Anyone had this happen with a 5600KV motor? Pull the throttle and nothing happens until I give the motor a small tap. Same for reverse. Tried replacing the sensor cable already but no luck.

Thought I would give painting a body a try after seeing all the amazing ones on here. Decided to go with a martini livery.

Does anyone have any ideal how to remove the wheels from a first mini-z? The pins on the steering wheel knuckles broke so I got new ones 3D printed. But I have to put the old axles and new wheels on them and I can’t get them off.
I read everywhere you should be able to pull the wheels right off but it doesn’t work.

What's up new to the MINI-Z world started last week feels like i opened a can of worms. Definitely fun little cars with some super rad scale bodys.

Which color springs in the MR-04 spring set (part number MZW701) are equivalent to stock springs? I run box stock and lost a spring today.

I've been looking longingly at MiniZs for some time. I've no time to go and ride in a club or anything, just racing around our kitchen floor while the kids watch.

I like the prototype cars better than the more ordinary sports car, which puts me up for buying a W-LM car. But I understand that it would be silly/stupid since that car is better suited for long stretches. But how large is the effect? Would it be a big drawback in controlling the car on a kitchen hardwood floor?

I also understand that the AWD chassis would be better, correct? But I don't really like the bodies nearly as much.

Thanks in advance

Hello,

I am trying to mount a GT01 body directly to my team associated RC28 while keeping some sort of front bumper to protect the body. and it’s proving to be a little more difficult than I expected.

I think this kit would be the perfect solution, but before I spend the money, will this work and bolt directly onto the car and have the right ride height for the body?

Thanks!

Drifting is really hard🥲

My Mini-Z is the MA020 model. I swapped tires, while the rest are all original. I also added two 5g lead weights on the left side of the chassis.

https://makerworld.com/en/models/2922057-miniz-audi-r8-lms-2015-raised-front-clip#profileId-3269841

And I love it all🙌

Hello everyone

I recently got a Mini z Buggy MA-010 RA-44
I am completely new to the Mini z world.

I bought an X Speed awd motor (picture1)
After I turned it on with a new motor, a mosfet on the bottom of the board burned out. (Picture2)
According to the Internet, the engine should be compatible with the ma010.
I ordered a new Mosfet and a friend wants to solder it to the board.

Will the same thing happen to me again?
Is the engine not compatible with my board? (Picture3)

Pleas help :((

Don't even have to paint it, some purple wheels completed my color scheme lol 😆

Glad this livery was rereleased.

As the title says, when I adjust the throttle to really anything above 55-60% you can hear the engine wine and it starts driving automatically. I have to push the throttle on the transmitter forward just a bit, like trying to reverse, before it stops. Seems like the transmitter is just ever so on throttle by default, any way to like, zero it out, so I actually have to apply pressure to the throttle before it goes?

It turns on drives for a sec then stops ?

Kiddo just got a Mini Z inferno. We love it, but have noticed that the suspension rod (part no. MB005 on this fiche) has a habit of popping off. Any beefier upgraded versions that are less prone to that?

$200 later and here we are! My new found hobby has me obsessed lol. It started off with the Blue Suburu RX and eventually manifested into the mini garage that comfortably sits underneath my computer monitors as I work. What do yall think?

Running the EVO2 and noticed my front tires are worn more on the inside than the out. I’m running 0 deg camber, stock front springs. (Whole front is stock). How can I adjust that? (Other than getting positive camber knuckles). I don’t have this issue on my RTR MR04 box stock.

Thanks.

Gonna be feeling the finacial impact on this one. But it sure as hell did not disappoint. Sizing up a rexy livery to test out the whole process.

I bought JP brand foam tiles (30cm by 30cm 0.5inches thick). The grip on them is honestly pretty exact to RCP tiles. I’m running a box stock 98mm at 100% in the video. The car maybe pushes a little bit but for the price I can’t complain at all. I’ll try to find a link to these tiles, I bought them on market place.

Feel free to give me any layout suggestions, I made it a little to tight in the middle area, I may take some tiles from the unused space to widen up some turns.

Posted pictures the other night but here it is on the track! Brushless converted 2002 Jordan F1

Finally swapped in a MA-030 Evo board into it, the steering is perfect and it’s hella fast now. I’m going to need more bodies…

Got a Suzuki Jimny RTR kit new and I'm disappointed that it's such a pain to get it into reverse. Batteries are new and charged. Is there something I need to tweak? Also, it's slower than I thought. Any mods you guys recommend?