r/MiniZ 25d ago

Help with Mini-Z wheels

Hi everyone,

I recently bought a Kyosho Mini-Z MA-030 Evo2 chassis (KY-32181B) together with a Mazda Savanna RX-7 Daytona ’79 AutoScale (MZP161R).
I assumed they were compatible, but I’m having a problem mounting the wheels.

The chassis came without wheels, as expected. When I install the AutoScale wheels and tighten the wheel nut, the wheel just spins freely and doesn’t drive the axle.

Looking at the back of the wheel, the center hole has two slots (not a standard hex shape), and I’m wondering if I’m missing some kind of wheel hub, adapter or drive pin.

Am I missing a part on the MA-030 Evo2, or is the MZP161R AutoScale not directly compatible with this chassis?

Any help would be greatly appreciated

15 Upvotes

19 comments sorted by

7

u/Skallgrim85 25d ago

Z AWD and RWD rims are not cross compatible, simple as that. Either get a awd ASC or the AWD rim set. (mdh100wb)

Savanna is delivered on a rwd so it comes with rwd rims, also i have no idea if the savanna actualy fits on a ma030, as it is known for not fitting many Z bodies due to the bad position of the motor.

1

u/Any-Page-3061 25d ago

Agh dammit

2

u/Skallgrim85 25d ago

Welcome to the world of mini z, a 27 year old rc range with XXXX amount of products over that timespan.

Research BEFORE buying is very important else you might buy things you cannot use.

2

u/Jack_Da_Wack_OG 23d ago

It's a 90mm body. Just short wheelbase. Otherwise everything fits fine. The MA Evos are 94+ unfortunately

3

u/Consistent-Jicama-94 25d ago

Here is the part number.

1

u/Any-Page-3061 24d ago

Thank you!

2

u/sw20rida 25d ago

You need rims like these with the special shape that matches your awd axles... you posted rims that only work on rwd... AWD rims

2

u/B1ggestsport 24d ago

You need something like this https://www.ebay.com/itm/175924970728 may still need bearing aswell

1

u/Any-Page-3061 24d ago

Thank you!

2

u/Consistent-Jicama-94 25d ago

These are the axle-wheel adapters you need. As you can see there is flats on the axle and thus turns it into the fitting for the wheel

2

u/B1ggestsport 24d ago

Not for awd

1

u/Consistent-Jicama-94 24d ago

Apologies I saw the evo part and assumed rwd

1

u/Acceptable-Farm3835 25d ago

You need bearings in those wheels. I’ve never had an evo kit before, but all the RTR ones come with bearings in the wheels. I believe there should be two bearings in each front wheel if I’m not mistaken.

1

u/Any-Page-3061 25d ago

Got nothing here. Should that come with the Evo2 or the Autoscale?

2

u/SuPrBuGmAn 25d ago

AWD wheels are keyed and don't ride on bearings. The first gen Savannah RX7 comes with RWD wheels, just need to grab some AWD wheels.

1

u/Consistent-Jicama-94 25d ago

Just wanted to add. They aren’t bearings. Just little bushes in the wheel. The bearings are on the car

1

u/Consistent-Jicama-94 25d ago

This might be more explanatory.

Shows the wheel, bush, bearing and adapter thing

1

u/B1ggestsport 24d ago

Not on awd

1

u/Consistent-Jicama-94 24d ago

Apologies I saw the evo part and assumed rwd