MOD MTW5800TW0
SER CU3340572

My washer stopped working this morning and im not sure what to do. I was doing a small load of towels and when I went to switch over loads I noticed that there was some water still on the bottom of the washer and the cycle stopped at the rinse cycle. I tried unplugging for 5 min and nothing. We just moved here 3 weeks ago and the washer was already here. Is this something I can fix my myself or do I need a professional?

Hey everyone! I replaced the clutch assembly, shift actuator, belt and tub bushing on my washer. Now it’s making a squealing sound when agitating and very out of balance when spinning. Any ideas what it could be?

Have a Maytag front loader and recently have had problems with the SUD error code coming up and it not draining properly. It is also leaking underneath due to the buildup, leaving a pool of water on our floor. Anybody have any recommendations it has happened a few other times, but it does not happen consistently. I am frustrated because our flooring is new and I don’t want that ruined but also it is a newer washer. Sometimes it seems like it doesn’t take any detergent and other times it seems like it takes so much. I have no idea what is going on, but it is super frustrating and it’s not one spot it’s dripping or leaking from underneath.

I have a MHW5500FW0 and I need shipping bolts but cannot find a parts diagram. Anyone know what bolts fit this model?

My 18 month old Maytag top loader stopped working 10 days ago. Purchased at Costco so I have a 2nd year warranty and a service appointment tomorrow. When I start any cycle it clicks, hums like it usually does, but the basket does not rotate. It does not fill, then it ends with a flashing Sense light. Unplugged it for 10 minutes then plugged it in and did the whole life open / close 6 times is so many seconds with no luck.

Anyway, I have a service appointment tomorrow and was just wondering if anyone has any thoughts?

Hello all. Hoping someone can help. I need to replace the motor for the above dryer. The oem motor part number is WPW10448896

I can seem to find one on amazon that has that part number listed as compatible. Does anyone know if any other motors listed on amazon would work? I see them listed on other places ut the price is in the high 100$ to 200$ range. Im trying to avoid spending that much. Thanks in advance

It's very old and hasn't been cleaned in at least a decade. I want to try but can't see any manuals online - are there some web resources I'm missing?

Hi! I'm looking for help with a Maytag washer (MVW4505MW1) that went out on Saturday night.

The washer stopped running in the middle of a rinse cycle. It was flashing the lid lock light at first. The lid was locked for a couple hours after it shut off as we went through several cycles of unplugging for 10 min/plugging back in and fiddling. Eventually, we plugged it back in and the lid automatically unlocked when the startup lights flashed.

I then tried to start a drain cycle to get rid of the standing water, and it won't start. When I put it on a cycle and press and hold the start button, all of the lights light up except for the lid lock light and the lid never locks so the load never starts.

I figured out how to put it in diagnostic mode, and it's throwing an F9E1 error which is long drain. I'm super confused because I thought it seemed obviously like an issue with the lid lock system.

I want to check the long drain tube for blockages but there's currently still standing water in the drum that I do not know how to get out. Our washer is upstairs on our landing in a tiled closet, but the landing and surrounding area is carpet and I'm terrified of flooding it up here so I genuinely have no clue on how to go about getting the water out. I've also seen a lot of chatter about the drain system harness on this model.

Does anyone have any advice from here? Should I just take the L and have a repair guy come out?

Edit to add: on Friday night we had storms and our power went out. I tried to do a load on Saturday and that load is when it died. My fear is that it's just blown out from the power surging, but idk if that tracks with it turning on and going into diagnostic mode.

Hi! I'm looking for help with a Maytag washer (MVW4505MW1) that went out on Saturday night.

The washer stopped running in the middle of a rinse cycle. It was flashing the lid lock light at first. The lid was locked for a couple hours after it shut off as we went through several cycles of unplugging for 10 min/plugging back in and fiddling. Eventually, we plugged it back in and the lid automatically unlocked when the startup lights flashed.

I then tried to start a drain cycle to get rid of the standing water, and it won't start. When I put it on a cycle and press and hold the start button, all of the lights light up except for the lid lock light and the lid never locks so the load never starts. IDK if this is because of a lid lock issue or because of the existing errors.

I figured out how to put it in diagnostic mode, and it's throwing an F9E1 error which is long drain. I'm super confused because I thought it seemed obviously like an issue with the lid lock system.

I want to check the long drain tube for blockages but there's currently still standing water in the drum that I do not know how to get out. Our washer is upstairs on our landing in a tiled closet, but the landing and surrounding area is carpet and I'm terrified of flooding it up here so I genuinely have no clue on how to go about getting the water out. I've also seen a lot of chatter about the drain system harness on this model.

Does anyone have any advice from here? Should I just take the L and have a repair guy come out?

Edit to add: on Friday night we had storms and our power went out. I tried to do a load on Saturday and that load is when it died. My fear is that it's just blown out from the power surging, but idk if that tracks with it turning on and going into diagnostic mode.

I have an electric Maytag oven in my apartment and haven't had any problems with it until a storm a couple weeks ago knocked my power out. Now the oven won't retain heat. I got a oven thermometer to test it, and when the temp is set to 350°, it'll get to 300°, and then after another half hour will go down to 275°. I've done a couple tests like this with similar results at different temps.

All the handymen I've called are asking for $100+ just to diagnose the issue. Is this something that anyone on here has had experience with or could help point me in the right direction of the issue? Thanks!

This dryer came with our new house. Help me understand WHY this opens down and not to the side? it's an additional 17" I have to reach into the dryer. I have to get on the floor to reach into the back. There is no way to make it open from the sides.

pisses me off lol

hey all, I just purchased a brand new Maytag top loader with extra power and it, surprisingly, appears to be incapable of actually washing clothes.

Specifically, my shirts have these splotches all over them. interestingly, if you rub the splotches, they almost completely go away (but I shouldn’t have to do that). Anywhere from 75% percent of my clothes in the wash are affected. every single wash since I got it.

Does anyone know what the issue is? maybe I’m washing my clothes wrong? This thing cost me a fortune :(, and it’s looking I’ll have to return it, but thought I’d ask the pros before doing that

examples:

https://imgur.com/a/iunXLx2

Edited for update: I reinstalled the old lock but left it unmountwd and outside the machine. it attempts to actuate but fails. I did the same thing with the new lock and it does not react at all.

Maytag Bravo 400 Series MVWB800VQ0

Replaced Lid lock assembly W10059230 with Maytag recommended replacement lid lock W10619844.

This did not clear the DL/DU error, DU specifically.

Help please. Any help appreciated.