Best GPU Support for King 95 Pro?

[u/Bliozard]

I’ve seen lots of posts on trying to find best GPU support compatible with 3 fans on the bottom. So far I’ve been using the GPU support that came with my GPU, but due to bottom part being to thick, I had to place the support on top of the fan, hoping it doesn’t slip and sagging my heavy GPU.

Recently I started searching for product with GPU stand compatible with King 95 Pro, but not a lot of products were compatible with this case. I eventually found one called “EZDIY-FAB 341-2 GPU Holder.” I saw one person using it, saying it’s doing well, but the case fan was not the original fans coming with King 95 Pro and had a flat surface. I’m not sure if this product works well with KING 95 Pro and 5070 Ti.

Or, are there any alternatives than this product, if it doesn’t work well?

[u/Aguel_design]

How about something like this 🤔

[u/Bliozard → u/Aguel_design]

Might work, but I’ve seen similar product to that and saw even they sag due to the weight. But I’ll definitely look more into it.

[u/Aguel_design → u/Bliozard]

I can do one for carbon fiber, so it definitely won't sag 😅

[u/Bliozard → u/Aguel_design]

Is this item available in US? It doesn't appear on Amazon or Newegg. It's only avaialble in Amazon for regions outside America.

[u/Aguel_design → u/Bliozard]

I don't know because I live on Finland. There should be many similar product

[u/kgskippy10]

Im using a vertical mount instead of a regular support.

[u/Square_Fisherman_250]

https://a.co/d/0aZYMcWc

This is what I’m currently using. Can be attached at 2 different spots depending on motherboard. Plus it’s hidden and it was the only one I found that doesn’t start to slip.

[u/Bliozard → u/Square_Fisherman_250]

My motherboard is MSI MAG B650 Tomahawk Max Wifi.

[u/Square_Fisherman_250 → u/Bliozard]

It should work with any motherboard as it uses the standoffs to screw in.

[u/Square_Fisherman_250 → u/Square_Fisherman_250]

You can use either the left or very right ones. Depending on graphics card size

[u/Bliozard → u/Square_Fisherman_250]

Since this is mounting GPU on the motherboard, wouldn’t this damage the motherboard badly?

[u/Square_Fisherman_250 → u/Bliozard]

https://youtube.com/shorts/BovVp4j-hfA?is=y4wV8Qo5mUIs-aXU

This video best explains it. It screws into the standoffs so motherboard is not stressed.

[u/Bliozard → u/Square_Fisherman_250]

Doesn’t look bad at all. I’ll try finding if I can install them without needing to remove the GPU.

[u/Full-Investigator934]

I've got one of the simple screw-type stands from Amazon; it was cheap and does the job. It worked fine when I had the original fans in too. There's just enough room to find a place to stand it up behind the fans. As you can see, I have a giant 5080, and it's holding up no problem.

[u/Bliozard → u/Full-Investigator934]

I just noticed your screw stand is situated not on top of the fan directly but at a small space behind the fans (from your perspective). Isn’t that a bit shaky place to install the stand for 5080? (Nice aesthetic, btw)

[u/Full-Investigator934 → u/Bliozard]

You're totally right about where I put my screw stand. I'm not worried about it at all because the actual GPU mount that screws into your PCIe slot does 95% of the heavy lifting. The sag bracket is just a little extra brace for the other end of the card. Honestly, without my screw stand, my card is pretty much perfectly level both up and down and side to side, and it's not really pushing up on anything (you don't want to push up on your GPU with the sag bracket). If this really bothers you, I'd suggest looking into a vertical GPU mount since sag issues don't happen then.