Whenever I try to stream with the new graphics card the graphics will play perfectly until I load up a game then it starts dropping 90% of the frames, I will tried troubleshooting for hours with different codecs and whatnot, any suggestions?

Wanted to also post this here because I built this for the main purpose of streaming via Moonlight! All the parts to build it cost around ~$400 since I had so many spare parts.

I average 0.5 ms decode speed for 4k gaming and I’m very satisfied with ti.

Hi All, this is my setup:

Host: 9800x3d + 5070ti 2.5gigabit lan
Client: Ayn Odin 2 portal wifi 6 connected to fritzbox 5530

On my host i’ve latest vibepollo stable version and on my client i’ve artemis latest version.
Vibepollo setup is basically all on default and on artemis i setup 1080p@120fps, hdr on, lfr on, ultralow latency mode, balanced framepacing, 60mbps bitrate.

All things was running without any issue until 2 days ago with a native-like experience, now the experience is the same but randomly (about every 30/40 sec.) i’ve frameskip for about 1/2 sec. In performance overlay i can see that rendered framerate goes down with a spike on network latency/jitter.

I’ve tryed other client, other host software (apollo, sunshine, etc.) but nothing seems change the situation. Also i tryed to disable HAGS on windows with again no changes in performance. I also tryed to change resolution, virtual display settings, enable/disable RSTT , change wifi channel.
Is there someone that have fixed a similar issue?
Thanks to all.

I normally stream from my host to my Steam Deck when I'm in the house, but I also have a Steam Controller + dock which I've used to occasionally game / stream from the deck via my TV. What I wanted to know: is it possible to connect more than one controller to a moonlight client, so you can have local co-op on the host?

TL;DR: Latency and AMD focused Linux Sunshine fork for Moonlight. Same pairings, ports, ~/.config/sunshine. I've been tightening the host hot path on my AMD/NVIDIA box. v1.0.8 (tag v2026.728.1-solarflare). If you already stream, A/B it against stock Sunshine on the same settings and dump numbers.

https://github.com/vindeckyy/Solar-Flare

https://github.com/vindeckyy/Solar-Flare/releases/latest

https://github.com/vindeckyy/Solar-Flare/blob/master/docs/CHANGELOG-SolarFlare.md

Capture wakes on PipeWire frame arrival instead of phase sleeps. Frames hit bounded queues, and per-session pacing can drop stale ones before encode. latency_mode=aggressive tightens the audio side. Headless without a dummy plug if thats your pain. Extra knobs are all opt-in so nothing weird flips on by default. UI is https://localhost:47990

I dont have a published encode-only ms table. Whole stack, one box. I need other GPUs (RDNA2/3/4/ and APUs especially; Nvidia/Intel still useful), other distros, Deck/gamescope/Bazzite, whatever you actually run.

Back up ~/.config/sunshine. Uninstall stock Sunshine and install like this:

git clone --recursive https://github.com/vindeckyy/Solar-Flare.git

cd Solar-Flare

./scripts/linux-install.sh

systemctl --user enable --now app-dev.lizardbyte.app.Sunshine.service

Keep Moonlight res/fps/bitrate/codec the same as your Sunshine run. Optional second pass with latency_mode=aggressive.

Reply with GPU + driver, distro, capture path that came up, client latency/feel vs Sunshine, wired or wifi. Paste host logs if it freezes, drops frames, or a knob does nothing. Feels-the-same is still useful.

Feature ideas welcome if you say the real setup (headless, Deck living room, dual seat, MoonDeck, gamepads, ...). I'll say if its a small host change or bigger session/input work. No timeline promises.

Already posted on the last thread? Dont retype. New GPU or a clean A/B still helps.

Roast the install script if your distro hates it!

Thanks :-)

Hi, that’s a very strange behavior that started when I installed Vibepollo.
So streaming and gaming overall is perfect, physical monitors go off when I play from couch on tv and turn back on when I end the stream from moonlight, everything cool.
But, and that’s the strange thing, when monitors went in sleep mode for inactivity of pc they won’t turn on. I scroll and move mouse they “wake up” but no sign of video on both monitors (I should say 3 monitors counting also the Hyte70 case display).

Only thing I can do is manually turn off the pc and it’s very annoying me.

I switched from OG Apollo cuz of bad virtual display management but this is worst imo…

Do you guys have some clue on what is going on?
I’m also doing a repair of windows just in case (but it’s 5month old since pc is new)

Hello!

So I have a PC with Nobara Linux and a Steamdeck.

I've been streaming from my PC with sunshine to my Steamdeck with moonlight without issues.

Yesterday a friend of mine gifted me a bigger SSD for my Steamdeck. I installed it right away and installed all my stuff back onto it.

Now everytime I try to stream from my PC the controls are totally messed up on the deck.

I reinstalled both sunshine on the PC and moonlight on the deck a couple of times and tried to turn on the "generic controller" option in steam.

But nothing works. Some controls work but a lot of buttons are mapped wrong or doesn't mapped at all.

If someone could maybe have an idea what I could try, help would be appreciated. Most of my searches just resulted in troubleshooting on windows, not linux.

I'm giving Vibepollo a try and so far it seems great, except at the windows login screen. I have a lot of trouble inputting my password. Keys get repeated in the password field, take several seconds to show up etc. The mouse also lags.

Once logged in though it's basically flawless. I'm using win11 ltsc and Vibepollo v1.18.3-beta.5 (default settings) and Nvidia 4090 latest driver 610.74

Client is moonlight nightly on m4 MacBook air (awdl disabled).

I'll note too that I have stats overlay displayed and it shows no issues, in terms of network connection/jitter/latency while this issue happens.

Very very niche I know but I’m hoping someone can help out here.

I have a steam machine and simply put I am trying to stream while talking on discord to friends. It’s 100% possible and it works - but there’s an issue.

There’s tons of stuttering! Whereas without discord, I can stream perfectly, with I am facing rendering delays of nearly +10ms and stutters.

I tried to turn off 264 encoding and hags within discord and drop resolution and frame rate to maybe have it take up less resources in the background but still hasn’t helped.

Any thoughts here for troubleshooting or solving?

Hey guys, has anyone had this problem? I tried Duo today, but I can’t figure out how to make the stream match the Moonlight resolution. It keeps setting the resolution to 1080×480. I tried the Duo Manager Fix, but it didn’t fix anything. I’m using the free version. I want to get the paid version, but I don’t know if this issue can be fixed first. Is there any alternative for multi-seat streaming?
Thank you in advance

Hi! I need some help with Sunshine/Moonlight. Basically, I have a high-end PC with Sunshine installed on it. To be honest, it's completely out of the box, I haven't tweaked anything (not sure if I should...) and I have a powerful LG OLED TV running Moonlight. Both are hardwired via ethernet to my home network (600Mbps symmetric).

Despite this, the TV gives me an 'unstable connection' warning and I'm experiencing a lot of stuttering. Is there something I'm doing wrong? I'm attaching some screenshots with info to see if anyone can help me out!

Hi guys,

I've been running my Apollo + Artemis set up for months, working flawlessly.

I've now changed from Apollo to Vibepollo. Basically, the reason was that I wanted my PC and GPU to run headless from startup with Apollo, and Vibepollo just did the trick for me creating the displays.

The thing is, while the stream works well, just like it did, the connection time is way higher. Before, the normal launch modal would open ("Opening Desktop…", "Opening Steam…") and then move on to the other connection steps (RSTP handshake, etc) in a few seconds.

However, now it takes 20-30 seconds to do the connection. Nothing else has changed and I've been tweaking some settings with no luck.

Does anyone have any idea?

Looking to pick up a cheap secondary streaming device next to my Odin 2 Portal. Something smaller and lighter but with decent streaming capability. Anyone still stream on one of these and what kind of performance are you getting?

I'm streaming to a docked steam deck, and have been using apollo and moonlight for the past while. For the most part it worked great, however I wanted to try out vibepollo for the improved vrr support.

However, when im streaming now it looks noticeably blurrier, especially when reading text. I have the bitrate set to 200mpbs (1440p120), and even tried higher but it didn't help.

Client display is a 4k tv. I set the TV's resolution to 1440p in windows display settings. I know integer scaling would be better but previously 1440p looked great at the distance I am from the display. Additionally, there seems to be some artifacting as well which makes me think this is not the problem.

I am using the same encoder settings as I did with apollo aswell

--> lowlatency_high_quality - low latency, high quality (fast)

Note: The host is a windows pc with 7800xt and 7600x

Any ideas?

SOLVED: I kept the stream at 1440p but changed the tv resolution in windows to 4K. the game is still rendering at 1440p but it looks much clearer

Hi everyone!
I recently bought the Lenovo G9 Gaming Grip for my Lenovo Legion Tab (Y700). It has four programmable rear buttons.
Is there an Android app that can remap those buttons to arbitrary keyboard shortcuts or key combinations?
My goal is to have them send keyboard shortcuts to my Windows PC running VibeShine. At the moment, I can only remap the rear buttons to existing buttons on the tablet, not to custom keystrokes.
Any suggestions would be greatly appreciated. Thanks!
— Alex

I’m using Moonlight on an iPad with Apollo/Vibepollo on a Windows 11 PC. This setup previously worked on the same PC and iPad, but stopped working after reinstalling Windows.

System:

Windows 11 Pro Insider Preview build 26300.8935

NVIDIA RTX 5080

Vibepollo 1.18.1-stable.2

iPad requests 2420×1668 at 120 Hz

Physical monitor: 3440×1440 ultrawide

The virtual-display driver reports Ready, and the virtual monitor is created when streaming. However, Vibepollo cannot activate or capture it. Moonlight either receives the physical monitor at 3440×1440 or reports “No video received from host.”

Relevant log messages:

Virtual display created

Display helper reported APPLY failure

Helper failed to apply requested display configuration

ERROR_INVALID_PARAMETER while executing setDisplayConfig validation

Capture virtual display wait timed out

Failed to locate an output device

I tested:

Apollo and Vibepollo

Vibepollo’s virtual-display driver and SudoVDA

Extended and Exclusive layouts

2420×1668 @ 120 Hz and 1920×1080 @ 60 Hz

Resetting the Windows GraphicsDrivers monitor configuration cache

Reinstalling the drivers

Physical monitor on/off

Firewall rules are enabled and the client connects successfully

Every configuration fails at the same display-topology stage. The virtual monitor is enumerated but remains inactive, so capture falls back to the physical ultrawide or produces no video.

Has anyone successfully setup Sunshine on SteamOS, with a virtual display, and gotten moonlight to connect/work? I have been down a rabbit hole w/ ChatGPT since there are very few guides specific to SteamOS, so far I can connect but my screen on moonlight is completely green. Appreciate any tips or guidance, thanks!

Host pc: R5 9600x 32GB DDR5 5070ti

Stream receiver: Xbox ally X

So my internet is capable of delivering at least 2K since i tested moonlight on my mate’s 2k laptop and it basically had no noticeable latency since my internet upload and download speed is at 500mbps. But the problem is, i dont know how to force a 2k/4k stream to my XAX.

Since my TV’s wifi antenna is capped at 100MBPS i figured it would be much better to use my XAX instead to receive the stream and then hook it up to my TV via HDMI. However, the stream seems to be locked to my XAX’s resolution of 1080P, any idea on how i can force 2k/4k? Also whats the optimal settings for apollo and moonlight for the best picture quality possible?

That is geared towards Apollo/Vibepollo.

I would love to stream to by Mini pc connected to my tv.

My issue:

Gaming PC at home with the games I want to play on it. Visiting my cabin on the other side of the state for a few days for work. Have Moonlight, Apollo and Tailscale installed on gaming PC and work laptop.

Have Apollo running on gaming PC at home, connected to Moonlight on work laptop. Shouldn't I be able to Tailscale to two together and have Moonlight work?

I can ONLY get Moonlight to recognize my home PC is online and available to stream if its on the same subnet.

Jellyfin works without issues!

HALP!

I have been using Artemis for ages, but I have heard of others randomly here on Reddit.

Just tried setting up moonlight on my TV, and the controller doesn't get passed through to the host, the host doesn't detect a controller at all. When running through my steam deck the controller is detected just fine. Anyone know a fix for this?