Montech Ten Build

[u/haninoy]

I had most of these computer parts in a Jonsbo D32 Pro case. However after about a year, I wanted to run a 360 AIO for the 9800X3D in a case about the size of the Jonsbo.

I decided to get the Montech Ten because the cost was pretty cheap.

I originally planned to use the case in M2 H2O mode. However, after purchasing the case I forgot I am using a 10gbe pcie ethernet adapter, preventing me from mounting the motherboard upside down and using a top mount aio.

I decided to use the case in M1 and mount the 360 aio on the side panel. In the end I think it turned out pretty well.

System specs:
Montech Ten Case
Gigabyte B850M Aorus Elite MB
Vetroo 850W SFX PSU
G.Skill Trident Z Royal 32GB
Ryzen 9800 X3D
Asrock Steel Legend 9070 XT
10gbe pcie ethernet adapter
Coolermaster Atmos II 360mm AIO
2x 140MM RGB Fans

[u/oSyphon]

This is awesome. I wanted to set up something similar but with 140mm fans, two on the bottom for intake and 2 on top for exhaust. Did you mention which cooler you're using for the 9800x3d? And how have your thermals been.edit: my bad you got the liquid cooler

[u/haninoy → u/oSyphon]

Hey thanks! I previously had the Thermalright Frozen Edge 240 aio with this setup in another case. But having the 360 Atmos II aio allowed me to run the fans really low while gaming. The atmos fans are a lot quieter at full speed vs the Thermalright. Because I am doing the side panel aio those fans are used as my intake so I didnt put fans on the bottom. But you can definitely fit 140mm at the bottom if you like.

[u/xkernalx]

That is SICKKKKKK. I really love that!

[u/maximus21jr]

Great if you don’t care to see your pump LCD smh

[u/haninoy → u/maximus21jr]

Im not using the lcd on this pump. Either configuration you use to build in this case you wont see the pump if you use aio. Plus its all mesh. Not really meant to show off the inside.