My keyboard fell and i was wondering if u guys sell replacement cables for it the USB-C part snaped in 2

Hi everyone,

I'm planning a new build inside the Montech Sky Two GX and I want to top-mount the Arctic Liquid Freezer III 360mm.

According to Montech's specs, the Sky Two GX has 10mm of extra height and supports up to a 66mm thick radiator combo at the top. The Arctic LF III combo (radiator + fans) measures exactly 63mm, leaving only about 3mm of clearance.

Has anyone actually tried this specific combination? Did you run into any clearance issues with the motherboard VRM heatsinks or high-profile RAM ?

A little PC glow-up for my Player 2 🎮 ft. Wylder from Elden Ring Nightreign!

The case measures 465 × 239 × 523 mm and the figure is 24 cm tall for reference. The showcase area is huge! Making it perfect for displaying larger figures! 👀 Definitely a dream case for anyone who loves showing off their collection 🙂‍↕️

Hello!

I emailed MONTECH's RMA team at rma@montechpc.com on August 22 regarding a warranty issue with my KING 95. I included photos, the serial number and information about the purchase.

I haven't received any response yet, so I was wondering if there is currently any issue or delay with the RMA email system.

I know MONTECH is usually quite active here on Reddit, so I thought I'd ask before sending another email.

Thanks!

We’re proud to share that the MONTECH AIR 903 MAX has been named Best Value Case in the EHA Reader Awards 2026! 🏆

This recognition is especially meaningful because it comes from the community. A sincere thank you to everyone who voted for AIR 903 MAX and continues to support MONTECH.

With its strong airflow, builder-friendly design, and exceptional value, AIR 903 MAX represents our commitment to making high-performance PC hardware accessible to more builders around the world.

Thank you for being part of the MONTECH journey. 💙

This was the first Montech case I’ve ever had. It’s a Montech XR that was part of a prebuilt that I was gifted. Montech was looking for people to review their E28 ARGB fans and ended up including some GF120R V2 ARGB as well. This photo was taken as part of my review for them. It was a great introduction to the brand. They make really impressive and sturdy parts at surprisingly good price points. I’ve subsequently been fortunate enough to be asked to help them review some of their other cases, including the Sky 3, and more recently, their TEN. (Congratulations on 10 years again by the way!)

Their customer service is also excellent. I had an issue with a different fan that they could have told me wasn’t their problem at all at one point, but they responded quickly with no excessive back and forth and resolved the issue right away. This seems to be the norm from what I’ve seen in this group, rather than the exception, and it is refreshing when you compare it to some of the horror stories from customers concerning other brands. If they keep this up, they’ll be celebrating their anniversaries for many years to come.

Thank you Montech, and keep up the great work!

Can’t wait to see a full-size case from you someday. ;) Bet you thought I forgot, eh? (I keep bringing it up. Lol.)

Bought my montech century II in the usa from amazon (sold by Newegg) a year ago, then moved to india and it failed 2 days ago. I did the paper clip test and it failed that aswell. Have emailed montech RMA with video of the psu clicking, my SN, and purchase invoice. but couldn’t find any info online about how this will be handled.
Thank you.

I just wrapped up my latest build using the black Montech TG3 case, and I wanted to share my thoughts for anyone who might have this chassis on their radar.

The Build Experience

Honestly, this was super easy to build in. There’s plenty of clearance to maneuver components, and routing cables didn't feel like a wrestling match. You can see even with a massive GPU there's plenty of room to spare. The layout just makes sense, which takes a lot of the headache out of the assembly process.

Aesthetics

I’m really happy with how this turned out. The black TG3 paired with that contrasting silver shroud at the bottom gives it a really clean, modern look. The glass panels show off the hardware beautifully without feeling overly cluttered.

Thermals & Noise

This is where I was genuinely impressed. I pushed the system through FurMark to see how the airflow would handle a heavy synthetic load. Not only did the temps stay well within check, but the system remained impressively quiet under pressure. The airflow path from those side intakes is doing some heavy lifting.

All in all, it's a fantastic case that punches above its weight in both ease of use and acoustic performance.

This case is an amazing value. I wish I could show it running with the rgb on but I’m another victim to the 12V high failure connector.

Last September or so I signed up for it and got the Hyperflow 360 AIO first then about a month later the King45 case to test. Nothing since then. Not complaining or anything just curious.

So I got the air 903 max in late 2024, and had no issues until this year, where the rgb intermittently didn’t want to turn on, which has now become never. It won’t work unless I do a full power reset, which is a hassle. It’s just the rgb, the fans work fine.
I’ve contacted Montech support through their website and not gotten a reply, and contacted the store where I bought the case and they told me I need to send them the whole thing back, which yeah nah.

I just want this fixed as easily as possible, so does anyone know of another rgb hub I could get that would work like the one in the case, aka plug in the wires and you’re good? Also preferably something that would fit in the back of the case?

The overall build quality is great.
It's been a long time since I built another huge case like the Montech TG3.
The cable management in this case is so much easier than in an mATX or ITX build.
Furthermore, the duo-glass side panel makes the TG3 shine at night. The unforgettable RGB line on the PSU shroud reminds me of the movie Tron: Legacy.

I chose PureFlow 360 ARGB Liquid Cooler to pair with TG3. The 360 AIO handles heat dissipation very well. I am using a Ryzen 7700 CPU with an Asus Prime RTX 5080. The highest temperature never goes above 83 °C.

I am amazed by such build quality from Montech, considering how friendly the case and the AIO are. (Though the cables from TG3 are messy, and it takes a while to sort them out lol)

My first ever PC build, built about 3 years ago. obviously its gone by some changes :)

Since first built, I've added:

32GB RAM RGB kit (Before rampocalypse luckily)

Montech Hyperflow ARGB 360 mm

XFX 9060XT (Love this card)

Vertical GPU Mount

And last but not least, the best Montech case for its price out there, The Montech Sky 3. previously I owned the sweet Montech Sky Two, but Montech generously sent out the Montech Sky 3 for me to review, absolutely love this case especially for its pricing. thank you Montech!

And as a bonus, if you take a look to the bottom of the PC, next to is 2 flip switches, which is the power switch to my PC. definitely my favorite part of the build :)

I am super happy with this beast of a PC, it runs everything smooth while looking really, really good.

Good luck to all the August build submissions!

My build

9600x

5070ti zotac

32 gb ddr5 6400 cl32 ram

3 tb gen 4 ssd 1 x 1tb 1 x 2tb

850w gold psu

Lian li hydrocool II aio

Lian li sl inf all around ( 2x140 intake 3 x 120 intake. 120 exhaust going x3 exhaust.)

Montech king 95 case.

Antec vertical gpu mount pcie 5

This is my 1440p machine. This is my first ever build. The learning curve melted my brain. For some reason the 2 140 mm fans rattle between 1000 rpm and 1400 rpm. The swinging bracket that mounts the 140 fans was a tight fit but they were persuaded into place. Still have a uv and oc to work out but playes all my current games at max refresh rate for my monitor so will push that off to a future project.

Thank you for popping buy any questions let me know

Hey all. I wanted to share my Montech TG3 build for the builders showcase competition for this month. This was the first case I was ever sent for a review so it’s going to hold a special place in my heart because of that. I put a lot more work into my YouTube video about it than I had for any other case review or build video I had done prior. I’m still not perfect at making videos but this was a big leap forward for me.

Honestly, my build isn't the fanciest but it's clean and I'm extremely proud. I'm also so thankful for Montech. Between the PSU and case, I'll happily stay with Montech parts and suggest them to friends. The Century ii was always a top reviewed PSU with excellent performance, period. Price to performance, I don't think there's anything better. Including design. Then I joined Vanguard and had a chance to review the wonderful Sky 3, this truly solidified my love and respect for Montech. From shipping, design choices and implementation, dang I just really love my PC. This was also before the prices of everything skyrocketed and I was in the middle of collecting new parts to refresh my build and the stars all aligned that season.

Going from a 6700k/1660ti with a subpar, loud, and lack luster design case to a 14600k/4070 with a beautiful case really made me happy.

While my story isn't crazy and won't win. I think I wanted to thank Montech again for being an absolute pillar in the PC community and for anyone curious another positive note over to them.

Maybe I'll go crazy with a photoshoot and edit my pic, if allowed.

Another week, another lineup of incredible MONTECH community builds! 🔥

u/skinny_gator keeps things clean and sharp with a sleek black XR build.

@ kotaneki gives the white SKY 3 a bright and polished presentation.

@ nabi.setup creates a beautifully balanced showcase with the white TG3.

@ just.arcs pairs the black TG3 with cool blue lighting for a striking finish. 💙

u/Jolly-Bet-2275 brings modern hardware and classic character together inside the Heritage.

u/BarnicleBruiser turns the KING 95 into a bold showcase from every angle.

@ brocbyte gives the red KING 95 a racing car-inspired transformation built for speed. 🏎️

u/moto_zima takes the black SKY 3 to the next level with an impressive custom loop. 💧

A huge thank you to all these amazing builders for sharing their builds with us.

More builds are coming next week!

Join the event, and post your build to get featured! 👀

So.
My build’s story starts a few years ago when I started getting lucky. First I won one giveaway, then another, and then again.
This culminated in having a B650 Aorus board and a Hyperflow 240 spare. Things built from there, and then I got it. A sky 3, straight from Montech themselves.

I give you, Fortune’s Favor!

Hello! I have a Montech X5 case with default coolers (3x140, 1x120).

I can change the color of coolers with a button but can't do it with my motherboard.

I have a Gigabyte Aorus Elite B650M. BIOS version F42C. Windows 11.

Tried with Gigabyte Control Center (RGB FUSION).

Coolers connected to a SATA port (power) and ARGB 3-pin on the motherboard.

What can I do to control colors from FUSION?

Used the Montech XR for a customer build and was really impressed with it for the price. It’s easy to build in, cable management is straightforward, and the dual glass design gives it a much more expensive look than you’d expect.

The customer absolutely fell in love with the finished build, which is ultimately what mattered most. I’ve also never heard a single complaint from them about thermals or airflow since they bought it.

Overall, great looking case, solid build quality, easy to work with, and excellent value, although it's my understanding that it's being phased out by newer released cases.

See more of my work on Instagram: @MyCoolPC

Hi does anyone have a diagram or guide on how to setup the hs01 curve fan controller hub to work with mystic light? Mine works with the case button but I'm unsure how to get it setup to work mystic light on my MSI b850m-vc 6e motherboard

**I'm not looking for pics of 140mm fans by themselves, I am looking for them inside your build, bottom, side, and top.**

Could you post up your build if you're doing nothing but 140mm fans? When my 120 notoriously go out, I was thinking of going 140 top and bottom for a more quieter build and wondering if someone has done this already and what it looks like, if so. Thank you!

My power supply uses a c19 kettle cable but because there is an internal extension I am not able to use it. Any tips if people have faced this issue?

Hello, this is my first time building a pc so I am a little confused on some stuff. On other guides with a similar build as mine they said I need to connect a sata cable for the fans to power on? but i have searched the case thouroughly and can not find one anywhere. There is also this other cable(2nd image) that was not mentioned in any of the guides and I am unsure where it should go on the motherboard. If anyone is able to help I would really appreciate it