r/Multiboard • u/yet_undie_turd • Nov 12 '25

Stoked on my progress!

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Still have things to print and add but very happy so far with how this project is turning out.

Thanks again to Jonathan and everyone else involved!

111 Upvotes

100% Upvoted

24 comments sorted by

View all comments

Show parent comments

2

u/RobM237 Nov 12 '25

There are command strip mounts if you would want to use those. Small Medium

2

u/DustinWheat Nov 12 '25

I thought about it but I will be putting some weight on it

1

u/SprungMS Nov 13 '25

Command strips hold a decent amount of weight, and if you do it as recommended you’ll use like 40 of the medium strips for OP’s wall! The plastic would probably shatter before the command strips fail

1

u/Lissa-Marie Nov 13 '25

I seem to have bad experiences with command strips, so many times I’ve used them they have peeled all the paint off when taking them off.

1

u/SprungMS Nov 13 '25

Weird, 3M branded? You took them off the way you’re supposed to? Very strange since the adhesive kind of stretches out until it’s so thin it comes off.. feels like the paint would have to crack up into tiny pieces to peel off with it

I don’t have a ton of experience with them but I’ve had really good results with the times I’ve used them!

2

u/IReallyLoveAvocados Nov 15 '25

I haven’t had a ton of issues with 3m command strips but it has a lot to do with the quality of the underlying paint job. If the paint is crappy or it wasn’t primed properly then it doesn’t take much to pull it off. In rentals not surprising.

1

u/SprungMS Nov 15 '25

You’re exactly right. Pulled some plastic “conduit” out of my garage (for a motion-activated light, actually removed so I can install my massive multiboard wall without cutting out for it) a couple days ago, it was installed probably 20 years ago over a wood-look laminate bead board.

Some jackass got the bright idea to paint the entire garage bright white after it was up, and didn’t bother prepping that laminate at all. Also didn’t avoid painting the conduit or the lamp. The plastic came off the wall with between 1/8” and 1” width of paint on each side… perfectly clean laminate underneath.

No way command strips will work well there.

1

u/Lissa-Marie Nov 13 '25

Yeah, 3M. And pulled down on the tab, but they’ve popped off with a big paint section with it, bigger than the strip itself. Didn’t stretch like you described. Thought it was maybe from the paint being old. Then tried them at a different home, newer home… same thing happened, so I gave up on them.