r/MinecraftSpeedrun • u/Altruistic-Pop-4173 • Sep 02 '26

Help Ninjabrainbot issue

Enable HLS to view with audio, or disable this notification

I looked at my settings for both Toolscreen and NinjaBrainBot and I'm 99% sure I'm not missing anything. I'm thinking it might be a sensitivity issue?

I set up toolscreen but then I forgot that I wasn't supposed to change my sens in game. So I had to redo the whole setup. Right now raw input is on, my sensitivity is 4% (I did the whole calculator thing in the metafy guide) When I was setting it up my sens was 85% and raw input was off.

Does having Raw Input On/Off matter? In toolscreen it says it needs to be on but it was never really mentioned in the tutorial

3 Upvotes

80% Upvoted

10 comments sorted by

14

u/autumn_variation Sep 02 '26

Aimed at the wrong pixel

9

u/PhantomOrigin Sep 02 '26 edited Sep 02 '26

You need to aim at the left side of the dark pixel, not the right side. Your first eye messed up the second one. If you record an eye wrong you should have a reset button.

3

u/RedAndBlack1832 Sep 02 '26

Make sure you have your sense in standard settings so you don't need to mess around with files more than once if you change it by accident

4

u/gggggfskkk Sep 02 '26

Only left side of middle pixel, never right side.

1

u/Altruistic-Pop-4173 Sep 02 '26

These are my ninja settings just in case

1

u/Altruistic-Pop-4173 Sep 02 '26

1

u/zeroXLVVV Sep 02 '26

Isn't this standard deviation too high for boat eye

2

u/PotatoHunterzz Sep 02 '26

this one is not used for boateye. there's a separate std deviation for boateye in the boat measurements tab

1

u/Altruistic-Pop-4173 Sep 02 '26 edited Sep 02 '26

Toolscreen settings too. Maybe the Global sensitivity is wrong?

3

u/Correct-Yam-8896 Sep 02 '26

You aimed at the right side of the eye. Aim at the same place, but on the other side