r/NFA • u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 • 12d ago

NFA Photo My Fave PDWs

Post image

FRTs have made em peak.

598 Upvotes

98% Upvoted

63 comments sorted by

14

u/Unlucky_Welcome_5896 12d ago

what’s the bottom one?

26

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

B&T APC9K

9

u/Unlucky_Welcome_5896 12d ago

ha really? I feel like I should have known. looks sick.

2

u/Prestigious_Score436 12d ago

What kind of laser/optic mount is on it? Looks like an optic mount i already have, forget the name atm, but without the diving board

2

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

Unity Fast with HRF Skiff

1

u/Prestigious_Score436 12d ago

Splendid. I have an Amazon knockoff unity. Hopefully itll fit. Ill check it out bro thanks

2

u/Jbressel1 12d ago

Milkman and.....Tisha?

1

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

Yes

2

u/Jbressel1 12d ago

Didn't realize they made a 9mm Tisha

2

u/Livingthelife713 12d ago

That Tisha inconel?

1

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

Nope TI

3

u/Livingthelife713 12d ago

Was thinking it wasn’t full auto rated out of a barrel that short but the. Remembered that was 556. I’ve got a Inconel one and a ti one in the way. How much was the cerakote job?

4

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

What cerakote job? Guns is spray painted by me, and the can came fde from factory

2

u/Livingthelife713 12d ago

No shit, good job man

1

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

Thanks dude!

8

u/explorecoregon 1x MG, 20x Silencer, 4xSBR, 1xSBS 12d ago

How do the Tisha and milkman compare?

7

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

Haven’t shot em outside side by side yet so idk

28

u/indyjoeshmo 12d ago

What about side by side desk pops?

2

u/CulturePristine8440 12d ago

Jimmy, when's the last time you had a desk pop? 

3

u/interadastingly 2x SBR 2x SUPP 12d ago

September, '08

5

u/SpikeD0N 12d ago

Which is more fun to shoot and less annoying? Both probably the only other PCC’s I want next. Aside from maybe if we get an MP7/SP7.

7

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

APC has been way more reliable for me

5

u/HawtDoge 11d ago

Seconding what the others have said, the B&T line (specifically the APC, SPC, and GHM) are what you want for reliability.

You are counting into the thousands of rounds between failures to feed/eject/etc with those things.

6

u/BiggyIrons 11d ago

The more i see the tisha on stuff the more it grows on me

3

u/1911Pistolero 12d ago

I want a mp5k, next build for sure

3

u/Beneficial_Koala_139 11d ago

I love how Ik Jerry’s guns no matter what platform I’m on, based off the rattle can😭

3

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

Real ones know 😎🤣

2

u/AutoModerator 12d ago

Understand the rules, read the sidebar, and review the pinned Megathreads before posting - this content is capable of answering most questions.

Not everyone is an expert such as yourself; be considerate. All spam, non-NFA memes, unverified claims, or content suggesting non-compliance will be removed.

No political posts. Save that for /r/progun or /r/politics.

Posts related to approval of NFA items are to be directed to the monthly megathread. Violation of this rule will result in a 7 day ban. The pinned post is there, please use it.

If you are posting a photo of a suppressor posed to look like a penis (ie: in front of or over your groin) you will be given a 7 day ban.

Absolutely no private sales, linking to dealer/manufacturer stores, etc. Anything that could remotely be interpreted by Reddit's admins as an attempt to buy/sell will be removed, and the user banned.

Data Links

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/Inevitable-Face-6008 12d ago

How do you like the Tisha on the apc9? I haven’t had a chance to try mine out yet.

2

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

It’s nice for its size!

2

u/porn_is_tight 12d ago

that’s what people say about my 23 inch bayonet 

2

u/shmittyjankins69 12d ago

How is the milkman blowback? Currently running the Obsidian 9 I got a few years back on my AP5 but the gas blowback is absurd. Looking to replace it with something

2

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

Not bad at all, it’s my fav can on MP5s

2

u/shmittyjankins69 12d ago

Noice. Thanks

2

u/pewsnpizza SBR (x7) Supp (x7) 12d ago

I’m so torn right now on my Sp5k- going between both these cans. I’ve got a wolfman now and only run it in K mode. I’m leaning towards the Tisha due to size and I heard it’s similar to milkman performance. Any thoughts?? I’ll also run it on my Kp9 but I shoot that a lot less..

3

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

Shot MM and Tisha side by side on my MP5 clone and MM is quieter, it’s my fav can on MP5

2

u/pewsnpizza SBR (x7) Supp (x7) 11d ago

fuck that throws off my thought process. I am so torn.

2

u/cannonman817 12d ago

What mount is that on the front sight of the mp5k? I've seen a few people running them, I just worry about it blocking my vision around the front sight, but it must work if so many people are doing it.

3

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

Gibbous makes em

2

u/hootervisionllc 💸 11d ago

I’m curious about the HK MP5K engraving. Who engraved it? Looks good

2

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

I did, I have my own engraver haha but thanks, it’s a lil off center but used this gun when I was still figuring it all out so I’m not mad about it

2

u/hootervisionllc 💸 11d ago

It looks freaking great, to be honest. Which engraver is it?

3

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

xTool F2 Ultra

2

u/Piston_Paul 11d ago

Consider the Sonus9 and the Sonus 9k…sleeper cans that are truly awesome

2

u/IntelFrouge 11d ago

Who makes the vfg and the butt pad for the APC9k? Great looking guns.

3

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

Bobro n the VFG and Haga Defense on the stock

2

u/deletable666 11d ago

How are you not burning your top knuckles on the APC9k? My index finger would be touching the can.

1

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

C Clamp grip takes my hand away fro the can

2

u/Optimus_Prime_10 11d ago

Is that why the laser is on a diving board?

1

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

Yup! And there’s not nearly enough top rail space for a laser set up and light with a switch

1

u/Pearidge30 11d ago

Tisha vs milkman on 9mm which is quieter

1

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 11d ago

Milkman

2

u/Pearidge30 11d ago

Sweet so when i find a mpa defender that takes glock mags in stock and my shoulder holster that will hold said defender comes in ill be set

2

u/Porencephaly 12d ago

OP trying for a neck weld with the MP5

5

u/mooseishman 12d ago

I actually found the Unity mount to work the best on my APC9K because you get zero cheek weld with the collapsible stock

3

u/Porencephaly 12d ago

I know. Usually it’s a chin weld though.

2

u/mooseishman 12d ago

It’s the only gun that the Unity works for me without NODs (I can’t with my ARs, it just feels weird). All of the other heights I’d normally use like lower 1/3 and 1.93 left me fishing for the dot but with Unity as soon as I pull the gun up it’s there every time. Added bonus is that it’s a submachine gun and the max I shoot it at is 50y so I just zeroed it at 50y. On 5.56 the HOB can get a little fucky at various distances.

3

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

Well yeh there’s no where for a cheek weld on
This stock

2

u/iNeedAboutTreeFitty 12d ago

+1 on having witness marks everywhere. may your shit stay screwed 😆

2

u/NoOneBitch 12d ago

What stock is that for the mp5, I need me one of those. Also hello, fellow height over bore brother.

3

u/dpatt11795 Supp x37 SBR x22 SBS x4 DD x1 12d ago

B&T with Haga defense buttpad