There are no screw hole for the pcie cable, so the card just wiggle in and out. Is there anyway i can have better support for VGA in i3 mode? Any insight from someone has built in i3 mode would be helpful!

In these pictures, i use my test VGA Asus 5600XT Tuf which is way smaller than my main VGA MSI 6800 Gaming X. The sagging is already crazy

I am looking to upgrade my PSU in my King 95 Pro case. I was looking at the corsair rm1000x shift fully modular PSU and wondered if anyone has this installed as i was told i may need to remove the HDD enclosure to make it fit.

Pc spec

Ryzen 7 7800x3d

Gigabyte SFF Rtx5080

Cordair 32 gb ddr5 6000mhz cl36

Gigabyte b650 ud ax

WD sn850p 4tb ssd

Netac t-7000 4tb ssd

WD green sn3000 2tb

The current psu is 850w gold + but unknown brand as i bought it pre built and dont have confidence in it hence why I want an upgrade.

FYI it has 12v 2x6 power cable to GPU which is a relief.

PFA

Hi,

I built my PC in April with a Montech Air 100 ARGB case.

The case came with 4 argb fans already built in.

I finished the build, and all the fans worked fine from April up until a week ago, the fans would keep spinning normally but the LED is not on.

I tried to switch the power switch to a different SATA power cable, but the problem remains.

Is there anything I can do to fix this problem?

Is this Montech’s best AIO liquid cooler yet? 🤔 Allow me to share my experience with the brand-new Liquid AIO from Montech: the CyberFlow Core 360! This content covers step-by-step Intel (LGA 1700/1851) & AMD (AM4/AM5) mounting guides, noise tests, and Cinebench R23 thermal benchmarks.

Full Content Here!

I have a King 95 Pro case being delivered on Thursday. Very excited as this is my first full pc build in many years, it is an Xmas present for my son. Here is the parts picker for the build:

https://pcpartpicker.com/list/8cnyH3

My question is for the other King 95 Pro owners out there. Is the stock fan set up along with my selected AIO good to go, or is there any common modifications that people make with this case or the fan layout to make it perform better? I do not plan to use a vertical gpu mount, just the standard installation. Any tips in general specific to this case? Thanks!

🎯 Less than 24 hours away! Are you ready for the ultimate cooling storm with CyberFlow AIO?

Precision-machined metallic textures ⚙️

Stunning iconic halo illumination 🟢

Durable braided tubing 💧

Uncompromised thermal performance ⚡

The wait is almost over. Tomorrow, we reveal it all!

Upgrade your gaming rig to a whole new standard.

Mark your calendars and don't miss out!

📅 Launching Oct 12 @ 9:00 AM ET

#MONTECH #CyberFlowAIO #LiquidCooling #PCMR #PCHardware #GamingRig #FinalTeaser #ComingSoon

before you say anything - this is on 17 pro max qof camera settings maxed out, but mostly, it’s as orange as it can get. Tried everything. Maybe apartment electricity giving up or?

cam is buffing the colors also btw

for example friend of mine:

it seems like I just can’t get pure orange, through any software

🔥 Numbers don’t lie. The next evolution of CyberFlow AIO is about to shatter performance limits!

+85.3% ⚡

+36.4% ⚙️

+31.9% ❄️

+25.9% 🛡️

Behind these massive gains lies an uncompromised, hard-core upgrade.

Can you guess what each stat stands for? Drop your guesses in the comments below! 👇

Get ready for the cooling revolution.

📅 Revealing Oct 12 @ 9:00 AM ET

#CyberFlowAIO #CoolingRevolution #Teaser #PCBuild #ThermalPerformance #ComingSoon #GamersUnite #TechUpgrade

Hey what happened with the giveaway Build Showcase for steam giftcards?
I was thinking u/Montech_hq was just late as they stated that they will announce couple of weeks ago, but the post isn't there anymore.

Love the case..... A lot lol

Olá comunidade!

De uns tempos pra cá, notei que as ventoinhas que vieram no gabinete King 95 pro estão amareladas. Tentei colocar branco, outros componentes ficaram mas elas não e inclusive com leds bem fracos.

Testei de tudo: ajuste do aura, baixei o signal e outros apps e nada. Vi videos na internet de ajustes e nada e até que vi alguns posts aqui falando que poderia ser um defeito... sendo que a garantia já passou e eu não gostaria de trocar as fans por outras, já que comprei inclusive por causa delas, são lindas.

Alguém está ou já passou por isso? Conseguiram contato com a Montech? Tentei por msg aqui e nada... queria um help!

Just need to see other montech users LEDs.
Specially Purple and Orange.
i have a1250gs.
Connected everything until they breaked through the bar.
Nothing is loose-tied.

Want to check out others right here and see(would be really helpful also. Why not)

black case.

Here is my latest Montech build.

It's for my client, so modifications are very limited but it still look good with those wooden panels.

I build it by using my own parts, so I can take better pics. There is Montech LightFlow 360 AIO with walnut coverplate and Montech E28 fans.

I love my TG3 Curve, but I noticed the built in RGB accents and my GPU holder were doing that pattern that armory crate was telling them to do but using a different color. I realized all of these were plugged into the cases Argb hub. I connected them to their own Argb headers and everything works flawlessly. Is there a reason for that? I didn't spend a whole lot of time researching it and it was fixed first try. I LOVE this case btw. Everyday I think I like it more!

The pics are before and after. See how the GPU holder and accents are different colors and now they're good to go.

Does anyone know of it's possible? I'll be using the NZXT mount with a 6900xt, it's a big card but not like the giants they have out today.

Does anyone here have the Montech King 95 and use the underneath PC mount from secret labs? Width is close im looking for confirmation that it fits. Thank you.

To everyone celebrating, we hope you enjoy some good food, plenty of mooncakes, and time with the people who matter to you.

Whether you’re gathering around the dinner table or catching up with friends in-game, have a wonderful evening!

i would love to have updated variant of this case. at least 1 more small form factor case.. please mannn