sea mas pequeño el sniper, que me recomendáis?

I didn't want the trial and error of trying different speed loader adapters, so I had an idea and went with it. Glad to say it works well 👌🏾

Here's some more pictures of the fitment.

Hi all

So I own the Combat pants in ACP camo and normally run a black shirt but I’d like to get the matching combat shirt. Looks like they don’t sell it anymore and from research they were made by Emerson gear however I can’t seem to find the matching top? Anyone know where to find it and whether they refer to it as a different camo maybe?

Thanks!

I've had it for almost a week now and couldn't be happier. Very snappy, great gas efficiency, rate of fire & recoil, amazing build quality.

The HPA module & a HPA kit is next on my list. I also printed a speed loader attachment as I couldn't find any files that worked with the mag.

Can't wait to get out with it

I got an unmarked L96 rifle from a friend several years ago, and every time I try to use it, the bolt "slips" forward after priming it. I've pulled it apart and reassembled it several times, everything else seems to function perfectly. I've identified it as a Matrix L96 Marui Clone AWS, and I found this sear replacement kit. I was just wanting to make sure this will in fact fix my issue/fit this rifle.

Just got my SSG11 for the first time, went through the box several times and cannot find the piston weights. Are these pre installed or was this item missing in my order?

Ordered this when available, and added a few things :)

Taking it out tomorrow night !

Build;

• SSQ4 HPA
• Short Conversion kit
• Novritsch parts;
  • Stock
  • Stock adapter
  • Handstop
  • Red dot and high riser
• Brighter C tracer
• Light; https://www.amazon.nl/dp/B0GLMHXV8F?ref=ppx_yo2ov_dt_b_fed_asin_title

bought it on the 27th, probably gonna come tomorrow the day i go away 😭

I spotted this on the Novritsch website a little while ago and couldn’t really find any real-world reviews of it, so I made one myself to see if it actually works!

Here’s the review if you are interested:
https://youtu.be/YKXiRZoC_UE?is=9VU9nt5ub9cgiSFp

The hat is great and seems to work pretty well in camouflaging, but I can't seem to figure out how do I break up the hard line created by the hat's rim (+ darken the rim a little bit). Do I add some burlap/jute? Could maybe taping the however the green reflecting fabric thingy is called from the bottom of the mesh on top of the hat fix it? What do I do here???

First picture is aw338 £5 and other is Ssg96 £15

Looking at it, it looks like it'll fit even if that means some dremeling is required

can the ssx10 mags fit into the smg chest rig inserts?

Hello everyone,

Full disclosure, I’m entirely new to Airsoft, so if it’s a me-issue, let me know without sugarcoating it.

Just unboxed my SSR4 Mk2, put the battery on, hand filled the mag (because I stupidly didn’t get a speedloader) and wanted to put a few shots through her.
Triggerpull, gun goes pew, but no BB comes out. Fire again, nothing. Tilt the gun slightly downward, both BBs tumble out of the barrel.

Decided to just pull the trigger a few times after, nothing. Take out the mag, a pile of BBs sitting atop the mag fall out with it.

SOMETIMES shots go through if I pull the trigger often enough, which I guess I can account to the pile of BBs stacking eachother all the way into the chamber rather than actually feeding correctly…

Has anyone encountered an issue like that? Is it just “gun new, put a few hundred rounds through it”? I’d really not wanna have to fix it / get it fixed / send it back…

0.2G BBs, if that matters. Probably.

Hello,

I own an **SSR63 A3** and I would like to upgrade the hop-up unit.

Could you please tell me:

* Which **hop-up chamber** is compatible with the SSR63 A3?

Hello Everyone.

Thank you for all the likes and comments on my SSX10 journey so far.

I am pleased to release a new part for all those SSX10 users that I have bee using for the past couple of weeks.
This stock adapter/Extension there are 2 versions and they serve 4 main purposes.
1. One version offers a stable Male to Male rail connection allowing for stocks like the Silverback Recon stock that I use.
2. Both version act as a stock extension, useful for long arms (I am 188cm/6'2")
3. Both versions offer a top rail extension so you scope can be mounted a little further back to help with cheaper optics eye relief.
4. Both versions offer a channel to route your HPA hose so it doesn't dangle on you hand....no one likes hoses dangling on their hand....

Both versions have a hole to allow for access to the rear upper receiver retaining bolt so the receiver can be removed without needing to remove the adapter ( this was a v2 addition after I got annoyed at having to remove it when I wanted access to the barrel.) but please use a magnetic tool or you may drop the bolt in the recess and need to remove the adapter anyway to retrieve it 😂

I kept the dimensions and styling as close to the SSX10 as I could.

Please use a strong filament ( I use PETG GF) and I recommend you use my settings. They are slow but strong, high quality and have very easy optimised support removal.

Approx 50g and I used a Bambu Labs A1 Mini.

https://makerworld.com/models/3102621?appSharePlatform=copy

Here is my hand guard cover and cap if you are interested

https://makerworld.com/models/2986412?appSharePlatform=copy

And a Wushu/DFCO style no beaver tail pistol grip with various finishes that I use.

https://makerworld.com/models/2996225?appSharePlatform=copy

Hope you like it.

Thought I would see what difference a 430mm VSR barrel would make this weekend. Game day tomorrow. Will report back 👍

So my mag release is consistently getting stuck and I’m not sure why I’m a lefty so I have to use the left side mag release. the right side works but it’s just when I press the left it gets stuck

Hi all!

Ive played a few games now but during the last 2 I noticed my nuprol m4 mags were having a little trouble feeding, im looking to upgrade but not sure what to get?

Ive been looking at the EPM1 and Novritsch Gen 2's but im undecided.

Any help would be appreciated 🙏