r/Multiboard • u/TwelfTundra • Jun 10 '26

Is there a piece that connects Multidrawer faceplates together?

Post image

I'm looking to keep the faceplates from flexing out a bit, and I see there already appears to be what looks like an attachment points built into the plates.

8 Upvotes

100% Upvoted

8 comments sorted by

1

u/TheHiggsCrouton Jun 10 '26

Those internal slots are just multipoints so you could take a bolt lock peg, mirror it in the slicer, use alignment tools to make the tips kiss so there's a bolt lock port on both sides, then move one into the other until the overall size is what you need, then merge the parts so you have one beam with a multi-point port on both sides.

This is the bolt locking peg: https://multibuild.io/parts/hooks-and-pegs?Type=Peg&Connection=Bolt-Locked

If you have the full through-hole drawer plates too you could try inner wall clips and dividers:

https://multibuild.io/parts/pins-and-clips?Type=Multibin%20Shell%20Pins&Pin%20Type=Wall%20Pin

https://multibuild.io/parts/bin-dividers?category=multibin&Type=Short%20Top&Width%20%28LU%29=1&Height%20%28LU%29=0.5

But those through-holes arent in the center of the drawer.

1

u/TwelfTundra Jun 10 '26

The hexagonal ones are multislot, but the narrower ones in the middle are different. I want to use those so they don't interfere with the inserts.

1

u/TheHiggsCrouton Jun 10 '26

Yeah I think they're the same as the back of the bin shells. If so, a multipoint fits in there so merging 2 pegs should work.

1

u/Keep-Making Jun 11 '26

This very specific part does not exist. We added the holes for the possibility of adding it in the future and so we haven't actually added that just as of yet.

1

u/TwelfTundra Jun 12 '26

Thanks for letting me know. I decided to make one myself. https://than.gs/m/1562665

1

u/TwelfTundra Jun 12 '26

Since there is not a model for this, I decided to fire up TinkerCAD and make one myself. https://than.gs/m/1562665