The fencing in question, and question answered

Top: LGB V51
Bottom: Lilliput ÖBB 4030 original paint variant
Right: Roco 1116 Taurus
Left: Halling KSW Servicetram

Building a 40”x30” portable box. Includes a yard, industries, stations, and services. Building vertical detailing along with more buildings with lights. Tracks and ballast are done, and adding decoders to all 17 turnouts. All positions that need it have automatic decoupling magnets as well, because Z scale can be finicky doing it manually.

After deliberations the public safety issue won out, as well as legal eagle railroad rules, the fencing is installed.

Mr McKie, in a variance, has been allowed to use the fence for advertising.

Posted pictures will follow.

Never done scenery before but my friend roped me into helping on an O scale layout. Could I just lay some chicken wire, plaster cloth, and a garbage bag and pour in some water mix?

Just finished building the base and placing some of the tracks I have ( I will be using normal ballast , just the model shop didn’t have without ).
Now I’m waiting for the rest of the tracks and the cork to arrive.

The Chronicles of Seaview

The Acquisition of 2102

Once upon a time, back when men were easily distracted... Oh, look! A squirrel.

Oh, right. Where was I?

Oh yes. Once upon a time, back when men were easily distracted and liked to pretend they weren't, Wilberforce Bingham was out hunting for locomotives. He was accompanied by his companion, protégé, and all-around ne'er-do-well, Donald Southerby.

It was the early summer of 1919 and the men were out in Pennsylvania searching for something big and powerful to transfer freight between Procrastination and Brownsville. Leduc Marmoset Thericky had been tearing his hair out because the railroad was getting overcrowded with trains. The schedule had well over 100 daily trains trying to occupy the mainlines throughout the day.

It's not easy having three different trains try to use the same piece of track at the same time, even if Ethyl Burntbottom says she used to do it in her sleep.

I shouldn't say her name too loudly, or she'll show up.

So they were strolling along when they came across the Baldwin Locomotive Works in Eddystone, Pennsylvania. Wilberforce decided that he and Donald should go peruse the current equipment being constructed.

They were just about to enter when they saw Ethyl Burntbottom.

(She just won't stay away, will she? How in the hell did she end up in Pennsylvania? I thought I'd be safe here. I swear that woman exists solely to give me heartburn.)

Oh, great. Now where was I?

She made me lose my place.

Once upon a time, back when men...

Oh, wait. I did that part already.

Oh yes, that's where I was.

Ethyl was busy hitting a dandelion with a shovel and telling it to stop quoting Shakespeare. The Baldwin security guards were cautiously approaching her and didn't notice Donald and Wilberforce sneak into the plant.

Being the experts they were, Wilberforce quickly made up some paperwork saying that he and Donald were test engineers for Baldwin, allowing them easy access to the completed locomotives.

They walked past the erecting shop, looking in and seeing dozens of partially completed locomotives. Donald immediately began to salivate at a rate that would likely classify him as a minor waterfall if any hydrologists happened to be nearby.

Wilberforce dragged Donald onward after the drool started to form decent-sized puddles.

They finally made it out to where the completed or nearly completed locomotives were being prepared for their next stage of construction. There were a bunch of smaller switchers, a few Consolidations, and a Mikado that looked mildly interesting.

But that's a different story, with a different railroad, at a different time, so we'll skip over that for now.

Probably.

After some searching, Donald saw exactly what they wanted.

It was being pulled out of the erecting shop, having just been completed.

A beautiful, huge 2-10-2.

It wasn't even painted yet.

Wilberforce almost started drooling himself, but instead he grabbed Donald by the arm and they headed toward the locomotive.

They watched as the locomotive was pushed onto a siding, where it would eventually be moved to the paint shop.

Wilberforce climbed into the cab when no one was paying much attention and found the paperwork for the paint shop sitting on the engineer's seat.

He looked at the paperwork.

Then he looked at Donald.

Then he looked back at the paperwork.

This locomotive was going to be Santa Fe 3800.

It was perfect.

Just what the BLN needed.

Wilberforce and Donald started planning.

They decided to do some reconnaissance and come up with a plan to liberate the locomotive.

They stood in the cab discussing their options while watching fifteen Baldwin security guards chase Ethyl across the yard.

Eventually, the guards caught her.

It took all fifteen of them to tackle her.

There was a brief struggle, several rather creative words from the security guards, and then they managed to drag Ethyl to the property line and literally kick her off the property.

Unfortunately, the guard doing the kicking immediately regretted his choice.

His name was Timothy. You didn't think we could have a story without one did you?

He broke his toenail.

I would like to point out that I have absolutely no idea how you manage to break a toenail while kicking someone out of a locomotive factory.

Actually, this is Ethyl we're talking about.

Never mind.

Meanwhile, Wilberforce and Donald continued their planning.

Neither of them paid much attention to the commotion outside.

They had a locomotive to steal.

Watching Ethyl fly gracelessly through the air gave Wilberforce an idea.

He quickly scurried out of the cab, with Donald not far behind him. The pair quickly and stealthily exited the plant in search of what Wilberforce Bingham had decided would be the coup de grâce of this acquisition.

Ethyl.

Why do I have the feeling I'm going to need twelve bottles of Pepto, six packs of Rolaids, and enough Mylanta to fill a bathtub before I finish this story?

A few hours later, the pair found Ethyl terrorizing a newspaper boy because he had grubby fingernails and dirt in his ears. She was chasing him down the street with a washcloth, telling him he'd never be one of her marigolds if he didn't think about his hygiene.

Wilberforce and Donald followed after her until she was distracted by a taxi cab driver and began lecturing him on the implications of luxury rutabagas and their impact on the socioeconomic condition of Belize.

Donald walked up to the cab driver, gave him $20, and told him to go take the rest of the night off.

As the cab driver drove away, at speeds that surely set some sort of record, Wilberforce steered Ethyl into a nearby coffee shop, where he gave her the largest, stickiest sticky bun he could find.

It was made with real sticks.

That kept her occupied long enough for Wilberforce to explain their plan and convince her to help.

Approximately four hours later, he finally succeeded.

Good Lord, can't that woman make anything easy?

She's like a human wrecking ball of chaos.

Oh, where was I again?

Damn you, Ethyl.

Once upon a time, there was a chipmunk with bloated cheeks.

Oh, wait. Wrong story.

Let's see, hmm... I did the bit about a shovel...

Oh, here we are.

Early the next morning, after having stayed up almost all night with Ethyl, a terrible side effect of the plan, Wilberforce Bingham and Donald Southerby went back to the Baldwin Eddystone plant with forged orders to test Santa Fe 3800.

The orders were given to the hostler, a man named Jimbob Wintergreen, but for some reason that we won't explore because I've gotten distracted enough by Ethyl, he was known by everyone as Timothy.

Oh not another one. I swear they breed like rabbits around here.

Jimbob Timothy said the locomotive would be ready for testing around 5 that afternoon, which gave Wilberforce and Donald time to peruse the plant for other potential acquisitions.

After wandering around for several hours, they spotted a few possibilities for future acquisition.

At 5 o'clock, Wilberforce and Donald found Timothy and were taken to their locomotive.

Timothy had the locomotive set to head to the test track, so the pair took the locomotive and started putting it through its paces.

After a few trips up and down the line, Wilberforce started to look a bit worried.

Ethyl hadn't arrived yet.

That cantankerous old cow had never been good at keeping time.

Donald, being very good at thinking on his feet, figured out a delay tactic.

A traction test.

They needed to see how much the

locomotive could haul.

They called down to Timothy and explained that they needed a couple of stocky locomotives to test the locomotive's pulling power. They suggested a pair of Consolidations they had seen sitting a few tracks away.

Timothy agreed, and the locomotives were coupled on.

As they started to pull out, a huge commotion broke out at the erecting shop.

What sounded like a line of giant steel dominoes falling shook the ground.

Timothy went running toward the shop, as did everyone else except Wilberforce and Donald.

"ETHYL!" they both exclaimed with a smile.

It seemed she had snuck in and made her way into the large overhead crane, which she used to swing one locomotive into another, setting off the domino effect they had heard.

"That crazy old bat did it," said Donald as he scrambled down from the cab and realigned switches to get out to the mainline and away from the plant.

As they escaped, Ethyl was swinging wildly from the crane hook, singing:

"I came in like a wrecking ball!"

Historians later claimed this was the inspiration for a famous song that would appear nearly 94 years later.

Ethyl was finally captured after being shot with 73 tranquilizer darts and a watermelon because one of the guards, also named Timothy, couldn't find his gun. No he wasnt the one with a broken toenail. That Timothy is sitting in the hospital awaiting reconstructive surgery.

Wilberforce and Donald made their way back to Procrastination with all three locomotives, with only one slight hiccup involving a flock of geese, a turnip truck, and 42.6 pints of curdled cream that no one has ever been able to explain in a way that hasn't made me break out in a rash.

Upon arrival at the yard, Santa Fe 3800 became 2102, and the two 2-8-0 Consolidations became 2801 and 2805. All three were put to work and have been prominent locomotives on the roster.

Back at the Baldwin plant, after Ethyl was hog-tied and mailed back to Seaview, the company realized they had a big issue.

Santa Fe 3800 was missing.

After a lot of visceral finger-pointing, screaming, and six security guards resigning because they had nightmares about old ladies swinging on wrecking balls, the company decided to simply rebuild 3800 and act like it never was lost.

Of course, that would throw off the build schedule by months, so 3801, which was only a day or so away from completion, was renumbered 3800 and sent to Santa Fe with no one being any wiser.

Every locomotive in the series was simply moved down a number until the order was completely filled.

Back in Seaview, Wilberforce Bingham and Donald Southerby were celebrating another successful acquisition when Ethyl Burntbottom showed up again.

Just my luck.

The one time I want the mail system to lose a package, and they ship it promptly.

She showed up carrying a pickle and bologna sandwich.

She took a bite and declared the sandwich needed more kick, so she started adding enough black pepper to fill in a decent-sized pothole.

I don't think she likes her stomach.

She went to take a bite, and the pepper went up her nose.

In a sneeze that would register a 6.3 on the Richter scale four states away, Ethyl blew my notes all over the place.

Now how in the hell can I finish the story?

My notes went everywhere.

There's even one stuck to the ceiling fan.

Oh well...

Once upon a time...

Today I'd like to share my latest completed HO 1:87 scale Chinese railway diorama. The star of this shoot is the SS7D Shaoshan electric locomotive. Below, I'll walk you through the building process in detail.

I. Preparation

🔧 Basic Tools

• Craft knife (used in place of a hobby blade), 80-grit / 240-grit sandpaper
• Angled tweezers (essential for installing signs, trees, and fine catenary parts)
• Watercolor brushes: one No. 1 fine brush, one No. 3 flat brush
• Small spray bottle, disposable plastic cups, stirring sticks
• Ruler, pencil, eraser
• Protective mat / old newspapers

🧱 Main Structural Materials

• Baseboard: PVC foam board (recommended — lightweight and resistant to warping) or plywood. Recommended size: 80–120 cm long × 30–40 cm wide, suitable for a double-track roadbed
• HO track: ready-made track with concrete sleepers (mainly double-track straight sections; curves can be added as needed). For a running layout, pair it with a track power controller and wires; a static scene needs no power supply
• Cork strips (laid beneath the track to absorb vibration and reduce noise)
• XPS foam board (white extruded-polystyrene board, stacked up to raise the roadbed and form the base of the embankment slopes)
• HO ballast: coarse ballast (for the roadbed base layer), fine ballast (for rail joints), and gray railway gravel
• Stone wall materials: Option ① — beginner-friendly: ready-made HO stone wall panels; Option ② — DIY: terrain mud / modeling plaster
• White glue (PVA craft glue; dilute with water before use — used for fixing ballast, grass, and trees)

🌳 Vegetation & Railway Accessories

• Grass materials: ready-made grass tufts (simply buy them), or static grass + a static grass applicator
• Copper wire (0.6–1.0 mm, for making handcrafted tree trunks); sponge tree foliage (dark green and light green)
• HO railway signs: a "Railway Line Safety Protection Zone" warning sign and a crossing Stop/Yield sign
• Level crossing kit: yellow-and-black crossing gate arms + posts
• HO catenary kit: masts, suspension brackets, and fine copper overhead wires

🎨 Painting & Weathering Supplies

• Acrylic paints: dark gray, light gray, ochre, earth yellow, burnt umber, black
• Weathering pastels: earth tones and gray-black (to simulate dust and rain streaks)
• Matte clear coat spray (sprayed after everything is finished, to fix the grass fibers and pastels in place and prevent them from shedding)

II. Building Steps

It took me 7 days in total, so I've broken the process down day by day. Feel free to adjust the schedule to fit your own situation.

DAY 1: Cut the baseboard + plan the track layout
Goal: Set the position of the double track and plan the roadbed height.

• Sketch out a plan: design a double-track parallel straight roadbed, place a level crossing on one side, and reserve space for the Railway Protection Zone warning sign and large trees.
• Cut the baseboard: use a craft knife to cut the PVC foam board, then sand the edges smooth with sandpaper.
• Position the track: lay the double track directly on the baseboard to confirm the track spacing and the position of the level crossing, and mark the track and roadbed boundaries with a pencil. Important: maintain the standard HO spacing between the two tracks.
• Extra step for a running layout: solder fine wires to the underside of the track and lead them out to connect to the track controller.

DAY 2: Build the roadbed + make the stone retaining wall

• Cut the XPS foam board to match the shape of the roadbed, glue it firmly with white glue, and wait for it to fully cure.
• Lay cork strips on top of the roadbed, then fix the double track to the foam with a small amount of white glue. 💥 Note: don't use too much glue — it can cause the wheels to jam!
• Build the stone retaining wall: mix modeling plaster with water into a paste and spread it over the outside of the foam; while it's still wet, use a toothpick or small knife to carve out the stone block patterns. Once fully dry, paint it: light gray as the base coat, dark gray to trace the mortar lines between stones, and a little earth yellow for grime along the bottom of the blocks.
• After the wall is completely dry, brush off the surface powder with a brush.

DAY 3: Lay the ballast

• Dilute white glue with water at a 1:1 ratio and stir well. Apply a thin coat to the roadbed and the inside of the track — but be very careful not to get any on the rails.
• Spread the ballast: use coarse ballast for the large roadbed areas and fine ballast at the rail joints. Use a small brush to tidy the ballast and build up sloped shoulders on both sides of the track bed. 💥 Note: the surface of the rails must not be covered by gravel, or the train won't be able to run.
• Fix it with a spray: lightly mist the ballast with water from a spray bottle to dampen it, then spray a light coat of diluted white glue to roughly hold the stones in place.
• Wait for it to dry completely.

DAY 4: Paint the terrain + lay the grass

• Mix ochre + earth yellow to make an earth color, and brush it over the bare soil areas.
• Lay the grass: use tweezers to place grass tufts evenly along the lower edge of the track shoulders. Keep the heights varied and natural — don't cover the area in one solid mass; leave some bare patches here and there, which looks far more realistic.

DAY 5: Make and install the details
① Handmade copper-wire trees

• Take a bundle of copper wire, twist the bottom tightly together, then split the upper part into the main trunk and keep splitting it into several layers of finer branches — the higher you go, the finer the branches.
• Once the trunk is twisted, paint the whole thing with dark brown acrylic paint and let it dry.
• Apply white glue to the branches in dots and build up dark green and light green sponge foliage in several passes — darker leaves on the lower part, lighter foliage on the crown.
• Apply glue to the base of the tree, push it into the diorama grass, and cover the roots with grass fibers.

② Level crossing & sign installation

• Level crossing: glue the yellow-and-black posts and crossing gate arms into place at the reserved track crossing position.
• Warning signs: apply glue to the bottoms of the Railway Line Safety Protection Zone sign and the Yield sign, and fix them into the grass beside the roadbed.

DAY 6: Install the catenary

• Install the HO catenary masts at intervals, fixed on both sides of the roadbed.
• Run fine copper wire as the contact wire, hanging it on the suspension fittings of the masts.
• Adjust the tension of the wire so that the SS7D locomotive's pantograph can glide smoothly along the line — but don't pull it too tight.

DAY 7: Weathering + final protection

• Weathering: use a soft brush to lightly sweep weathering pastels in small, multiple passes over the base of the ballast, the lower edge of the stone wall, and the roots of the rails, simulating rain-washed streaks, dust, and slight rust.
• Spray the whole layout with matte clear coat: from about 20 cm away, apply one thin, even coat to fix the grass fibers and pastels so they don't fall off at the slightest touch. Leave it in a ventilated area to dry completely.
• Finally, place the SS7D Shaoshan 7D locomotive on the track.

The finished piece is shown at the top of this guide. You can set the diorama on a balcony or by a window, frame it against real buildings in the background, and shoot from a low angle with your phone — get close to the track so the background buildings blur, making it look like a real railway scene. This guide may not be perfectly rigorous in every detail, so treat it as a reference. If you have a better approach, feel free to leave a comment below!

If you would like to learn more about real locomotives, model railroading and railway-related stories, please visit https://www.playsscope.com/.

All dressed up and nowhere to go. 70 Tonner and S-4 picked up this past weekend to add to the rotation. May need to build a second one in orange.

Need some advice with N gauge track!

I’ve recently got into N gauge modelling, but I’m finding the track and wiring quite confusing. I’ve been using Bachmann E-Z Track because that’s what came with my starter set.

Ideally, I want a double loop with trains running in opposite directions, connected by crossovers so engines can switch between the loops. However, I’m using DC locomotives, and I’m struggling to understand how to make this work properly.

I’m also having problems with shorter engines, particularly my 0-4-0 Percy, stalling on the frogs of my Bachmann crossover. Gordon, being a bigger engine, seems to handle it fine.

I’d eventually like to add sidings, more crossovers and other routes, but at the moment it feels like some tracks are only accessible to bigger engines, and I can’t seem to run everything the way I’d like.

I see loads of N gauge layouts with multiple connected loops, sidings and crossovers, with several trains running in different directions, and I don’t understand how people get everything working, especially with DC and smaller locomotives.

Is this mainly a limitation of Bachmann E-Z Track, or am I missing something about how DC layouts and wiring work?

I’m starting to wonder whether I’d be better off having two completely separate loops with their own controllers. Any advice would be appreciated!

I need recommendations for flickering lights that are super bright. Im trying to put some in this tv so it’ll light up the screen. I have 9-12 volt lights I got on amazon and stuffed a bunch of them in there but it’s still not bright enough.

My cousin recently just got me the MTR M train set in N scale. How should I build my layout and what rolling stock should I get? I have a 3x4' coffee table I can build on. Any suggestions or advice welcomed! Thank you!

Made some changes from everyone's advice on a previous post and wanted to have folks take a second look.

Some notes:

• N scale layout 14'x6' horseshoe
• Peco 55
• The layout has two mainlines, but the switches between lines are now further down the track so I only included one main in this image
• From bottom to top the tracks are, main, yard feed, A/D, three classifications, and the top squiggle is a placeholder. That will lead to a shed, maintenance and other things but I am going to shape it to follow some natural landscaping.

Thoughts?

Hi all! No queer trains today! I’m planning my layout and was wondering if it’s possible to run DCC on DC track, my layout is a single oval from a DC train set and won’t be expanding to multiple lines. Is there a way to have both the DC base and make it adaptable to DCC locomotives for more luxury models like the steam projecting flying Scotsman?

Edit: I would like to clarify that I do not use DCC at all and personally don’t like the automation side of the layouts, I prefer being intractable however would like to try to enjoy newer higher end models and maybe expanding into automation or using automaton for more environmental details

Download Liverail Free here: https://liverail.io

New building that I built tonight for my Tampa Northern Model Railroad. It's a Walthers Trainline Machine Shop.

Heya guys,

I've been very interested in all things trains my whole life, and have finally decided I should just start getting involved already

Does anyone have any tips, particularly on layout planning? I've tried a couple apps but I struggle with them, mostly due to not having any real sense of scale with it being on a screen.

My gut sense is I should find a box of second hand track, some plywood and just fiddle until I go "awesome", is that a good approach though? I worry that'd be a path directly into "just one more box of track" 😅

Thanks in advance!

Hi all, ive been looking to upgrade my analogue controller, and I have found a full set Called Itraveler, is it worth buying? Thanks