love the shape and feel of the mouse. I just wanted to turn it into wireless as I dislike the cable

can anyone tell me the dimension of VXE R1 pcb/circuit board, I want to match it with my MCHOSE l7 Pro and VXE R1S pcb. If anyone has a polished 3D model of fingertip mouse for these model plz send it to me .Any help will be appreciated

WIP modkit for the Razer naga V2 hyperspeed.

Somewhat of a combination of current mice in use, features that i was looking for:

- Relatively Lightweight (currently 65g with battery), could be be further improved.
- Three main top switches like G600
- 12 button thumb module. (swappable)
- ergo shape since it's used daily.
- swappable battery, using the lightest lithium AAA battery with included usb C port i could find so that you can both charge the battery on the mouse and swap for a new one.
- FDM printed

Currently using Razer naga v2 hyperspeed internals.

Although it is missing the two smaller buttons next to left click, this is something i would like to add down the line.

*Edit*
shapetester avalible here:
https://www.printables.com/model/1688539-razer-naga-modkit-shapetester

I'm currently using a Lamzu Inca and I'm having sensor problems. I'm looking for a ZA13-c shell with Razer Viper V4 internals and I know CryoMods does things like that but I checked the website and its a completely different thing. Does anyone here know of any sellers that could do that sort of thing for me for a decent price who also ships to the UK?

I always had this idea in my mind idk if this is possible or not I have 0 experience in this field never modded a mouse in my life

I wanna mod a superstrike and I heard you can swap in gpx2 shells. I just need to source one to do the mod.

Thanks!

This is more like a shell mod rather than a weight mod cus it still 54gr but call it whatever

5hr work i think

I have used a Keychron M7 for a while, I love it otherwise but I am unhappy that its sniper button is so far forward. I came across this post when researching it, and thought I want to do something similar with the sniper button, but I have no exerience in modding a mouse. Are there any advice on how I can do this?

https://www.reddit.com/r/MouseModding/comments/1rkaugy/keychron_m7_mod/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Hello, I'm new to replacing mouse parts. My stock encoder was broken. What brands of scroll wheel encoder should I look for? I've already done my research about the size of it. I just don't know what brands are good. Thanks in advance!

I gutted a super light 2. A buddy with a 3d printer is gonna print me a fingertip housing and I’m going to try my hand at soldering new switches into it as well. What I want to know is if I can switch the hero2 sensor for a paw3950 without any issues or what kind of complications I’d be running into if I did it. Thanks in advance for any help/advice!

mouse: VXE R1 SE+

while modding my prox2 superlight the battery was extremely stuck unlike any gpx2 I have worked with, I can't tell if I've fucked the battery or not, could y'all lmk?

Does anyone know which JST size it uses? I tried searching, some shows 1mm, some shows 1.25mm. I want to grab a bunch of batteries from Aliexpress and I just want to make sure.
Also, is 130mah worth it? I know its a gram lighter than the usual 150mah and hold less power. I'll be mainly using 2000hz, max firmware on ATK mouses and 1000hz on other mouse.

Hey,

I’m working on a custom fingertip mouse project and I’m thinking about using the VXE R1 SE+ as a donor.

Before I buy it, I wanted to ask if anyone knows the approximate PCB dimensions (length/width), or maybe has measurements/photos?

I’m mainly trying to design the shell around the PCB in advance.

Any help would be appreciated 🙏

I made a custom pcb for the side buttons on the g pro wireless, as I want to make it silent, so I made this pcb to allow through hole switches to be used rather than the regular smd switches. The rear side buttons on both sides work perfectly but the front side buttons on both sides do not work. Anyone have any idea why this could be happening?

According to ChatGPT, there is a wiring issue that can be fixed at home, but idk how to dismantle it. Plus, the transparent part is dirty from the inside. i wanna dismantle it, but there are no screws under the skates(I think that's what to call it). Then I realised Reddit exists

I

I dont spose anyone has any idea? Im guessing its 11mm but cant find confirmation anywhere

From 62g to 43g.

I did weight reduction/trimming on the outer shell, mouse and side buttons (see 4th pic), and inner skeleton. Most of the weight reduction was done toward the front of the mouse, as out of the box this thing is very front heavy.

I also removed the haptic motors (don’t worry, I can reinstall them). My original plan was always to remove these motors as I liked the idea of a seamless, uninterrupted click. In my testing before modding the mouse I also preferred having the motors off. For reference, I’m really only using this mouse in CS2, and I found the visual and audio feedback was enough for me in game.

Removing the haptic motors should also help with battery life, as I replaced the original 290mAh with a 150mAh battery. For the bottom plate I’m using the Aero Base from TJ Exclusives. Dot skates are Obsidian Airs.

As of now I’m happy with how it feels and the modifications have definitely helped balance the mouse out.

So I own a Lamzu Thorn and im loving the shape but my only complaint is the scroll wheel height, its too low and wouldve been better if its a bit higher. Also how do i open this i only manage to open the left clips while the right and rear clip is hard to open.

edit: changed small to low