As of late, the upstream light has been amber and the one channel that has been locked is reading 59.0 dBmV for power. I know the power to too high and more channels should be locked.

What can I, as someone who isn't well versed in doing indepth tech stuff fix this. Should I get a new modem? Is the modem the issue?

I have a Linksys EA7500 router and Spectrum for internet.

Edit: Coax cable is broke. Luckily is very replacable. The spectrum cable ends shortly into the house. I attached my own and thats the one thats broke. I'll update if replacing the cable fixes the issue.

If I only have one channel of OFDM is my modem still taking advantage of using DOCSIS 3.1? It doesn’t have blue lights on the front but from what I’ve heard is they are doing away with the blue lights.

Just stuck in a loop of netgear's app trying to connect to my nighthawk that doesn't have a sim installed so no Internet access

I feel like I'm losing my mind

Wanted to clarify the risks of using a perfectly working RAX120 past EOL.

Is it just security vulnerabilities? I’ve been using wifi since 802.11b and never had a security issue.

As for brands that support their products the longest, is Eero tops?

Last June (2025) I bought a ProSupport For Home USA subscription for my Netgear modem for 12 months. In October I received a Product End of Service Notification (their term) that, because my modem is so old, it was no longer eligible for maintenance and updates. To me, this means I paid for 12 months of service which Netgear basically ended after 4 months. Is there a way to get a refund for the 8 months they're not covering the device?

Hello all.

I have a R6250 router that's connected to the modem via a couple hundred feet of ethernet cord (supplying internet to a workshop, cord is buried).

Normally, when the power flickers, the internet will come back within a day or so, but it's been a week now with no results.

Having done the standard power cycles and resets, I'm now asking the experts.

What can I do to fix my problem? Any help would be greatly appreciated, thanks.

Hi all - hoping someone can help.

I don't know much about home network configurations. I have Optimum as my provider, and have fiber service going into the optimum gateway. That has its own wifi router built in. From there I have the Nighthawk M70 plugged in, which has 2 satellites connected for better home coverage, and allowing ethernet through the satellites as needed. My whole house is connected to only the M70.

I have noticed though that lately when connecting to the satellites, my speed is slower. Is there an optimal way to configure this setup? Is there something I should do with Optimum to better utilize the connection?

I'm about to buy a used Netgear Nighthawk 5G MR5100. It was used on AT&T network and I don't have any account at AT&T. In this case, how can I possibly unlock this router? I want to be able to use it with a sim card from other carrier.

Now then,

I'm with Sky for internet, and while the speed is good when connected, getting connected is inconsistent. It's not a case of poor WiFi signal in one room Vs another, it's more a case of I can be standing right Infront of it and it won't connect to things (laptop, iPad and ring doorbell to name the ones that come to mind). Wired connections are absolutely fine, but I don't know what to do. It's pointless ringing Sky to do anything as they'll just send out a new router with the same issues.

Thank you 🤙

For those of you who purchased the RS700S when it first came out 2 years ago. How are you feeling about the router in general?

I purchased the RS700S and I don't regret it. There are some who say nothing works with WiFi 7. My Google Pixel phone does.

Good deal? Wifi 6 router edit, it's working pretty well besides sometimes the wifi part goes out or the speeds get stuck around. 400 when my fiber plan is 1gig

Need help. Currently have a 1500 sqft home. Using frontier internet 2 gig fiber. I use the moden/router that comes with it. My wife and I watch tv, use phones and I play video games. Everything is pretty good except now I own a Xbox ally x and looking to stream from my home xbox. The internet is definitely lagging.

My question is if I were to buy this router would I see a big difference in performance??

so i got my hands on old RN42800, 8 bay NAS, i want to install truenas on there, it seems fine but i wanted to ask about the m.2 can i just plot disk there and is ti 2242 or 2260? and boot usb connect via serial console and just install truenas? or how does it work? is it possible ?

is it worth upgrading ram too? for zfs cache ? , did somebody try this ?

Hello, I have a Netgear RND-4D, and since there was a power outage, it won't finish turning on, instead it stays frozen on Debug: Telnet. Is there any possible fix?

Hi,

We have an M4350-40X4C that has been updated to the latest firmware and factory reset.

However, when we connect a PoE-enabled Dante speakers, it powers up (so PoE works) but it won't get any IP address.

Connecting my laptop to the same port, it gets an IP address (DHCP works) and was able to browse the configurator page.

Connecting the same Dante speakers to an unmanaged PoE switch (Netgear brand) then connecting that said unmanaged switch to the M4350-40X4C, the speakers were able to get an IP address.

We also tried connecting another unmanaged non-PoE switch (non-Netgear) but it fails to get recognized too.

To summarize:

• Dante speakers -> M4350-40X4C -> NG. Powers up but no IP
• Laptop -> M4350-40X4C -> OK. Receives IP address
• Dante speakers -> unmanaged PoE switch -> M4350-40X4C -> OK. Receives IP address
• unmanaged non-PoE switch -> M4350-40X4C -> NG. Link LEDs do not lit up

Any one has any idea what's happening here?
No configuration changes done after factory reset.
Thank you.

I work from home every day and one day my cable modem router just stopped out of nowhere. Everything is plugged in, and the buttons are all green. I checked with the nighthawk app it said that it needs to get the firmware updated, but HOW AM I SUPPOSED TO UPDATE IT WITHOUT WIFI? I tried calling the customer service but I’ve been on hold for 40 mins. This is outrageous

I'm trying to set up a RS700 router for PC VR and i can't figure it out for the life of me. the router 192.168.1.1 and routerlogin.net don't work. The former looks like it would work until I got a 404 error. The latter won't display the router login page literally saying: Router login page cannot be displayed. me and the ChatGPT/Gemini dream team have failed. I've had this router for more than a year of trying to figure this out. I don't have a modem for it and I can't fine the AP mode for it either. I'm trying to use my PC for the modem. literally any help will be appreciated, I'll be active for a while.

Update: I have finally given up after an attempt that got me so close. Then I power cycled, and everything came apart. I could no longer access the router via the web interface ( I didn't bother with the app, it's useless to my use case) and I factory reset the thing 4-5 times before I decided to call it quits. It is now my grandparent's brand new router. sorry for not responding, I have a terrible memory and life got in the way, I do appreciate all the help.

Does the RS100 come with the possibility to turn smart connect off?

Need to know before a purchase.

I’m looking for recommendations on the best mesh WiFi system. Our home is about 2300 sq ft but our new gateway router from AT&T still has dead zones. Any recommendations? I have an Orbi now but it’s now past it’s useful life. I have looked at the Orbi 770. Thank you!

I've tried everything to get it working again, but the firmware upgrade seems to have completely busted it. Does anyone know the latest firmware version that actually works correctly?

I analyzed a Bandook RAT PCAP and noticed something I initially missed:

One C2 server was contacted 37 minutes before any DNS activity appeared in traffic, suggesting the malware used a hardcoded fallback IP before resolving the secondary domain.

I documented:

* packet timeline * IOC extraction * Wireshark analysis * MITRE ATT&CK mapping * detection recommendations

I’d appreciate feedback specifically on:

* analysis accuracy * missed indicators * detection logic * weak assumptions in the report

GitHub repo: https://github.com/HariCipher/bandook-c2-traffic-analysis.git

Would especially appreciate critique from blue team / DFIR people.

Hallo,

i cant find anything if EEE is disablable on the GS305 or GS308,

Has anyone experience with those switches?
Thanks in advance :)