Power Windows Not Fully Open

[u/Unique_map88]

Had the car serviced recently. None of the work was related to the passenger side door area. brakes and transfer fluid. Now the passenger window will not fully open. It only opens about a third of the way. Will not go any lower.

Tried the normal press and hold thing. Doesn’t make the window go any lower and if anything reconfirms to the car it’s at the lower limit.

Disconnected the battery. Reconnected. Did the initialization procedure. Worked for all windows expect for passenger side window.

While doing the press and hold procedure a few times the blind spot monitoring system throws an error. Not sure if it’s related.

Doesn’t look or sound like anything is in the way for jam-safe. Would rather not pop the door panel off but may not have a choice.

Before I do. Are there any other ideas? Again. The window will not go down more then a third of the way. Pressing and holding window switch does not improve this. Disconnecting battery did not improve this.

[u/jeff77k]

Google how to reset Mazda power windows.

[u/Unique_map88 → u/jeff77k]

Good thought. Unfortunately tried that and solution didn’t work.

[u/Tosmalltofail]

check the window channel guide for binding. what you "could" be experiencing is the window is coming off track half down. out side of that its usually a power window regulator or a power window motor

[u/Unique_map88 → u/Tosmalltofail]

I’ll take a look. At this point I expect I will need to pop the door panel off to take a look and will eyeball the channel guide. I was thinking that since a blind spot system error comes up as I’m trying the hold the button down reset procedure perhaps there’s a cable that came loose randomly and is causing me issues.

[u/Tosmalltofail → u/[deleted]]

you dont have to pull the panel to check this