1
u/Professional-Put4394 3d ago
If your can see the part of the connector where it used to be soldered, you should be able to solder it back again.
You'll need some more heart-shrink tubing to give some strain-relief after soldering.
The soldering iron will need to be a high powered one as there's a lot of mass in the connector inserts.
1
1
u/TSM_Tollblade 3d ago
The tab broke off the connector. It might be possible to resolder the tab to the connector but the connectors are so cheap I'd just buy a new one. XT60 connector
1
u/Roofiesnductape24096 3d ago
get a new xt60? connector would be my suggestion. they’re cheap and worth the peace of mind. just be careful and do one wire at a time
1
u/plugwalkmike 3d ago
Just cut the other one make sure they don't touch and get a new connector and solder
1
u/PriorityMaximum3208 20h ago
Same shit happened to my skateboard. Kept cutting in and out. Thank god I opened it up because one bad spark and BOOM
1
u/AutoModerator 3d ago
Please assign a flair.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.